11 SUNNEN honing machines used machines

Tool, spare part, accessories

Hoehn machine - Cross grinding machine Sunnen ML 3500 (similar to ML5000) complete with external tank with paper filter and magnetic separator The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools Italy

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), SOLD - contact us for alternatives e.g. ML3500 o ML2000, complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Sunnen 1804 Honing machine, manual very good mech condition The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250

Honing machine, SUNNEN ML3500, (like ml5000 ml2000 ec3500 ml 5000 ml 2000), this machine is currently under complete electronic retrofit (Siemens), Touch screen. Loader interface possible

honing diameter: 165 mm stroke: 120 mm centre height: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____________________________________________________________ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Feature ...

Sunnen 1804 Honing machine, manual under power The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250

Key data: 19 mm

Please ask for more details!

workpiece diameter: 660 mm workpiece length: 8000 mm honing/re-bore length: 7600 mm internal diameter: 50,8 - 609,6 mm stroke length max.: 7600 mm spindle motor: 29,8 kW spindle turning speed range: 0 - 300 U/min Lifting capacity: 13,5 kW stroke speed: 0 - 30,5 m/min workpiece weight: 8000 kg control: Siemens Simatic total power requirement: - kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 18,7 x 1,5 x 1,5 m Universal horizontal. Honing Machine / Long Stroke Cross Grinding Machine with servo drive and electrical feed system - Siemens Simatic (Touch) - Coolant system with paper band filter - steady rest The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SUNNEN ML2000, Honing Diameter Range:, - Manual Stroking: 1.5 mm to 165 mm, - Power Stroking: 1.5 mm to 102 mm, Spindle Speed:, - Infinitely variable from 200 to 3,000 RPM, Stroke Rate:, - 60 to 350 strokes per minute, Automatic Sizing Range:, - 3 mm to 51 mm, Oil Tank Capacity:, - 106 liters, Pneumatic Requirements:, - 5.5 bar, Machine Dimensions:, - Length: 1,600 mm, - Width: 1,220 mm, - Height: 1,900 mm, Weight:, - Approximately 725 kg

honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.6 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.48 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible.

Maximale slag: 170 mm minimale slag: 6 mm Diameterbereik volgens handleiding: 1,5 gt; 165 mm Automatisch diameterbereik: 1,5 gt; 101 mm slagfrequentie (max.): 500 /min Slagfrequentie (min.): 60 /min Spindelsnelheid: 200 gt; 3000 tpm vermogen: 9,2 kW lengte: 1570 mm breedte: 1120 mm hoogte: 1810 mm gewicht: 750 kg

CONTROLS   electronic controls WORKING RANGE -HONING-   stroke max.: 170 mm   stroke min.: 6 mm   stroke rate (max.): 500 /min   stroke rate (min.): 60 /min WORKING RANGE -INTERNAL HONING-   Spindle speed    from: 200 /min   .. to: 3000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1600 mm   total height: 1900 mm   total weight approx.: 750 kg including partial equipment

honing diameter:51 mm stroke:300 mm spindle speeds::600 - 3000 U/min feed range:1500 - 5000 mm/min spindle drive:1,1 kW weight of the machine ca.:0,8 t total power requirement:4 kW dimensions of the machine ca.:1,1 x 1,9 x 1,5 m

honing diameter:51 mm stroke:300 mm spindle speeds::600 - 3000 U/min feed range:1500 - 5000 mm/min spindle drive:1,1 kW weight of the machine ca.:0,8 t total power requirement:4 kW dimensions of the machine ca.:1,1 x 1,9 x 1,5 m

circuit board, Sunnen ML3500 - ML5000 - ML2000, model PED 2202, in working condition, Contact us for info

Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg

honing diameter: 125 mm stroke: 600 mm throat: mm Control: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 7,5x5,2x4,4 m Unique honing machine built for inline motor blocks and v-blocks. Universal also for other parts because of the controlled movement of the table in y and the spindle in x. Movement x: 2000mm Movement y: +-150mm -2 step expansion SMA/HDA (mechanic/hydraulic) -In process air gauge Honing methods: -Normal honing -Short honing -Makro form Stop methods: -mechanical expansion: Step-automatic or air gauge automatic. -hydraulic expansion number of strokes, honing time or air gauge automatic. -Possibility of changing of spindle rotation direction after number of strokes while honing process. Machine like new with only 4.800 switch hours. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6549 Type: KS 1800-10 Producer: Gehring Generated: Parameters: Honing diameter: 10 mm Machining length: 1800 mm

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 54 mm stroke: 99999 mm centre height: 9999 mm Control: FANUC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Ball and spherical honing machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.