baader filleting machine meat and fish processing machines used for sale

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

Used Baader fish fillet machine type 483. Year of manufacture 1993.

see picutre for hours Find more here - / Contact us at -

Totally overhauled Baader 189 Filleting machine for cod and whitefish This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

Baader 142 gutting machine Condition: Overhauled The Baader 142 gutting machine is specifically designed for gutting salmon, sea trout, and coho within a weight range of 2 – 7 kg, whether with the head on or head off. The fish to be processed is manually loaded onto the machine. With the assistance of a powerful tail clip, the fish is gently transported. The machine utilizes electronic measurements and calculations to determine the precise position for making cuts on the fish. It excels at performing accurate mechanical princess cuts. The integrated suction devices and throat cutting tools effectively collect and remove the guts. The throat is separated from the inside of the head while ensuring that the gills remain intact on the fish. We provide all necessary units for operating the Baader 142, including the vacuum pump, cyclone, and inspection belts. Capacity: Able to pr ...

Baader 581 Filleting Machine for Salmon Baader 581 Salmon Filleting Machine stands as a pinnacle of innovation in the world of fish processing. Meticulously designed for optimal performance and precision, this machine caters to the filleting needs of salmon and large fish. Acknowledging the influence of various factors on fish quality, the Baader 581 adapts seamlessly to deliver exceptional results. Condition – Machine delivers fully overhauled, serviced and ready to run. Technical Specifications: Noise Management: Adhering to DIN EN ISO 11201 standards for noise measurement. Fish Species/Size Range: Salmon: 2 – 7 kg (gutted, head on) Salmon Trout: 1.8 – 5 kg (gutted, head on) Processing State: Headed and gutted. Machine Performance: Filleting Speed: Impressive 16 fish/min (potential for higher speeds with skilled operators).

Baader 200 Fish Filleting Machine is overhauled, specifically designed for producing fillets of salmon, trout, and similar fish species. It is well known for its high processing capacity, precision, and reliability. This machine is used in fish processing plants around the world to automate the filleting process, improving efficiency and reducing labor costs. Manufactured by Baader, a well-known German company specializing in fish processing equipment. It efficiently processes both gutted and headed fish, with the option to include or exclude the collar bone. The Fish Filleting Machine ensures that the fish is fed through the tools in a manner that minimizes stress, and guaranteeing a smooth surface on the fillets. In the case of salmon, the machine can produce fillets with or without the collar bone, and with suitable adjustments, it can also process salmon sides while retain ...

Baader 187 Fish Filleting Machine Condition: Refurbished Baader 187 Fish Filleting Machine is overhauled filleting machine presented here is specifically designed for processing small whitefish within a size range of 30 to 55 cm (12″ – 22″). This compact and efficient filleting system offers a streamlined solution for handling these smaller fish. The machine’s speed is adjustable, allowing for a range of 25 to 40 fish per minute, which can be customized to match the operator’s skill level. The production capacity of fillets per hour depends on the average fish size. Lower image demonstrates the exceptional cutting results achieved by the BAADER 187, producing clean fillets with intact belly flaps and minimal wastage. Technical Specifications: Working Range: Small whitefish from 30 to 55 cm Capacity: 25-40 fish per minute Power Consumption: 1.5 kW Water Consump ...

Baader 184 is fish filleting machine for processing whitefish. Condition: Refurbished This extensively overhauled machine is specially designed for filleting gutted and headed cod, saithe, and haddock within a size range of 30 to 70 cm in total length (equivalent to 0.3 – 2.5 kg, head and gutted weight). Depending on the fish type, it can also handle fish smaller than 70 cm. Baader 184 incorporates the renowned Baader filleting system, known for its high yield and operational reliability. Additionally, it features an integrated skinning unit for added convenience. Key Specifications: Capacity: 24-40 fish per minute Power Consumption: 10 kW Water Consumption: 25 liters per minute Dimensions: 6.15 x 1.70 x 1.50 meters Weight (Net/Gross): 2550/2850 kg

Baader 185 Fish Filleting Machine is a robust and overhauled machine designed for efficient filleting and skinning of various whitefish species. These are large and medium-sized cod, haddock, saithe, and merluza, among others. Condition: Refurbished Similar to the Baader 184, the Baader 185 features larger guidance assemblies and tools, enabling processing of a wider range of fish sizes. The machine’s working range accommodates fish with total lengths ranging from approximately: 50 to 100 cm (equivalent to 1 – 8.5 kg) for cod 50 to 90 cm (1 – 6 kg) for saithe 50 to 80 cm (1 – 4.5 kg) for haddock Additionally, it can handle de-headed fish: cod measuring 40 to 80 cm (0.8 – 6.5 kg) saithe measuring 40 to 75 cm (0.8 – 5.0 kg) haddock measuring 40 to 65 cm (0.8 – 3.5 kg) Equipped with an integrated skinning unit, the Baader 185 Fish Filleting Machine e ...

