TOX mag used machines

4 column press Tox MAg 008288A001 BJ 2016

Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total Stroke: 100 mm Power Stroke: 11 mm Machine Weight (without tool): 3420 kg Find more here - / Contact us at -

TOX Power powerhouse in good condition Type K 4.200.20

Pneumatic cylinder Manufacturer: TOX Type: K08. 81.200.12 Force 70 kN at 6 bar air pressure Total stroke: 200 mm, of which power stroke 12 mm max. with total stroke adjustment via hand-adjustable stop screw to the exact x-mass adjustment All information without guarantee

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

TOX pressotechnik CBM 004.025.001.a.007 Find more here - / Contact us at -

Pneumohydraulic cylinder TOX PressotechnikHydro-pneumatic press, power packType: S 04.00.050.12 DFabr. Item No.: 208696.460 Year of construction approx. 2000Printing capacity: 4.0 ton. at 10 barPressure capacity: 3.0 ton. at 8 barPressure capacity: 2.6 ton. at 7 barPressure capacity: 2.4 ton. at 6 barPressure capacity: 2.0 ton. at 5 barPressure capacity: 1.6 ton. at 4 barPressure capacity: 1.2 ton. at 3 barTotal stroke: 50 mmPower stroke: 12 mmPiston rod: 30 mmThread mount piston rod: M22 x 2 mmCompressed air requirement: 3 to 10 bar- electronic

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

Max. pressing force: 25 kN Convertible to: 16 kN Max. working stroke: 25.3/60 mm Table size: 150 x 200 mm Diarrhea hole in the table: 15 mm Stroke adjustment: 290 mm Space requirement: 800 x 580 x 650 mm Weight: 51 kg

Drive: TOX power package S 04.00.300.44D, pneumatic connection: G 3/8 inch, compressed air preparation: filtered and dried compressed air, max. particle size: 40µm, control: STE 336-306-1/2, max. press force at 10bar air pressure: 40kN, air pressure: 3 to 10bar, total stroke: 300mm, force stroke: 40mm, ambient temperature: 10 to 60°C, length: 1753mm, width: 1100mm, weight of the yoke: approx. 1290kg, with documentation. The machine has been shut down for years, but is in good condition, an inspection on site is possible.

Offer 25419 Technical data: - Printing capacity approx. 80 kN - Working stroke approx. 50 mm - Power stroke 24 mm - Projection approx. 150 mm - Table size 300 x 200 mm - Table top thickness 45 mm - Installation height adjustment up to max. 300 mm - 2 Hand control - Air inlet 6 - 8 bar - Total - space requirement approx. W 800 x H 2000 x D 900 mm - Weight approx. 400 kg

Offer 25418 Technical data: - Printing capacity approx. 110 kN - Working stroke approx. 50 mm - Power stroke 12 mm - Projection approx. 150 mm - Table size 280 x 180 mm - Installation height adjustment up to max. 300 mm - 2 Hand control - Air inlet 6 - 8 bar - Total - space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

This high-efficiency magnetizer was designed for complex applications where high fields and/or large amounts of material have to be magnetized. Achieve the exact pulse with a wide range of configurations from low to high voltage and low to high capacitance. The magnetizer also features several discharging output configurations for maximum flexibility. Find more here - / Contact us at -

length: . mm width: . mm boxes: 2 Stück total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 boxes of magnetic prisms The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm width: . mm boxes: 4 Stück total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 4 boxes of magnetic prisms The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm width: . mm boxes: 3 Stück total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3 boxes of magnetic prisms The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive: 2.9 kW -Shaft: Ø 32 mm -Speedometer -External cooling -Number: 2x motors available -Price: per piece -Weight: 70 kg/piece

Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive: 2.9 kW -Shaft: Ø 32 mm -Speedometer -External cooling -Number: 2x motors available -Price: per piece -Weight: 70 kg/piece

Different varieties and brands of vibrators, vibrator motor vibrator. UHDE - S and SM type. AEG, Friedrich, Vimarc, Jost, mogensen, Schenck, casadio, FIEGE & jost, bosch, etc. Magnetic vibrator. AEG Joest, Jost UHDE, etc Overhauled, overhauled and new