RIMA rs used machines

A used compensating stacker Rima Rs1012 S

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

Format max 470 x 320 mm format 152 x 127 mm power max 18,000 c/h Stack height 235 mm Stackhoehe Pre-stacking basket 124 mm ; ready for use

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Good working conditions

SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm

SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm

x-travel:60 mm The RIMAC BETAMATIK is a specialised collector mica milling machine for the manufacture and repair of electric armatures and commutators. It is used for the precise milling or undercutting of the mica insulation between the individual copper lamellae of a collector. The mica joints are detected by a laser optical system. A stepper motor then automatically positions the armature from lamella to lamella. The milling cutter is automatically raised during the return stroke. According to the data sheet, the machining time is approximately 0.8 to 1.3 seconds per lamella. The machine can process armatures up to a diameter of 100 mm, collectors up to 70 mm in diameter and shafts up to 500 mm in length. The maximum milling length is 60 mm. The milling spindle reaches 8,000 rpm. The machine, originally purchased around 1983/1984, was extensively modernised and mechanically overhaule ...

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle dr ...

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle dr ...

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Repair service Reparatur Service POWER SUPPLY RS10-24 A for Mazak – Repair price 100 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. Repair of other power supplies on request. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Cutter 65 ltr. CPL. Stainless steel mixing speed

Crack Control Panel type EOK Through light control for detection of hairline cracks in the foil before filling

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

MASSON MARINE GEARBOX RSD 201 / 3.978:1

MASSON MARINE GRAR BOX RSD 401 REDUCTION 4,625:1

MASSON RSD 401 RATIO 4,625:1

Rind mill

Gearbox due to re-motorization PTO drive shaft is inclusive Reduction 4,987:1