rühle meat and fish processing machines used for sale

Height=1.33 m, Overall length= 1.3 m, Overall width= 1.555 m, Net weight= 820 kg,

Height=1.34 m, Overall length= 0.9 m, Overall width= 0.7 m, Net weight= 628 kg,

Height=2.022 m, Overall length= 0.75 m, Overall width= 1.6 m, Net weight= 750 kg,

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

Height=1.59 m, Overall length= 1.21 m, Overall width= 0.95 m, Net weight= 662 kg,

Rühle Frozen Meat Cutter Type: GFR 450/250 CW 5.5 Cross cutter 4 pieces

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

with mixing and Meng arm cooling vacuum

Rühle SR3 cube and strip cutter (built in 2013), The Rühle SR3 is a fully automatic high-performance cube and strip cutter for industrial use in food processing. The machine stands out with precise cut quality, high throughput, and maximum flexibility for a wide range of products., Whether meat, bacon, cheese, fruit or vegetables – the SR3 processes almost all common raw materials reliably and evenly into cubes, strips or slices., Due to automatic loading, modern control technology, and quick-change system for cutting gates, the machine is ideal for use in production lines with high requirements for efficiency and product quality., Highlights, - Fully automatic high-performance machine, - Universally usable (meat, cheese, vegetables, fruit), - Precise cut images with minimal fracture proportion, - Quick-change system for cutting fences, - Touch control for simple operation, - Mobile  ...

Rühle PR 25, 25 needles, stainless steel conveyor belt, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Rühle PR 15 pickling injector, 15 needles, with stainless steel conveyor belt, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Ruhle Tumbler MKR 130, with vacuum, scraping arm, container size 130 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Ruhle Dicer SR 2 Turbo, loading device for euro boxes, discharge-conveyor belt, touch PC control,different grid sets, cutting temperature: from -5°C to +80°C, capacity: max. 3000 kg/h. The machine is currently in the refurbishment and will be available soon. You are welcome to test it in Koblenz, Germany.

Rühle Tumbler MKR 600, Rühle high-tech polishing machine with vacuum, mixing arm, container size 600 liters, touch PC control, mixing and kneading, stepless arm drive allows up to 25 revolutions per minute, direct cooling by powerful cooling unit, Bayonet arm closure, integrated loading for 200 litres of standard trolley. The machine is available at short notice and can be tested in Koblenz, Rhineland-Palatinate.

A Rühle vacuum cooling mixer for the food industry is available. Container volume: 400l, max. filling capacity: 300l, mixing arm speed: 25rpm, lifting aid load capacity: 400kg. Machine dimensions X/Y/Z: approx. 1900mm/2150mm/1650mm, weight: approx. 1500kg. Including an integrated feed and lifting system. Documentation available. An on-site inspection is possible.

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Rühle Tumbler MGR 400, with vacuum, container size 400 liters, filling max. 300 liters, intelligent touch PC control, direct cooling by powerful cooling unit, infinitely variable arm drive allows up to 25 revolutions per minute, feeding for loading and unloading

RUHLE / RÜHLE MKR 600 Vacuum Cooling Tumbler Year 2008 Touch-PC control Automated lid Tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Feed system Quick arm fastening Scraper, pressure assembling Variable speed from 0-25 RPM Vacuum system from 0-90% 600 liters tumbler

RUHLE / RÜHLE MPR 150 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 150 liters tumbler capacity

RUHLE / RÜHLE MPR 220 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 220 liters tumbler capacity

It is a high-capacity semi-automatic machine capable of producing up to 320 slices per minute and dicing up to 3,000 kg of meat or bacon per hour, with a temperature range of minus 5°C to + 80°C. It can be used for a wide range of applications, from slicing bone-in meat with a special knife to dicing a variety of boneless materials. The slicing quality is excellent, without splinters. Multiplex system grid design, easy to clean and replace. The thickness of the slicing function is adjustable from 0.5 to 32 mm. The device ensures an optimal cutting blade. The working area of the unit allows the preparation of 3 plastic crates of raw material (approx. 150 kg). This worktable ensures comfortable working conditions. The machine is equipped with a semi-automatic lifting device. This means that at the touch of a button, the next plastic crate is lifted to the height of the wor ...

The machine is delivered in a mobile version, mounted on 4 wheels, which can be fixed in place. Technical data Cutting capacity: max. 900 kg/h Power input: 1,5 kW Max. length of material to be cut: 350 mm Cuttable cross section: 100 x 100 mm Adjustable cutting thickness: 1 - 32 mm Cross cutting dimensions: 6, 12, 24, 50 mm Slices per minute: 80 Weight: 280 kg Dimensions HxWxD: 900x600x980 mm

Height=1.11 m, Overall length= 0.71 m, Overall width= 1.05 m, Net weight= 280 kg,

Height=1.11 m, Overall length= 0.71 m, Overall width= 1.05 m, Net weight= 280 kg,

Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 521 kg,

A scarcely used Rühle cooling vacuum tumbler with mixing, marinating and tumbling function is available. Container volume: 400l, max. filling volume: 300l, refrigerant: R404A, refrigerant quantity: 760g, mixer arm speed: 25rpm, polter arm speed: 25rpm, lifting aid load capacity: 300kg. Machine dimensions X/Y/Z: approx. 2100mm/2650mm/2700mm, weight: approx. 1400kg, operating hours: 7540h, mixing hours: 553h. Documentation available. An on-site inspection is possible.

