8 TSCHUDIN round grinding machines used machines

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

* General * SKUR0867 * LocationBarneveld * MakeP.Spiess-Tschudin AG (CH) * Main Features * MaterialStainless steel * Motor5 KW * Surface2.5 m2 * Specified Features - Nutsche filter * Filter surface2.5 m2 * Vessel sizesdia. 1750x400mm * Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) * With stirrercheck * Motor5,0 kW, 380 Volt (Ex) * Stirrer can be liftedcheck * MaterialCeramic, Stainless steel * With jacketcheck * General * TypeFZS 80 F16 * Mach.No.unknow, manufacturer plate is missing * Year of construction1967 * Mounted on legscheck * Floorspace2,1x 2,0 M * Total height4,0 M * Weight2600 Kg * ATEX designedcheck * Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsNutsche fi ...

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.