6 SANGIACOMO eccentric presses used machines

pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3 ...

SANGIACOMO T200 RCE 200T eccentric press was built in 2017 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking, stamping and deep drawing. Its wide range of machining capabilities, combined with a press force of 200 tonnes, makes it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 RCE features an intermediate wheel-pinion gear system. It provides high press force at a reduced nominal speed. As a result, the drive power can be used effectively when operating under high loads. The gears operate in an oil bath, ensuring proper lubrication of the drive components while reducing their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The press also has an overload protection system that protec ...

SANGIACOMO T200 DM-DB 200T eccentric press was built in 2018 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking and stamping. Its wide range of machining capabilities, combined with a press force of 200 tonnes, make it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 DM-DB features a drive system based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution ensures uniform torque transmission, which translates into a smooth working cycle. All drive components are continuously lubricated by a central lubrication system to minimise their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The open side wall enables the feeding of material strip. The press has ...

pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1300 mm   space requirements -front/back-: 1100 mm   total height: 2150 mm   total weig ...

Mechanical stamping press manufactured in 2008. This SANGIACOMO T250 RCE features a nominal force of 250 t and an adjustable stroke ranging from 15 to 220 mm. It has a maximum die surface of 800 × 1,450 mm and a closed die maximum height of 662.5 mm. If you are looking to get high-quality stamping capabilities, consider the SANGIACOMO T250 RCE machine we have for sale. Contact us for further details.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 580 mm   table surface (front-back): 360 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 110 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 9 mm   stroke max.: 76 mm   stroke rate (max.): 140 /min   main drive power: 2.2 kW TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 214 mm ELECTRICAL SPECIFICATIONS   total power consumption: 2.25 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 1.08 mm   space requirements -front/back-: 1.05 mm   total height: 2.1 mm   total weight approx.: 1800 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   European CE st ...

Single column - eccentric press WEINGARTEN type ERV 40Masch. No. 537 / 65 Year of construction 1965Compressive force 40 ton. Projection 230 mmTable size 570 x 470 mmPlunger area 250 x 200 mmClamping pin hole 40 mmInstallation height max. approx. 520 mmStroke adjustment 8 - 88 mmPlunger adjustment range 63 mmStroke rate 70 strokes per minuteDrive power 3 kWNetz connection 380 volts, 50 Hz- Table height adjustment- Overload protection by crushing plate- Clutch-brake combination by WEINGARTEN friction threaded coupling-

Single column - eccentric press WEINGARTEN type ER 63Masch. No. 52A / 63 Year of construction 1963Pressure capacity 63 ton. Projection 280 mmTable surface 630 x 530 mmAdjustable plunger stroke 8-100 mmPlunger adjustment 63 mmStroke rate 65 strokes / min. Engine power 4 kWNetz connection 380 Volt, 50 Hz- Clutch-brake combination by WEINGARTEN friction threaded clutch- Electrical stroke release via foot switch- Wheel counters- Overload protection by crushing plate- Front crankshafts Support bearingSpace requirement L x W x H 1500

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air