Baader 188 Fish Filleting Machine Manufacturing Year: 1980 Condition: Refurbished Baader 188 is filleting machine is specifically designed for processing whitefish, and it has undergone a thorough overhaul to ensure optimal performance. It is capable of handling whitefish within a working range of 35 to 70 cm in length, which corresponds to a weight range of approximately 0.4 to 2.5 kg. With a capacity to process 27 fish per minute, Baader 188 Fish Filleting Machine offers efficient and consistent filleting operations. It has a power consumption of 2.2 kW, making it energy-efficient. In terms of water usage, Baader 188 Fish Filleting Machine requires a consumption rate of 20-25 liters per minute, contributing to efficient operation. It has compact dimensions, measuring 3.80 x 0.95 x 1.60 meters, and a net weight of 930 kg. Technical Specifications of Baader 188: Work ...

Condition: Excellent, fully renovated Baader 417 Fish Heading Machine is specifically designed for heading various species of whitefish, including cod, pollack, haddock, and whiting. It can also be utilized for processing perch and similar fish species. Size range: Suitable for fish with an overall length ranging from 30 cm to 70 cm. Baader 417 can handle up to 40 fish per minute. Water consumption: Approximately 5 liters per minute. Power consumption: 1.87 kW. Electricity: 400 V / 50 Hz. Equipped with a plastic elevating belt featuring dividers. Belt width: 150 mm. Height dividers: 80 mm. Elevating height: 1450 mm. Dimensions (Length x Width x Height): 2160 mm x 885 mm x 1860 mm

Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...

Totally overhauled Baader 695 Bone Separator is designed to provide a gentle separation of raw meat material from waste components such as bones and skin. The machine utilizes a flexible squeezing belt to transport the product to a perforated drum. The belt gently squeezes the softer particles like meat and fat through the holes, while the harder particles such as bones, sinews, and cartilage remain outside of the drum. Capacity: Can process up to 1800 kg per hour. The throughput may vary depending on factors such as drum hole size, product type, pre-treatment, and choiceed pressure. The Baader 695 is a user-friendly machine that is easy and quick to clean. It is built in accordance with globally recognized sanitary standards. The pressure system ensures gentle product processing and reduces machine wear. Additionally, the machine is equipped with castors for easy handling.

Baader 694 Bone Separator Condition: Perfect, after complete overhaul Baader 694 Bone Separator is designed to provide a gentle separation of raw meat material from waste components such as bones and skin. The machine utilizes a flexible squeezing belt to transport the product to a perforated drum. The belt gently squeezes the softer particles like meat and fat through the holes, while the harder particles such as bones, sinews, and cartilage remain outside of the drum. Capacity: Can process up to 400 kg per hour. The throughput may vary depending on factors such as drum hole size, product type, pre-treatment, and choiceed pressure. The Baader 694 is a user-friendly machine that is easy and quick to clean. It is built in accordance with globally recognized sanitary standards. The pressure system ensures gentle product processing and reduces machine wear. Additionally, t ...

SEPARATOR BAADER 696 Technical description: Drum diameter 200mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm).

SEPARATOR BAADER, TYPE: 694 Technical description: Power supply: 230-400V /50Hz / 1,5Kw Bandwidth: 200 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1140 x 950 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

SEPARATOR BAADER, TYPE: 699 WITH FEED ELEVTOR AND OUTLET CONVEYOR Technical description: - Separator hopper with breaker and helicoid Dimensions: 2100 x 1050 x 1400 mm - Elevator for bins up to 200 liters Lift height: 2500 mm Dimensions: 900 x 750 x 3500 mm - Separator Baader, type: 699 Serial number: 12-7157-699 Year: 1989 Power supply: 380 V, 50 Hz, 15.0 A, 8.0 kW Drum holes: ? 2 mm Dimensions: 1500 x 1450 x 1550 mm - Outlet conveyor with plastic band Bandwidth: 200 mm Lift height: 900 mm Dimensions: 1500 x 400 x 950 mm This machine uses the same principle as the BAADER 694 and 697 but with much higher throughput. It is a further development of the BAADER 695. The speed is infinitely variable up to twice the normal speed. The belt pressure is controlled by a hydraulic system. Pressure and speed indicators allow correct adjustment of the machine to different raw material. T ...