Vacuum cooling tumbler for meat and fish. With self-tipping mixing tank and loading/lifting arm. Manufacturer: RÜHLE Model: MGR 400 Serial no.: 0075 Year: 2012 Power supply: 400 V/50 Hz/32 A/3PH Power consumption: 12 kW Refrigerant: R404A Vacuum: 0 – 95 % Mixing tank volume: 400 litres Max. filling: 300 litres Mixing arm speed: - 25 to + 25 RPM Tumbler speed: 0 to 25 RPM Lifting capacity: max. 400 kg Overall dimensions: 2,200 x 2,340 x 1,950 mm (LxWxH) Net weight: approx. 1,400 kg

Manufacturer: RÜHLE (Germany) Machine type: SR3 BiTurbo YOM: 2021 Operating Hours: ~ 8,500 h Application: Dicing, slicing, and grating Suitable Products: Cheese, meat, vegetables, and various other foodstuffs Throughput: up to approx. 3,500 kg/h Cutting Speed: 300 cuts/min (continuous), 200 cuts/min (pulsating) 300 cuts/min (continuous) 200 cuts/min (pulsating) Product Temperature: -5 °C to +80 °C Power: 14 kW Machine Weight: 2,000 kg Includes: Spare parts package (wear parts, belts and spacers) Maintenance: Regularly serviced Condition: Excellent / very well maintained

Rühle PR 8 injector, 8-needle brine injector, with hand sprayer, new hoses and fittings, control valve, valve and seals on the needle beam, impellers, seals and bearings of the pump, pressure gauges, splash guards, Connection 400V, dimensions LxWxH approx. 125x50x155cm, weight approx. 166kg, Year of manufacture 2001, good used condition, fully functional

Injector Rühle PR 15, brine injector with 15 needles, new have been made: all hoses and connections, pressure gauges, impellers, valve on the needle beam, needle bar sealing rings, mixing valve, bearings and pump drive sealing rings, Connection 400V, dimensions LxWxH approx. 120x50x157cm, weight approx. 145kg, very good used condition, fully functional

Rühle PR 8 injector, 8-needle brine injector, newly made: all hoses and clamps, pressure gauges, control valve, sealing rings needle beam, sealing ring valve needle beam, impeller, Connection 400V, dimensions LxWxH approx. 110x50x156cm, weight approx. 142kg, good used condition, fully functional

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V – 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm

GRADING - WEIGHINF MACHINE MAREL, TYPE: A320 Technical description: Number of stations: 8 Feeding conveyor: 4300 x 1005 x 1970 mm, working width: 450 mm Weighing conveyor: 1900 x 750 x 1640 mm, working width: 300 mm Grading conveyor: 6200 x 1500 x 1550 mm, working width: 385 mm

SEPARATOR, SEPAMATIC, TYPE: SEPA 410 Technical description: Machine number: 107 306 Drum diameter: 90 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Power supply: 400 V, 50 Hz, 6 A, 2,2 kW Capacity: up to 800 kg per hour Dimensions: 1500 x 1200 x 2850 mm Includes pallet with additional drum with holes: 3 mm, and spare parts.

4 WAYS PINE-BONE REMOVER, WMT Technical description: Material: Stainless steel Aisi-304 Power supply: 380/440 V - 50/60Hz Mesh width: (x4) 245 mm Working width: (x4) 210 mm Dimensions: 2050 x 1650 x 1650 mm

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Electrical specifications: 3x400 V+N+PE/50 Hz/16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

Fish Skinning Machine Make: Steen Model: ST600 Built 2008 Regularly serviced and well maintained

Deglazing Machine Electrically heated 1000mm belt width Make: Sharp Built 2019

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

FILLETING MACHINE FOR MACKEREL, VMK Technical description: Belt width:70 mm Power supply: 220/380 V, 50/60 Hz Total dimensions: 2360 x 800 x 1680 mm

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

Used Baader fish fillet machine type 483. Year of manufacture 1993.

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

The machine has been maintained well, bought in 2021. Located in Estonia, Harju. Video available.

POSS 1500 PDE SEPERATOT IN GOOD CONDITION

SEPAMATIC MEAT SEPERATOR 10 MM DRUM IN GOOD WORKING CONDITION

see picutre for hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.06 m, Overall length= 0.9 m, Overall width= 0.71 m, Net weight= 75 kg,

Height=1.46 m, Overall length= 0.51 m, Overall width= 0.53 m, Net weight= 208 kg,

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

Slicer Bizerba Year of construction 2000 Price on request

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock