STAMFORD hc used machines

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Stamford HC634K2 - Used - 1100 kVa

BHKW engine type HCI534E2 for sale Combustion engine TEDOM type DC16 1-013-826. The motor block was only completely replaced in May 23 It is still entitled to EEG compensation until 2031. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Stamford AC Generator HVSI804R2 Generators from 2014 with 0 operating hours, 1 available 10,500 V / 50 Hz. Manufacturer: Stamford Model No.: HVSI804R2 Type: AC Synchronous Generator Serial Number: P16B113960 Power [KVA]: 1,742 Voltage [V]: 10,500 Frequency [Hz]: 50 Current [A]: 95.8 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 6.100 Dimensions LxWxH [cm]: 240 x 200 x 180

Key data: 700 KW, 1000 kVA, 400 V

Used power generation unit consisting of MWM / Deutz gas engine and STAMFORD (Newage) generator. Used power generator set consisting of MWM / Deutz gas engine and STAMFORD (Newage) generator

Key data: 940 KW, 1175 kVA, 415 V

STAMFORD PE734A2 Generator – 1175 kVA / 940 kW Used STAMFORD AC generator, model PE734A2, previously operated with an MTU 4000 series engine. Specifications: 1175 kVA, 940 kW, 415 V, 50 Hz, 1500 rpm, 3-phase. Operating hours: approx. 27,000 hours. Used condition, as shown in the photos.

MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

STAMFORD Synchronous Generator HVSI 824 F2 2788 KVA 10,500 V 153.3 A 50 Hz, 1500 1/min. Accessories: - 2 sets winding PT100 - AVR MA327, PFC-3 COMPLETELY RECONDITIONED, restored, windings impregnated

BRAND NEW AVR BY STAMFORD AVR regulator MX321-2 E000-23212 Board Still in factory packing. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Key data: 2640 KW, 3300 kVA, 400 V

STAMFORD Synchronous Alternator LVSI 824 F2 3300 KVA 400 V 4763 A 50 Hz, 1500 1/min. Tech. Equipment: - 2 sets of Winding PT100 - AVR MA325, PFC-3 COMPLETELY OVERHAULED, restored, windings impregnated

For sale is a Stamford LVSI 824 F2 generator with the serial number 0852287/01. This model was originally paired with a Jenbacher 616 engine with the design number B480. The generator has an output of 3,080 kVA at an output voltage of 690 V. The year of construction is 2013, the operating hours so far are 66,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.

Engine Brand: STAMFORD, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 2742.4 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218851, , = More information =, , Empty weight: 2.500 kg, Type number: PI734E2 LOSSE GENERATOR 1900KVA

Key data: 236 KW, 295 kVA, 400 V

2 - Stamford HC Synchronous Generator Bearings. I434 D2 34,000 hours of battery life. Generator comes from a gas CHP plant. The CHP (and generator) was used for 34,000 hours with partial load of 135 kW.

1) Four-stroke engine Jenbacher J 612 GS-J03, operating hours: under 15,000h, ISO standard output: 2,058kW, design: V 60°, number of cylinders: 12, bore: 190mm, stroke: 220mm, displacement: 74.85l, input power: 4,474kW, mixture: 692kW, oil: 204kW, engine cooling water: 315kW, exhaust gas when cooled to 180°C: 638kW, exhaust gas when cooled to 100°C: 909kW, surface heat: 79kW, rated speed: 1,500/min, moment of inertia: 56.67kgm², direction of rotation (viewed from flywheel): left, radio interference suppression level acc. to VDE 0875: N, starter power: 13kW, starter voltage: 24V, mean piston speed: 11m/s, length: 4,246mm, width: 1,886mm, height: 2,503mm, engine dry weight: 9.5t, engine operating weight: 10.3t, 2) Generator Stamford LVSI 804 W, rated output: 2,643kVA, drive power: 2,058kW, rated active power cos φ=1: 2,004kW, rated active power cos φ=0.8: 1,986kW, rated apparent powe ...

Generator of the Jenbacher 312 Newage engineers GmbH 664 kW 800 kVA Can we gladly create an offer of a generator maintenance

Generator from DEUTZ 616 V16 Newage Engineers Ltd. 664 kW 830 kVA We are also happy to make an offer about generator maintenance

Generator from DEUTZ 616 V12 Newage Engineers Ltd. 664 kW 830 kVA We are also happy to make an offer about generator maintenance

Key data: 2012 KW, 2515 kVA, 11000 V

Tested generator in good condition for sale. Data plate shown in the photo. Please inquire via email.

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 5275 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 320 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 450 , Generator Hz: 50 , Generator Volts: 380/415 , Generator Amps: 684/626 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-hc544c-generator-450- kva-used/40, , = More information =, , Year of construction: 1010, Empty weight: 4.850 kg, Type number: HC544C Generator 450 KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 2850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 558 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 380/415 , Generator Amps: 760/696 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-hc544d-generator-500k va-used/239, , = More information =, , Empty weight: 3.750 kg, Type number: HC544D Generator 500KVA

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to pri ...

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available