RIEDEX dm used machines

Riedex MD280 Clean Air Extraction Brand: Riedex Type: MD280 Year of construction: Series No: Length (mm) 2,300 mm Width (m m) 1700 - 1000 mm Height (m m) 3,300 mm Suction support diameter Ø 300mm Capacity: 6,000 m³/h Pressure (Pa) 1,750 Pa Connected value: 6.0 kW, 400 V Nominal Straw: 16 A Filter surface: 46.0 m² Filter material: H2, Nadelvilz 500 gram, BIA-tested (,0.1 mg/m3) Dust container: 500 Ltr - 4 ton Noise: 68 dB (A) Cleaning: automatic vibrating motor cleaning

Mobile extraction Brand: Riedex Type: DM 300 New machine Technical data: - Motor power 7,5 kW - Nominal volume flow 5089 m³/h - max. volume flow 6000 m³/h - 31,8 m² filter surface - motorised cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 350 New machine Technical data: - Motor power 11 kW - Nominal volume flow 6297 m³/h - max. volume flow 8000 m³/h - 49,6 m² filter surface - motorised cleaning - Residual dust content

Mobile extraction Brand: Riedex Type: DM 160 New machine Technical data: - Motor power 3 kW - Nominal volume flow 1448 m³/h - Associated negative pressure 3000 Pa - Max. volume flow 2000 m³/h - 10.6 m² filter surface - motorised cleaning - Residual dust content

Mobile dust extraction Brand: Riedex Type: DM 200 New machine Technical data: - Engine power 4 kW - Nominal volume flow 2262 m³/h - max. volume flow 3200 m³/h - 14,1 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Mobile extraction Make: Riedex Type: DM 250 New machine Technical data: - Engine power 5,5 kW - Nominal volume flow 3534 m³/h - max. volume flow 5000 m³/h - 25,4 m² filter surface - motor cleaning - Residual dust content

Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock

OMSO DM44N/ PAGOmat 6HS, 2-Lane Lid Labelling Line. Age 2004, Consisting of:, Base Machine is a OMSO DM44N 2-Lane Lid Machine without the Print Heads and UV-Tunnel, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumalator as well 2 x Denesting unist each with a Vertical Magazine with Universal Helical Screws with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Label Dispenser, Label dispensers, with PLC Controls manufactured by Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Vision System to monitor the Color and positioning of the Labels 400 V, 3 phase, 50 Hz, Max. Lid dimensions: [Round Lids]: Dia. 125 mm, Height: 25 mm. [Rectangular ...

Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...

DMG DECKEL MAHO DMF 180 travelling column machining center, equipped with Heidenhain iTNC 530 control. Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure. Table size approx. 2,100 x 700 mm. Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800

BUHLER impacts dehulling machines suitable for oats, sunflower, spelt, soya and some others.. Almost not used since it was in a store Very nice conception , 18 cm impact ring hence hight output till 3 tonnes per hour according to Handbook manufacturer with an integrated diaphram to set the material flow input With an integrated device to set the speed by hand ... but also be set with speed electronical variator Many other Buhler machines available for dehulling lines : scourer MHXF, paddy table .... enquiries welcome Shipping to any destination possible

Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V140A max. Version: V.0.019 *Original price: 13554,-€ Item condition: Used, in perfect condition More products of this category can be found in our extensive EBAY assortment. More plug-in cards - new and used - can be found in our shop! International shipping costs on request! Plug-in cards and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM

320 pieces Multishuttle Dematic DMS2 STATIC Used goods built in 2019, very good condition, see pictures Load capacity: 31.5kg Load types: plastic containers, cartons, trays, containers How it works: Dematic Multishuttle 2 Overview - YouTube Negotiation price: € 2.900,- net ex stock Negotiation price: 1 piece € 5.900,- net/piece from 5 pieces € 4.900,- net/piece from 10 pieces € 3.900,- net/piece from 50 pieces € 2.900,- net/piece Very few hours of operation! Steel construction, rails, etc. available. Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVE ...

-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity

Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation