8 STRATASYS 3d printers used machines

2014 Dimension SST 1200ES - washer included and a lot of washing ”powder” and build plates. - Trolly

STRATASYS F270 FDM 3D printer was built in the United States by STRATASYS. The machine is used for prototyping and production of components with complex geometries in the FDM technology, which involves applying successive layers of molten material according to pre-calculated print paths. The process uses a combination of a build material (ABS, ASA, PLA) and a support material (QSR). 3D printing is performed inside a sealed work chamber by two print heads. Throughout its lifetime, the F270 industrial 3D printer has operated for a total of 17000 hours and has been regularly serviced. During the service work, the touchscreen display, power board, material drawer rail, material feed lines to the heads and Y-axis gantry were replaced. The STRATASYS 3D printer is offered with additional print heads. Technical specifications of the STRATASYS F270 FDM printer - software: GrabCAD Print -  ...

3D Printer Stratasys Fortus 380mc (2017) Ideal equipment for companies dedicated to prototyping, tooling manufacturing, and serial production of functional parts. Operating hours: 689 h (very low usage) Technology: FDM Build volume: 355 × 305 × 305 mm Licenses and compatible materials: Nylon 12, PC-ABS, SR110 soluble support Accessories: Cleaning station for SR110 soluble supports 20 build trays Recently renovated parts: pulleys, belts, fittings, guide tubes Drying station with full maintenance (summer 2025) High precision and reliability in industrial environments. Low cost per part for medium and large production runs.

2013 Stratasys 360mc Great condition It has built in a compressor so no external air supply is needed. It has an external 3phase transformer.

Stratasys Objet24 Specifications Build Volume - 234 × 192 × 148.6 mm (9.21 × 7.55 × 5.85 in) Layer Thickness & Resolution - Layer Thickness: 28 microns (0.028 mm) - XY Resolution: 600 dpi - Z Resolution: 900 dpi Accuracy - ±0.1 mm Materials & Technology - Technology: PolyJet (material jetting with UV curing) - Materials: VeroWhitePlus™ (model), FullCure 705 (support) Printer Size & Weight - Dimensions: 825 × 620 × 590 mm (32.5″ × 24.4″ × 23.2″) - Weight: ~106 kg (234 lbs) Power & Connectivity - Power Requirements: - 100–120 VAC, 50–60 Hz, 7 A - 220–240 VAC, 50–60 Hz, 3.5 A - Network: Ethernet (TCP/IP) Find more here - / Contact us at -

Manufacturer: Stratasys Model: F370 Year of Manufacture: 2020 Operating hours: 3,493 Construction volume: 355 × 254 × 355 mm Variety of materials: ABS-M30, ASA, PC-ABS, TPU 92A, etc. Reliability: Closed build chamber with controlled temperature User-friendly: touchscreen, easy material handling, automatic calibration Software: GrabCAD Print compatible Power connection: 230 V Condition & Accessories: Very well maintained, no damage Fully functional 2. Material print head for CF material included Various printing materials included (some leftovers, but also originally packaged spools) Find more here - / Contact us at -

For sale is a Dimension SST 1200 3D printer from Stratasys. Details: Technology: FDM Max. print size: 254 x 254 x 305 mm Supported Material: ABS Nozzle is clogged and needs to be cleaned! some filament spools and platforms are included The printer is in a used but well-preserved condition, after cleaning the nozzle and drying the material, the printer is ready for use again.

Manufacturer: Stratasys Model: F370 Year of Manufacture: 2020 Type of Machine : 3D Printer Printing hours: 5,088 h KEY SPECIFICATIONS - Technology: Fused Deposition Modeling (FDM) - Compatible materials: ABS, ASA, TPU, PC-ABS, ABS-CF10, PLA, QSR support - Extrusion system: Stratasys F123 Series extrusion heads INCLUDED ACCESSORIES AND MATERIALS The unit is sold with a comprehensive set of accessories and materials: Extrusion heads: - 1x used F123 Series ABS-CF10 extrusion head (708 operating hours) - 1x used F123/F770 Series Diran extrusion head (539 operating hours) - 1x used F123 Series extrusion head (1,307 operating hours, currently in use with QSR support) - 1x used F123 Series extrusion head (1,238 operating hours, currently in use with ABS) Build trays: - 8x new standard build trays - 10x new high-temperature build trays New materials (sealed): - 1x SUP4000B black (6 ...

Build volume size 914x610x914 Special features of washbasins + ALL material licenses as of 2018 Processed Materials ABS, ASA, PC-ABS, solvent support material Accessories: - Cleaning Station (heated ultrasonic bath for the removal of soluble support structures, dimensions: 950x650x770mm), - div. Accessories and spare parts

Full-color multi-material 3D printer J720 Dental for use in the laboratory. Very good condition., Installation space in mm (x/y/z): 490x390x200, Layer thickness: up to 14 microns, Dimensions in mm (w x h x d): Printer: 1400x1260x1100 Material cabinet: 670x1170x640, Weight in kg: Printer: 430 Material cabinet: 152, building material: Dental Materials - VeroDent (MED670) and VeroDentPlus (MED690) • Vero™ family of opaque materials, including neutral shades • Bright colors such as B. VeroCyanV™, VeroMagentaV™ or VeroYellowV™ • Tango™ and Agilus30™ product families made of flexible material • Transparent VeroClear™, digital materials: Unlimited choice of composite material, e.g. B.: • More than 500,000 colors • Material to reproduce soft tissue in various Shore A hardness levels • Transparent shades • Composite materi ...

On behalf of a customer, we are selling a Stratasys F370 FDM 3D printer in good, well-maintained condition. Slight signs of wear on the housing (see photos). Last service carried out by Alphacam in 2024. Actual printing time approx. 6,000 hours., Stratasys F370 Accessories:, - 9 Build Trays, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: PLA, ABS, ASA, TPU92A, ABS-ESD7, PC-ABS, ABS-CF10, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing technology: FDM - Fused Deposition Modelling, number of nozzles: 2, Nozzle diameter: T14 (0.3556mm), Layer thickness: minimum 0.127mm, operating hours: ap ...

We are selling a Stratasys F170 on behalf of a customer. Stratasys last performed maintenance in May 2024, and since then, less than 20 hours of print time have been added. The machine is in excellent working order and comes with many accessories. Runtime under 1600 hours., Stratasys F170 accessories:, - 13 pieces of build trays, - 1 roll of ASA Blue in original packaging, - 1 PLA print head, - 1 pc. PLA Cooler, - 1 elastomer print head, - 1 x ABS print head (currently installed), - 1 x QSR print head (support material, installed), - 1 pc. wash-out station, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (download), GrabCAD Print Pro (available from manufacturer), Installation space (x,y,z): 254 x 254 x 254, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-M30, ASA, PLA, QSR Sup ...

Inv. Num. : 8433 Type: F190 CR Producer: Stratasys Generated: Parameters: Scope of delivery: PC with software Filament dryer Washing machine to remove the support material Filament vacuum cleaner Printheads and pads Number of filament spools

Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

Stratasys J750 DAP – Economic value through realistic anatomy simulation, The Stratasys J750 with Digital Anatomy Printer (DAP) Upgrade is not only a technological investment – it is a strategic tool for Cost reduction, process optimization and risk minimization in medical and medical-technical applications., ---------------------------------------------------------------, Your economic benefit, 1️⃣ Reduction of operation times, Patient-specific anatomical models enable more precise preoperative planning., → Shorter intervention times, → Lower operating costs, → Reduced complication risks, Already a few avoided operating minutes per procedure can significantly amortize the investment., ---------------------------------------------------------------, 2️⃣ Fewer revision and incorrect decisions, Reality-realistic tissue simulation allows testing  ...

This 3-axis Stratasys J55 Prime was manufactured in 2021. It features a build volume of up to 22,000 cm² and a maximum part size of 1,174 cm², allowing for versatile 3D printing capabilities. With a layer thickness of 18 microns, it produces high-quality smooth surfaces and supports over 640,000 color combinations. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys J55 Prime machine we have for sale. Contact us for further details.

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

There is a large item available to Zebra printer 140 and 170 width Versions Xi2-Xi4 Zebra's super-fast and durable 140Xi4 is easy to integrate and provides high reliability for action-critical applications. The 140Xi4 is super fast at 356 mm per second. This high performance and its steel sheet construction make it the ideal printer for high-throughput, high-throughput applications. The 140Xi4 is also well-used for applications where labels are needed quickly, either on demand or in larger quantities.

50 Zebra label printers Are sold here Thermal Transfer / Thermodirect as a package Printers originated from insolvency and were still in use until closure

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

Eos EOSINT Here we offer an Eos EOSINT plastic laser sintering system. The following things are included with the EOS P380 system Installation space containers Powder containers Overflow container Cooler: Termo TEK Termochiller Type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Sannung 3/N/PE/ 400V AC Frequency 50 Hz Current value 8 kW Fuse 32 A MAX Power Laser 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

● System : ANYCUBIC Photon Mono X ● Operation : 3.5 inch touch screen ● Build Volume: 192mm(L)*120mm(W)*245mm(H) ● Light-source: high-quality filament (wavelength 405nm) ● XY Res.: 0.050mm 3840*2400(4K) ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01-0.15mm ● Printing Speed: MAX 60mm/h ● Rated Power: 120W ● Material: 405nm UV Resin ● Software : ANYCUBIC Photon workshop ● Connectivity : USB ● Technology: LCD-based SLA ● Printer Size: 270mm(L)*290mm(W)*475mm(H) ● Net Weight: ~10.75kg

Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock