5 SIDEL blow molding machines used machines

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Sidel SBO 6 series 2 manufacturing year 2000 with full upgrade by Sidel 2024 Capacity 7.800 bph Set for quick change molds Personnalisation for preform neck 29/21 Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel Caterpillar oven & blowing wheel for 6 molds Solenoid valves Sidel Universal type Retrofit of elongation sensor PCC Sidel version V2.02 Sidel electrical cabinet Machine in production till end November 2025 Excellent blowing machine

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised

PET bottle blow moulder, with a production capacity of up to 4000 b/h (depending on the format). For formats between 0.25lts and 3lts. Composed of: -. Furnace for heating preforms composed of 6 heating modules of 8 infrared lamps each. -. Preform Transfer Wheel -. Two-stage compressed air blowing body, low-pressure pre-blowing and subsequent high-pressure blowing. -. Bottle Transfer Wheel Delivered with pallet turner. DOCUMENTATION AVAILABLE

PET blow moulder SIDEL SBO 18 The machine was upgraded in 2006 with a new program for an output of 26,500 bph. The machine includes preform tippers for 2 octabins each. Preform steep conveyor to the inlet into the machine.

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Neck: PCO 1881 // Output: 12000 U/h

Neck: PCO1880, 1881 // Output: 24000 U/h

Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: Good Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com

Used Used Blower Sidel PET 10/10 Four 1994: Year: 1994 Condition: Good Used Blower Sidel PET 10/10 Four 1994: Model: SB010/10 FOUR Year: 1994 Speed: 10.900 bottles/hour Preform: 1881 15 gr PCO 1881 (0.5 l) and 26.5 gr ? (1.5 l) Type: rotary Number of molds: 10 Air recovery system not in place Refrigeration unit included AIR COMPRESSOR VAN TECHNOLOGY Model: VAN-37 VSD Year: 2014 Speed: 330 m3/h 10 bar Stages: 1 screw stage ? 1 set; two sets are provided to ensure production continuity in the event of a failure of one set. The set includes a screw compressor + VAN-22 kW booster. AIR COMPRESSOR KOMNINO Model: KP-1000-11/0.8 Stages: 3 Booster 10 bar Safety protections Code: W 108 More details: https://bottlingscout.com

Used Used Complete PET Sidel-Krones 18.000 bph: Year: 2000 Condition: Good Used Complete PET Sidel-Krones 18.000 bph: Product: Still water Speed: 18,000 l/h 2 lt (? 92) Formats: 0.5 and 2 lt Preform tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling and capping monoblock composed of: SIDEL SBO 16 Series 2 blower Type: rotary Number of molds: 16 (molds not included) Complete set included for Alaska neck processing Air recovery system NO CHILLER SIDEL ALSIM filler Year of manufacture: 2002 Rotation direction: counterclockwise Number of valves/taps: 63 Filling type: gravity Valve type: mechanical Pressurized cabin with filters AROL capper Number of heads: 12 Pre-threaded plastic cap: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (we have the drawing) Distribution system: pick & place COMBI OVERHAULED IN LATE 2024 Cap elevator: Manufacturer: AROL Type: mechanica ...

Used Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Condition: Good Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Speed: 7.200 bph sul 1.5 l Model: sbo 6/10 serie 1 Number of cavities: 6 Bottle neck format 29/25 mm Preform elevator/orientator Stamp not included Worked hours: 47.000 Safety protections Code: W 84 More details: https://bottlingscout.com

Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: Good Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Condition: Good Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Speed: 16.000 bph Model: sbo 16/16 Number of cavities: 16 Preform tipper Preform orienter Safety protections Code: W 77 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel 16.000 bph: Year: 2002 Condition: Good Used Blow Moulding Machine Sidel 16.000 bph: Year: 2002 Speed: 16.000 Bph Number of heads: 12 Preform elevator included Preform unscrambler included Compressor NOT included Chiller NOT included Stamp NOT included Neck measurements: 1881 Safety protections Codice: W 88 Code: W 88 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 6: Year: 2002 Condition: Good Used Blow Moulding Machine Sidel Sbo 6 Year: 2002 Speed: 10.000 bph Number of cavities: 6 Chiller not included Compressor not included Preform unscrambler Preform elevator Preform tipper Safety protections Code: W 89 More details: https://bottlingscout.com

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...

Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Used SIDEL Labeling Machine – SIDEL ALFA High-speed rotary labeling machine designed for applying plastic wrap-around labels to PET bottles in large-scale beverage production lines. The SIDEL ALFA labeling machine offers reliable performance and is suitable for high-capacity bottling operations. General Information - Manufacturer: SIDEL - Model: SIDEL ALFA - Year of Manufacture: 2001 - Machine Direction: Right to Left (R–L) Technical Specifications - Production Capacity: 45,000 bottles per hour - Bottle Plate: 36 - Bottle Size: 0.5 L PET bottle Labeling System - Label Type: Plastic labels - Application: All-around / wrap-around labeling Key Advantages - Proven SIDEL labeling technology - High-speed production capacity of up to 45,000 bottles per hour - Suitable for 0.5 L PET bottle formats - Designed for plastic wrap-around labeling - Ideal for integratio ...

Information about the machine Machine type: Sidel Rollquattro F15 Machine Number: 4129 Year of Make: 2011 Operating hours: 36,484 hours Capacity (nominal capacity): 26,000 bottles/hour Technical data The Sidel Rollquattro F15 is a high-performance labeller designed to handle different bottle sizes and shapes. It offers reliable and accurate roll-fed labeling with a nominal output of 26,000 bottles per hour. Key features Suitable for PET and glass bottles Precise roll-fed labeling High cost-effectiveness and operational reliability Spare parts A wide range of spare parts is available for the machine. Spare parts can also be offered separately on request. Available spare parts (examples): Control Components Labeling units Sensors and Drives A full list of available spare parts can be provided upon request. Condition of the machine The machine is i ...