TESA hite used machines

Measuring range: 600 mm measuring system resolution capability: 0.001 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for self-adhesive Tesa adhesive tape, Carton adjustable in height and width, Space requirement:1250 x 800 x 1600 mm high Weight 180 kg from location warehouse

Description: 12 New Transformers Design : Cast resin transformer Design: Dry Make : TESAR Built: 2012 Condition: New Rated power: 1250 KVA Medium voltage: 20 KV +- 2 x 2.5% Low Voltage: 270 V Solar Transformers Vueuqq Switching group: DYN 5 Frequency: 50 Hz Cooling type :AN Total weight: 3450 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.

Micrometer, micrometer screw -Measuring range: 200 - 225 mm -without: test piece -Also other sizes: available -Weight: 1.4 kg

Manufacturer: Tesa SA Vermessungtisch, Type: Messfeld 560 X 750 X 410 MM<CRLF>, FREETEXT1: Rechner und Steuerung sind vorhanden, FREETEXT2: Anlage wird vor <CRLF>Verkauf auf Funtion geprüft,

Serviced and calibrated by Studenroth on 24.07.2024 Equipment/accessories: -Software -monitor and computer -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range X/Y/Z: 440mm/700mm/410mm, measuring uncertainty X/Y/Z: 2.5+3.9L/1000µm, probing deviation (MPEp): 3µm. Acceleration: 1730mm/s², traversing speed: 350mm/s, max. table load: 200kg, working temperature range: 19°C-21°C, operating temperature range: 13°C-35°C, air consumption: 21l/min, weight: approx. 400kg, control: Hexagon PC-DMIS. Documentation available. The coordinate measuring machine must be recalibrated.

Coordinate measuring machine Inv. Num. : 8632 Type: MICRO-MS 343 Producer: Tesa Created: 1997, GO 2020 Parameters: Machine dimensions: 800x750x1370 mm New Reflex system

Measuring machine Tesa Xcel 7107

Outside micrometers, micrometer screw, outside micrometer, outside micrometer -Manufacturer: TESA, outside micrometer -Measuring range: 0-25mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions case: 165/80/H35 mm -Weight: 0.4 kg

This 3-axis TESA Scan 52 optical measurement machine was manufactured in 2010. Ideal for precise and detailed measurement tasks, this machine represents a reliable choice for enhancing your quality control processes. Contact us for more information.

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: TESA, outside micrometer -Measuring range: 25-50 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 180/80/H30 mm -Weight: 0.4 kg

Optical measuring machine manufactured in 2009. This TESA visio 300 dcc features a measuring range of 300 mm in the X-axis, 200 mm in the Y-axis, and 200 mm in the Z-axis. It includes a high-resolution CCD camera and interchangeable zoom optics for enhanced measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA visio 300 dcc machine we have for sale. Contact us for further details.

Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

turning diameter: 400 mm turning length: 584 mm greates pass round over bed: 750 mm control: Siemens 828 D Shop Turn spindle passage: 81 mm spindle speed:: 3500 U/min spindle motor: 18,5/22 kW max. torque on the spindle: 410 Nm no. of tools in turret 1: 12 BMT 65 driven stations: 12 BMT 65 speed of driven tools: 5000 U/min drive milling spindle: MK 5 kW y-axis: +/- 60 mm rapid traverse: 30/30/10 m/min tail stock: MK 5 range L-W-H: 4,6 x 1,9 x 2,1 mm weight of the machine ca.: 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure The data for this ad was created wit ...

REF-2476 ULMA ETNA HITECH VERTICAL FORM-FILL-SEAL MACHINE Vertical form-fill-seal machine (VFFS) Manufacturer: ULMA Model: ETNA HITECH 280X Machine no.: 60281145 Year: 2009 Power: 7kW Voltage: 400V Overall dimensions: width 150 cm, length 220 cm, height 200 cm.

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle w ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...