TSCHUDIN htg used machines

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

* General * SKUR0867 * LocationBarneveld * MakeP.Spiess-Tschudin AG (CH) * Main Features * MaterialStainless steel * Motor5 KW * Surface2.5 m2 * Specified Features - Nutsche filter * Filter surface2.5 m2 * Vessel sizesdia. 1750x400mm * Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) * With stirrercheck * Motor5,0 kW, 380 Volt (Ex) * Stirrer can be liftedcheck * MaterialCeramic, Stainless steel * With jacketcheck * General * TypeFZS 80 F16 * Mach.No.unknow, manufacturer plate is missing * Year of construction1967 * Mounted on legscheck * Floorspace2,1x 2,0 M * Total height4,0 M * Weight2600 Kg * ATEX designedcheck * Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts  ...

* General * SKUR0867 * LocationBarneveld * MakeP.Spiess-Tschudin AG (CH) * Main Features * MaterialStainless steel * Motor5 KW * Surface2.5 m2 * Specified Features - Nutsche filter * Filter surface2.5 m2 * Vessel sizesdia. 1750x400mm * Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) * With stirrercheck * Motor5,0 kW, 380 Volt (Ex) * Stirrer can be liftedcheck * MaterialCeramic, Stainless steel * With jacketcheck * General * TypeFZS 80 F16 * Mach.No.unknow, manufacturer plate is missing * Year of construction1967 * Mounted on legscheck * Floorspace2,1x 2,0 M * Total height4,0 M * Weight2600 Kg * ATEX designedcheck * Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts  ...

* General * SKUR0867 * LocationBarneveld * MakeP.Spiess-Tschudin AG (CH) * Main Features * MaterialStainless steel * Motor5 KW * Surface2.5 m2 * Specified Features - Nutsche filter * Filter surface2.5 m2 * Vessel sizesdia. 1750x400mm * Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) * With stirrercheck * Motor5,0 kW, 380 Volt (Ex) * Stirrer can be liftedcheck * MaterialCeramic, Stainless steel * With jacketcheck * General * TypeFZS 80 F16 * Mach.No.unknow, manufacturer plate is missing * Year of construction1967 * Mounted on legscheck * Floorspace2,1x 2,0 M * Total height4,0 M * Weight2600 Kg * ATEX designedcheck * Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts  ...

* General * SKUR0867 * LocationBarneveld * MakeP.Spiess-Tschudin AG (CH) * Main Features * MaterialStainless steel * Motor5 KW * Surface2.5 m2 * Specified Features - Nutsche filter * Filter surface2.5 m2 * Vessel sizesdia. 1750x400mm * Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) * With stirrercheck * Motor5,0 kW, 380 Volt (Ex) * Stirrer can be liftedcheck * MaterialCeramic, Stainless steel * With jacketcheck * General * TypeFZS 80 F16 * Mach.No.unknow, manufacturer plate is missing * Year of construction1967 * Mounted on legscheck * Floorspace2,1x 2,0 M * Total height4,0 M * Weight2600 Kg * ATEX designedcheck * Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts  ...

* General * SKUR0867 * LocationBarneveld * MakeP.Spiess-Tschudin AG (CH) * Main Features * MaterialStainless steel * Motor5 KW * Surface2.5 m2 * Specified Features - Nutsche filter * Filter surface2.5 m2 * Vessel sizesdia. 1750x400mm * Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) * With stirrercheck * Motor5,0 kW, 380 Volt (Ex) * Stirrer can be liftedcheck * MaterialCeramic, Stainless steel * With jacketcheck * General * TypeFZS 80 F16 * Mach.No.unknow, manufacturer plate is missing * Year of construction1967 * Mounted on legscheck * Floorspace2,1x 2,0 M * Total height4,0 M * Weight2600 Kg * ATEX designedcheck * Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts  ...

Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

<br>DECOIL DURCHMESSER: 1000 MM, AUFWICKLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .