elumatec saws used for sale

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Lenght 6 m E355 positioner controller Saw diameter 420 mm

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg

Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200

Key data: 380 mm

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

Key data: 7300 mm, 1000 mm, 650 mm

- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

Manufacturer: Elumatec Type: SLK118/00 Year of Manufacture: September 2008 Type of Machine: CNC Profile Milling Machine (Template-Free Copy Milling Machine) Find more here - / Contact us at -

Automatic feed via E555 control with Windows operating system For mounting on any Elumatec single-head saw (right) Max. feed length: 6,000 mm

Elumatec circular saw

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with new computer in 2023 Speed infinitely variable up to 24,000 rpm Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material tensioners Spindle in very good condition, spindle pull-in force: 12.5 kN Protective fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

3-axis machining centre with automatic 8-fold tool changer for aluminium or PVC profiles Max. travel X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Control system E 500 Speed infinitely variable up to 6,000 rpm Hand-held control unit Minimum quantity spraying Double-sided angle head and a high-speed spindle Tensioner detection 8 pneumatic material tensioners Light barrier

Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min

A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Manufacturer: Elumatec Model: SBZ 122/31 Year of Manufacture: 2007 Type of Machine : Bar Processing Center Processing Length: 3750 mm with bar support / 3500 mm without Axis Travel: X = 350 mm, Y = 280 mm, Z = 300 mm Speed: 30 m/min positioning speed (all axes) Accuracy: ±0.1 mm Spindle: 6 kW, 21,000 rpm, HSK F63 Tool Stations: 5 Max. Tool Diameter: 200 mm (manual), 92 mm (automatic) Max. Saw Blade Diameter: 500 mm Air Consumption: ~50 l per cycle Compressed Air Requirement: >7 bar Power Supply: 400 V, 3-phase Find more here - / Contact us at -

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 3,100 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 Operating System Minimum Quantity Spraying Tensioner detection and automatic displacement 6 pneumatic material clamps 2 material stops Loading is included in the price

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Pendulum operation through two light barrier areas Manual control panel Loading is included in the price Weight: approx. 8,500 kg

3-axis machining centre with automatic tool changer for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed infinitely variable up to 21,000 rpm Manual control unit Minimum quantity spraying Automatic tool change with magazine (4 places plus angle head) Tensioner detection and clamp displacement 4 pneumatic material clamps light barrier Weight: approx. 2,000 kg

Max. profile width at 180°: 220 mm Max. profile height: 210 mm Angle adjustment range: 30°-180° Welding level: 340 x 300 mm

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

Key data: 3850 mm, 350 mm, 280 mm

3-axis machining centre with automatic tool change for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB ports Speed infinitely variable up to 22,000 rpm Boc Hqjyqyaqoa R H Towi Hand-held control unit Minimum quantity spraying Tool changer with 2 magazines (a total of 10 places plus angle head) Tensioner detection and clamp displacement 2 light barrier areas and 2 material stops, thus pendulum operation possible A total of 8 material tensioners Spindle in good condition, spindle pull-in force: 12 kN Weight: approx. 2,000 kg

This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details.

This 3-axis Elumatec SBZ 130 was manufactured in 2007. It features a maximum machining length of approximately 4200 mm and a robust Y-axis travel of 400 mm. The high-speed milling spindle operates at a maximum speed of 6000 rpm, supported by an 8-position turret head tool changer. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 130 CNC profile machining centre we have for sale. Contact us for further details.

Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile

A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg

Circular Metal Saw manufactured in 2009. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (right) Max. feed length: 4,500 mm Pneumatic parking brake

Manual length adjustment via hand slider For mounting on any Elumatec single-head saw (right) Max. feed length: 3,000 mm

This 3-axis Elumatec DG 244 was manufactured in 2020. It features a cutting length of 6.0 m and a maximum saw blade diameter of 550 mm, providing efficient cutting capabilities. The machine includes a complete extraction unit and a mobile workpiece support for enhanced functionality. If you are looking to get high-quality circular metal cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

This 4-axis Elumatec SBZ 122/73 was manufactured in 2021. It features a powerful 17.5 kW capacity and a maximum spindle speed of 20,000 1/min, making it suitable for high-performance machining. The machine includes a collision-optimized clamping system and a specialized tooling set for aluminum. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ 122/73 machine we have for sale. Contact us for further details.

Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device

Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement.

Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, ...

This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details.

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

• Manual operation • Good properties for profile cuts • Adjustment of the cutting angle via backlash-free tapered bearings • Quick clamping device • Precise belt guide, with ball bearings and carbide inserts • Electric coolant pump Specifications • Stop: 2000 mm • Power: 400V 2.7 A • Engine: 0.8 – 1.5 HP • Cutting speed: 40 – 80 m/min. • Vise opening: 315 mm • Jaw height: 110 mm • Jaw length: 180 mm • Working height: 1080 mm • Mitre cut: 60° right • Dimensions (LxWxH): 870 x 1250 x 1900 mm • Weight: 270 kg

Saegebaender Roentgen, new

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

saw blade diameter: 450 mm cutting diameter: 150 mm stroke: 1300 mm Control: cutting range: 140x140 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

: 15-150 m/min capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 60 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW dimensions: 1300 x 2050 x 1400 mm weight: 910 kg Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high  ...

capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 280 mm

Ref.nr 00898 Name of the system: Used band saw Manufacturer: Bauer HS 280 GZA: For automatic sawing of small diameter ranges, universal application by the miter device, hydraulic material feed. Model HS 280 GZA Year of construction 2012 Technical data: (according to data sheet) Automatic saw design Cutting range 90° Round Diameter 280mm 90° Flat 300 x 230mm 45° Flat 220x230mm 30° Flat 130x170mm Cutting angle 0-30° Saw motor 1,100/1,400 Saw Blade 3000x27x0.9mm Belt speed 1: min 30m/min 2: max. 60m/min Coolant Pump 90W Hydraulic Pump 370W Mains connection 400V / 50-60 Hz Clamping force adjustment infinitely variable 10-40 bar Stroke length 500mm Working height / infeed height 500mm Dimensions (L x W x H) 1700 x 2100 x 1400mm Weight 1100 kg Scope of delivery / standard equipment Completely ready for connection, machine stand with chip collectio ...

capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 330 mm : 450x320 saw band length: 4250x34x1,1 mm band speed: 40 + 80 m/min table height: 845 mm saw band width: 34 mm total power requirement: 2,2 kW weight of the machine ca.: 0,985 t dimensions of the machine ca.: 1,4 x 2,0 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

PILOUS ARG-300F metal band saw was built in 2024 in the Czech Republic by PILOUS-pásové pily, spol. s r.o. The machine is in perfect technical condition, practically unused – only a few test cuts were performed on it. The PILOUS ARG-300F is an extremely versatile machine designed for both industrial plants and professional workshops. It is ideal for precise cutting of workpieces made of, among others, stainless steel and tool steel at an angle of 90°, +45° and +60°. Cutting is performed by means of a reliable saw blade, driven by a powerful electric motor with worm gearbox. The cutting speed is adjustable in a range from 15 to 90 m/min with the use of an inverter. Stable clamping of the workpiece, on the other hand, is ensured by a massive quick-clamping vise. The machine’s design is based on a robust arm made of high-quality grey cast iron. This solution guarantees high r ...

MEP Shark 282 CCS Band Saw 3-speed 400V, 2-stage motor, runs smoothly. Infinitely variable speed from 0 to 72 RPM. Miter cuts possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum cutting capacity round: 250 mm Maximum cutting capacity square: 220 mm Maximum clamping opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125 x 70 x 190 cm Infeed conveyor dimensions: 200 x 53 x 90 cm Includes accessories as shown in the pictures.