4 SCHMID hydraulic fine blanking presses used machines

CONTROLS   PLC PRESS DESIGN   quick die change system: yes SLIDE   total force (nominal): 630 to   stroke: 125 mm V-RING   nominal force: 320 to TOOL DIMENSIONS   lower table (left-right): 800 mm   lower table (front-back): 800 mm   shut height max.: 420 mm STRIP-FEEDER   band lubrication system: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6800 mm   space requirements -front/back-: 3300 mm   total height: 3730 mm   height above floor level: 3005 mm   height under floor level: 725 mm   total weight approx.: 26000 kg ATTACHMENTS -FINEBLANKING PRESS-   autom. tool clamping device: yes   light barrier: yes   decoiler: yes   leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995)

CONTROLS   PLC LAUER SLIDE   total force (nominal): 320 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 10 mm/s   working velocity max.: 44 mm/s COUNTER RAM   nominal force: 63 to   stroke: 30 mm V-RING   nominal force: 100 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 500 mm   lower table (front-back): 500 mm   upper table (left-right): 695 mm   upper table (front-back): 730 mm   shut height max.: 650 mm DECOILER   sheet width max.: 250 mm   sheet width (min): 40 mm   coil weight max.: 1250 to   max. diameter of coil: 1300 mm LEVELLER UNIT   sheet width max.: 250 mm   sheet thickness max.: 5 mm   sheet thickness min.: 0.8 mm   number of leveller rolls: 11   feed velocity min.: 4 m/min   feed velocity max.: 12 m/min STRIP-FEEDER   feeder type: grip feeder   she ...

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE   total force (nominal): 400 to   stroke: 200 mm COUNTER RAM   nominal force: 100 to   stroke: 30 mm V-RING   nominal force: 200 to   stroke: 30 mm TOOL DIMENSIONS   lower table (left-right): 650 mm   lower table (front-back): 650 mm   shut height max.: 420 mm   passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 12 mm   feed velocity max.: 30 m/min   feedstock transport direction: right to left LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 60 mm   sheet thickness max.: 12 mm   sheet thickness min.: 1 mm   integrated feed function: yes STRIP-FEEDER   sheet width max.: 400 mm   sheet  ...

CONTROLS   PLC SIEMENS S7 SLIDE   total force (nominal): 630 to TOOL DIMENSIONS   lower table (left-right): 900 mm   lower table (front-back): 900 mm   shut height max.: 900 mm

CONTROLS   PLC SIEMENS SIMATIC HMI SLIDE   total force (nominal): 320 to   stroke: 200 mm COUNTER RAM   nominal force: 63 to V-RING   nominal force: 100 to TOOL DIMENSIONS   shut height max.: 360 mm DIMENSIONS / WEIGHTS   total weight approx.: 18000 kg The system was fitted with a new control unit approximately 1.5 years ago

pressure: 17,0 kN stroke: 60 mm throat: 105 mm Working height from to: 75 -180 mm table surface area: 170 x 130 mm spindle diameter: 25 mm weight of the machine ca.: 35 Kg dimensions: 260 x 130 x415 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1,5 kN stroke: 40 mm throat: 70 mm Working height from to: 75 - 170 mm table surface area: 115 x 70 mm weight of the machine ca.: 11 Kg dimensions: 115 x 175 x 290 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 17,0 kN stroke: 40 mm throat: 110 mm Working height from to: 70 - 220 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 60 Kg dimensions: 310 x 190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 27 Kg dimensions: 160 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 4,5 kN stroke: 40 mm throat: 95 mm Working height from to: 95 - 240 mm table surface area: 160 x 110 mm spindle diameter: 25 mm weight of the machine ca.: 24 Kg dimensions: 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy,  ...

pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 kN stroke: 40 mm throat: 73 mm Working height from to: 60 - 150 mm table surface area: 115 x 70 mm weight of the machine ca.: 10 Kg .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26,0 kN stroke: 60 mm throat: 110 mm Working height from to: 70 - 250 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 46 Kg dimensions: 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 34,0 kN stroke: 40 mm throat: 130 mm Working height from to: 80 - 240 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 80 Kg dimensions: 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 34,0 kN stroke: 40 mm throat: 130 mm Working height from to: 80 - 240 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 80 Kg dimensions: 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with 3-jaw lining Röhm - 200 mm - 15 pitch

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Centrifugal pump Manufacturer: W. Schmidt K.G. Bretten. Type: Delta A 218/1 Usage area: wine pump Engine: Power: 1.5 HP Revolutions: 2840 RPM In very good condition!

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!