SEPARATOR BAADER, TYPE 694 Technical description: Power supply: 380-440 V/50-60 Hz Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1100 x 1000 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

SEPARATOR BAADER, TYPE: 696 Technical description: Machine number: 12 6533 0696 Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Power supply: 380 V, 3 Ph, 50 Hz, 3.7 A, 1.5 kW Dimensions: 1050 x 1000 x 1340 mm

Height=1.65 m, Overall length= 1.4 m, Overall width= 1.1 m, Net weight= 270 kg,

Height=1.55 m, Overall length= 1.15 m, Overall width= 1.3 m, Net weight= 680 kg,

Height=3.25 m, Overall length= 1.68 m, Overall width= 3.7 m, Net weight= 2400 kg,

Cutter Manufacturer: Baader Stainless steel Capacity: 60 liters 6 knives

BAADER SKINNING MACHINE FOR FISH, TYPE 47. ID 2279 Technical description: Machine number: 10-2211-0047 Working width: 205mm Belt width: 195mm Total dimensions: 2200mm x 900mm x 1200mm

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.

Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.

Baader soft separator Type 696 With load With dosing bunker

A Baader Lino poultry buffer system is available.

Height=1.26 m, Overall length= 0.55 m, Overall width= 0.75 m, Net weight= 230 kg,

A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible.

Offered is an abdominal opener for poultry processing. Manufacturer: LINCO Food Systems (formerly Lindholst & Co A/S, now BAADER) / Tielemann Food Equipment BV, type 12 CW / 8 inch. Compatible bird sizes (live weight): standard broilers: 1.5-2.5kg, large broilers: 2.5-4.0kg, laying hens: 1.0-4.5kg, throughput: 6300 birds per hour (BPH), noise emission: below 80dB(A) at the workplace, machine dimensions (W/D/SM): 1380mm/1350mm/776mm, machine weight: approx. 550kg. Suitable for integration into industrial poultry slaughter and evisceration lines. Inspection possible by arrangement.

Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Working hours: 1465 hours With hopper and tamping device

Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

Koppens breading machine Belt width: 600mm Power: 0.12 kW

Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

Sieving machine

BERR filler SMB/Leibinger 18/6 with 18 filling valves and 6 head crown corker running direction: right-to-left year of manufacturing: 1989 with long filling valves/tubes with safety housing incl. CIP TULPS

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm

For sale is a semi-automatic cup filling system for drinking yoghurt, ayran or similar. Key data on the plant: - Semi-automatic, i.e. the cup must be inserted and the button pressed for each filling. - Lid diameter: 75 mm - Capacity: Up to 300 ml - Power consumption: 1 kW (230 V plug) - Pneumatic: Compressor required. If you are interested, our compressor can also be purchased. (Please inquire separately!) - Pipe connection DN 32 (direct connection to tank possible, so that the liquid can be sucked off the system with a slope - Country of manufacture: Turkey - Thermal sealing: temperature adjustable. Aluminum lids (75 mm) were used with this system. - Magazine for sealing board available. These are placed on the cup by the system itself - Filling capacity: Variable depending on the filling quantity: 250 ml were filled with this system. Here, about 600 cups/hour were possible.  ...

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Completely safe in operations. Protected against penetration of water splashes. The motor can be used for a long time. It can be connected to grounded or ungrounded voltage. Protective cover made of several layers of steel and plastic. Waterproof. Dimensions: 250 x 210 x 350 mm. Motor: 0.18 Kw Weight: 10 kg.

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V ? 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm

GRADING - WEIGHINF MACHINE MAREL, TYPE: A320 Technical description: Number of stations: 8 Feeding conveyor: 4300 x 1005 x 1970 mm, working width: 450 mm Weighing conveyor: 1900 x 750 x 1640 mm, working width: 300 mm Grading conveyor: 6200 x 1500 x 1550 mm, working width: 385 mm

SEPARATOR, SEPAMATIC, TYPE: SEPA 410 Technical description: Machine number: 107 306 Drum diameter: 90 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Power supply: 400 V, 50 Hz, 6 A, 2,2 kW Capacity: up to 800 kg per hour Dimensions: 1500 x 1200 x 2850 mm Includes pallet with additional drum with holes: 3 mm, and spare parts.

4 WAYS PINE-BONE REMOVER, WMT Technical description: Material: Stainless steel Aisi-304 Power supply: 380/440 V - 50/60Hz Mesh width: (x4) 245 mm Working width: (x4) 210 mm Dimensions: 2050 x 1650 x 1650 mm

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Voltage: 3 x 400 V + N + PE, 50 Hz, 16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

Fish Skinning Machine Make: Steen Model: ST600 Built 2008 Regularly serviced and well maintained

Deglazing Machine Electrically heated 1000mm belt width Make: Sharp Built 2019

FILLETING MACHINE FOR MACKEREL, VMK Technical description: Belt width:70 mm Power supply: 220/380 V, 50/60 Hz Total dimensions: 2360 x 800 x 1680 mm

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

Height=1.06 m, Overall length= 0.9 m, Overall width= 0.71 m, Net weight= 75 kg,

Height=1.46 m, Overall length= 0.51 m, Overall width= 0.53 m, Net weight= 208 kg,