RSA st used machines

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg

Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

diameter of brush: 250 mm width of brush: 80 mm turning speed range: 1500 / 3000 U/min voltage: 380 Volt total power requirement: 2,0 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9238987 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 50 mm workpiece height: - mm wheel diameter: 250 mm grinding wheel width: max. 40 mm turning speed range: 1500 + 3000 U/min total power requirement: 1,0 / 1,4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 0,65 x 0,45 x 1,15 m Electric 380 Volt: Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technische specificaties Ingangsvermogen 1,5 / 2,4 kW Snelheid 1000 + 1500 toeren per minuut   Werkstukgegevens Materialen staal, roestvrij staal, aluminium, non-ferrometalen Dwarsdoorsneden 20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mm Ontbraamtijd secties 1 – 5, zware werkstukken 4 tot 12 sec.

An Eberhardt bread roll line is available. Head machine: Primo-Star, depositor: Mono-Star, rounding unit: Vario-Star-S, production capacity: approx. 4000 rolls/h, product weight range: 20g-85g, line length: approx. 2750mm. An on-site inspection is possible.

* General * SKU223N084 * LocationBarneveld * MakeNewmix * TypeSysyem 1000 Premium EU * No.701024 * Year of construction2008 * Main Features * MaterialStainless steel * Motor0.55 KW * Length950 mm * Specified Features - Stirrer * Stirrercheck * Shaft length1x 950mm (1000l), 1x 670mm (500l), 1x 570mm (200l), 1x 470mm (50l), 1x 400mm (25l) * Motor0,55 KW, 230 Volt * With variable speed drivecheck * MaterialStainless steel 1.4301 (304) * Information * Mounted on framecheck * Mounted on wheelscheck * With switchcheck * With switchgearcheck * Floorspace1,1 x 1,6 m * Total height2,0 m * Weight400 KG * Extra SpecificationsMixer for liquid bags2x kettle 200 l double-walled on wheelsTempering unit Single STL 1-9-B5/10-TKGStirrersNewmixMixers > StirrersBrand > Newmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

* General * SKU223N083 * LocationBarneveld * MakeNewmix * TypeSystem 1000 Premium EU * No.701024 * Main Features * MaterialStainless steel * Motor0.55 KW * Length950 mm * Specified Features - Stirrer * Stirrercheck * Shaft length1x 950mm (1000l), 1x 670mm (500l), 1x 570mm (200l), 1x 470mm (50l), 1x 400mm (25l) * Motor0,55 KW, 230 Volt * With frequency controllercheck * MaterialStainless steel 1.4301 (304) * Information * Year of construction2008 * Mounted on framecheck * Mounted on wheelscheck * With switchcheck * With switchgearcheck * Floorspace1,1 x 1,6 m * Total height2,0 m * Weight400 KG * Extra Specifications- Mixer for contents of bags with liquid - 2x kettle 500 liters: double-walled, mobile - Tempering unit Single STL 1-9-B5/10-TKG StirrersNewmixMixers > StirrersBrand > Newmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

-Hot air oven Torero Store 4 -for 4 sheets 60x40cm -Built in 2012 -10 kw -2 floors Matador Store 6.4 -per floor one sheet 60x40cm -Built in 2012 -per floor 6.7 kW -Base 6.4.600

Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.

One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: ARI Foxboro, Pneumatic Control Valve -Control valve: type ARI-Stevi 451 -Spring accumulator: ARI Type 100403429-216 -Positioner: Foxboro, Schneider Type SRI986-BIDS7ZZZNA -Connection: DN50 PN16-25 -Number: 3x control valve available -Price: per piece -Dimensions: 710/300/H270 mm -Weight: 31 kg

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

Hexagonal socket wrench SW 10 x 7 mm deep, blade made of chrome - vanadium - steel and chrome-plated, blade length approx. 125 mm, shaft D = 8 mm, head D = approx. 14.80mm transverse stitch 90 mm made of polyamide GF 30,total length approx. handle approx. 155 mm. Caption on the cross handle: Made in Germany and on the blade Crom Vanadium 10 There is still a residual stock of approx. 600 pieces available. IT can also be dispensed smaller batch sizes. 1 - 600 pieces / VS €/piece

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

GUK Cartonac 81 Stand Alone with EK 300 sheed Discharge GUK Folder FA21 / 4 S2 SVA 730 Cartonac 91 with mobile base 3 folding pockets, 2 blind pockets Feed table with sideshift for plano formats max. 215 x 450 mm Min. Format unfolded 90 x130 mm Power 300 FS / min Suspension device for shed discharge EK 300 Control cabinet right, Min. Unfolded format: 60 x 15 mm Optional: Max. Unfolded: 215 x 450 mm Paper weight 50-60gr / m² (single-layer), 37-50gr / m² (multi-layer) Space requirements. 1,20m x 1,40m Power requirement: 2,1KW, 400V 3 Ph, 50 HZ Compressed air requirement: 6 bar / 15l / min (for control switch or optional pneumatic marking device) Stepless mechanical drive for folding machine Pressure-vacuum pump. included Mobile substructure Code reader Argus 4 counter drive motor

Steel pressure tank, enamelled (last content: fruit juice), operating pressure: 3 bar approx. 16.000 liters used - in very good condition UNI-KINN B-Nr. 19-801 GL Tank with vaulted bottom Operating pressure: 3 bar Measurment and Weight: Diameter: approx. 2.400 mm Total length: approx. 3.700 mm Weight: approx. 3 t on the top: 1 x air vent NW 50 on the front dished bottom: 1 x manhole 400 x 300 mm swiveling 1 x flange connection NW 50 1 x flange connection NW 40 as outlet Otherweise see photos

IN STORAGE - Capacity: 38 mm ? 152 mm dia. bar Length: 2.4 m ? 11.5 m 38 mm ? 216 mm dia. tube Speed: 20-180 FPM at 17° Pass line: 927 mm Rolls: 1 straight roll dia. 508 mm ? 660 mm width Roller bearings Drive: 150 HP motor, 400/1200 RPM, 250 V DC Gearbox: Total ratio 5.13:1 high 15.4:1 low sheave ratio 2:1 Dimensions: 6400 x 5530 x 184 ? L x D x H Features: Trough & pusher buggy Entry guides Total line length: 30 m

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 – 1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

New Bosch Starter 24 volt 9 teeth Bosch number 001417001

Bosch used but functional 24 volt Starter Bosch number 00141416013 9 teeth

used Stetchfolienbanderollierer Power: 120 pallets / h Masch. Nr. 300426

Abbot dressing plant for chemical (Basic) media (ammonium sulphate) the plant has been used year 2010 (pump 2012) 1 x, then the company has been closed with wild diaphragm pump with ARTA dry clutch DN15 - DN150 complete documents, certificates, declarations of conformity of the individual components possibly Verohrung to but not part of the sale 2011 was once again a wild pulsation dampers for 2800,-€ upgraded Material - new price 17.000,-€, used only by the finest components from ARTA, Düperthal, wild

Stichelbock, Stitch Grinding Machine Scripta, very good condition, Collets. More information on request Special price