4 SEIGER cycle lathes used machines

Key data: 800 mm, 4000 mm

Description Seiger SLZ 800E cycle lathe incl. milling unit Details Machine no. 4443 Year of construction 2008 Control Siemens Sinumerik Turning diameter 800 mm Turning length 4,000 mm Face plate 800 mm, 4 jaws Face plate 500 mm, 4 jaws 3-jaw chuck 400 mm Lynette up to 450 mm (2 different) Accessories various jaw sets powered tool Permissible workpiece dimensions: between tips without setting stick 2,000 kg with a setting stick 2,200 kg with two sets 2,500 kg flying in the face plate 750 kg Machine dimensions incl. cladding 2,000 mm + Tip Wide x 2,750 mm x 2,000 mm incl. documentation

turning length: 1500 mm greates pass round over bed: 490 mm turning dia. over face-slide: 280 mm control: Heidenhain Manual Plus Speed range - up to: 3000 U/min spindle bore: 65 mm power capacity - workpiece power: 12/16 (100/60%) kW weight of the machine ca.: 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: total power requirement: 15 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 2000 mm : 980507 x-axis: 7000 mm z-axis: 10000 mm : 65 mm total power requirement: 15 kW weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1010 mm, 3000 mm

Cycle lathe Seiger SLZ 1000 Year of construction 2009 Cycle lathe Seiger SLZ 1000 Year of construction 2009 Center width 3000mm Circulation over bed 1010 Circulation via face slide 650 Drive at 100% ED 37KW at 60/ ED 52KW Max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z Feed force max 16000N Control Heidenhain Manual Turn with face plate and steady rest The offer is aimed exclusively at tradespeople within the meaning of §14 BGB

turning diameter: 1600 mm turning length: 6200 mm control: Siemens type: Sinumerik turning diameter over slide rest: 1300 mm transmission ratio: . 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 630 mm bed width: 750 mm live tooling: steady: 1200 mm steady: 670 mm steady: 408 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your busines ...

turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 820 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessorie ...

turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 450 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min live tooling: total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items ...

Working range Center distance: 1,500 mm Travel over bed: 570 mm Travel over cross slide: 340 mm Cross slide travel: 290 mm Bed width: 350 mm Spindle Spindle head DIN 55027 size 8 Spindle bore: 93 mm Speed range: 1–3,000 rpm Main drive: 20 kW AC motor Tailstock Quill diameter: 90 mm Quill stroke: 180 mm Mounting: MK 6 Feed Feed force X: 7,000 N Feed force Z: 10,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 10 m/min Machine Weight: approx. 3.6–3.9 t Dimensions: approx. 3,300 × 1,800 × 1,900 mm Equipment Heidenhain Manual Plus cycle control Heidenhain AC servo drives ZF two-speed gearbox (electrically switched) 3-jaw wedge bar chuck Ø250 mm Face plate Ø500 mm Fixed steady rest Tailstock with live center Multifix tool holder Parat 4-station turret Reinforced coolant pump Machine feet Accessories Multifix tool holder package Various turning holders Measuring equip ...

Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests . However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors . Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 ...

turning diameter:500 mm turning length:1500 mm spindle motor:16 kW Spindle RPM:1 - 2500 1/min taper in tailstock MT:5 tailstock quill stroke:160 mm tailstock quill diameter:70 mm total power requirement:22 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3,2 x 1,8 x 1,4 m Machine with Heidenhain Manual plus control - Multifix quick tool change device - 3-jaw chuck - sliding splash door - various accessories.

turning diameter:1250 mm turning length:6000 mm spindle bore:130 mm turning speed range:5 - 710 U/min turning diameter over bed slide:850 total power requirement:37/52 kW weight of the machine ca.:16 t dimensions of the machine ca.:12 x 4 x 2 m 1 Lynette ( fixed ) Cycle-controlled HEIDENHAIN

turning length:2000 mm control:- total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:3800 x 1800 x 1850 mm swing over bed:500 mm swing diameter over face slide:280 mm control:Zyklen-Steuerung Heidenhain bed width:350 mm Documents:vorhanden

turning diameter:1250 mm turning length:6000 mm spindle bore:130 mm Turning rate:5 - 710 U/min. turning diameter over bed slide:850 total power requirement:37/52 kW weight of the machine ca.:16 t dimensions of the machine ca.:12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady

Seiger SLZ1000 (2009) – Short Details - Type: Heavy-duty cycle lathe (Zyklen-Drehmaschine) See picutres for specs The SLZ1000 is known for its stability, precision, and suitability for heavy-duty turning tasks, especially with large or long workpieces Find more here - / Contact us at -

Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...

swing diameter: 370 - 800 mm weight of the machine ca.: 650 kg dimensions of the machine ca.: 2*0,4*1,3 m Open steady rest / setting block - fixed with 4 quills Bed width approx. 360 mm Total base width approx. 720 mm Centre height approx. 500 mm Space requirement approx. 1950 x 400 x 1300 mm Weight approx. 650 kg Working range: approx. Ø 370 - 800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-

turning diameter: 1800 mm turning length: 600 mm control: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mm spindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/min max. torque on the spindle: 9000 total power requirement: 38 / 52 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6x3x2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used lathe with numerical control HEIDENHEIM PLUS Basic parameters: Diameter: 490 mm, Length 1000 mm Max. diameter over cross slide 280 mm Bed width: 350 mm Spindle bore 65 mm Main motor 12/16 kW Max. speed 2500 /min Feed range 0.01 - 3 mm/rev. Quill stroke 160 mm Quill bore 70 mm Dimensions 2800 x 1800 x 1400 mm Weight 3.2 tons

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Tip height: 300 mm centre distance: 1500 mm gr. Turning diameter over bed: 625 mm spindle bore: 105 mm spindle retainer: Gr. 8 mm taper of tailstock Quill: 5 MK spindle speed: 6.6-2000 RPM elect. Supply: 400 V, 15 kW space: 4400 x 2050 x 1820 mm weight: 5200 kg

turning diameter: 630 mm turning length: 200 mm control: MTC K turning diameter over slide rest: 360 mm turning speeds: 1800 U/min 3-jaw chuck: 315 mm Holder Multifix: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%):  ...