TOS bu used machines

TOS BUC 63A/3000 Cylindrical Grinding Machine Grinding Diameter 630 mm Grinding Length 3000 mm Height of centers 315 mm Workpiece Weight 2500 Kg Max. Grinding wheel dimensions 750 x 100 x 305 mm Spindle Speed 840/970 rpm Workpiece Spindle Speed 8 - 315 rpm Grinding support stroke 90 / 280 mm Table Speed: Variable - from 0.01 to 3.6 m / min Grinding Head Swivel 90 Degree Table Swivel +/- 5 Degree Work Head Tilts from 90 taper - Morse 6 Spindle Drive 15 KW Machine Dimensions 10000 x 3400 x 2000 mm Machine Weight 13.7 Ton Machine weight approx. 12 t Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW

Inv. Num. : 9005 Type: BUC 63 A Producer: TOS Created: 1983 Parameters: Maximum grinding length: 2000 mm Grinding diameter: 630 mm Maximum weight of the workpiece: 2500 kg Maximum length of the workpiece: 3500 mm Machine weight: 5000 kg

BUC63A/3000 with NC Kavalir K51 Max. diameter 630 mm The distance between the centres is 3000 mm Max workpiece weight 2500 kg Total machine input 31 kVA Machine weight ca. 15 tons

grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical grinder BUB 32/1500

grinding diameter: 850 mm grinding length: 4000 mm centre height: 425 mm control: Siemens 8 max. workpiece weight between centres: 3000 kg workpiece weight in steadies max.: 4000 kg max. workpiece weight -without tailstock: 300 kg vertical Stroke: 0 - 90 °/deg. work piece spindle speed: 23 - 230 U/min workpiece-spindlehead motor: 5,3 kW grinding spindle head - swivable: +30 / -10 °/deg. dimensions of grinding wheel: 750 x 125 x 305 mm table feed: 0,01 - 4000 mm/min rapid traverse of table: 10 m/min table swivelabel +/-: +3 / -3 °/deg. grinding wheel speed: 25 - 50 m/sec grinding motor: 19 kW dimensions: 14,0 x 3,13 x 2,6 m total power requirement: kW weight of the machine ca.: 19,4 t dimensions of the machine ca.: m Universal external cylindrical grinding machine, modernised in 2011 * Siemens 828D control system * Internal grinding head, swivelling * MPM grinding wheel balancing machi ...

grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V Control: total power requirement: kW weight of the machine ca.: t Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS  ...

grinding diameter: 630 mm grinding length: 3000 mm : 2500 kg grinding wheel: grinding stand diameter x wid: 750x100x305 mm grinding head swivellable +/-: +30, -10 ° : 840,970 1/min : 1 mm : 3450 mm table speed -stepless-: 0.05-3.6 m/min table swivelabel +/-: +/- 5 ° Rotation speed of the work piece spindle area 1: 8 - 50 Rotation speed of the work piece spindle area 2: 50 - 315 1/min workpiece-spindle swiveling: 90 ° Motor of the grinding spindle head: 15 kW total power requirement: 31 kVA weight of the machine ca.: 15 t Equipment/Accessories: -4 flanges -Balancing stand -Various tips -Various spare parts -Paper belt filter -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS KURIM FNK 25A vertical milling machine was built was built in the Czech Republic by TOS KUŘIM – OS, a.s. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as precise drilling and milling of workpieces with a maximum weight of 200 kg. The machining process is performed by a reliable spindle, moving in three axes X,Y,Z with feed of 800 mm, 370 mm and 450 mm respectively. The spindle speed is adjustable from 56 to 4500 rpm, enabling precise adjustment of the parameters to the type of workpiece. The TOS KURIM FNK 25A also enables machining at various angles, thanks to its tiltable workhead. All this is complemented by a compact yet extremely rigid design that perfectly dampens any vibrations and ensures maximum process stability during even the most intensive challenges. All of this makes the TOS KURIM milling machine  ...

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machines power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information.

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information.

Boring machine manufactured in 2007. This TOS WH 10 CNC features a work spindle diameter of 100 mm and a maximum workpiece weight capacity of 3000 kg. The machine includes a programmable spindle speed range of 10-1800 min-1 and a robust clamping surface measuring 1000 x 1120 mm. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details.

Vertical turning machine manufactured in 2002. This TOS SK 16 features a maximum workpiece diameter of 1700 mm and a turning height of 1380 mm. It has a turntable clamping diameter of 1620 mm and can handle a maximum table load of 5000 kg. If you are looking to get high-quality turning capabilities, consider the TOS SK 16 machine we have for sale. Contact us for further details.

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855

Continuously variable speed gearbox, Variator VA31B101-72, Tos Znojmo, new Mechanical chain variator with stepless, electrical change of the ratio. - sufficiently large control range, - minimum maintenance requirements and - a simple operation Technical specifications: Drive speed: 950 rpm, Abtirebsdrehzahl: 448 to 2016 rpm Power: 2.85 to 5KW Torque: 60 to 24Nm Length: 660mm, width: 400mm, height: 580mm Weight: 145 kg State: The gearbox is brand new and was in stock as a spare part. Original packed

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.