screen pre press: imagesetter and CTP used for sale

Unused, like new.

16 diodes

Screen PTR 8600 E Built: 2010 Included one XMF for TIFF with PC. Developer G&J 125 – ZAC Available immediately.

Size: 830 x 660 mm Technical details: Max. size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipments: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.

Screen 4300 E year 2006 16 diodes Plate Winding Cycles 136.843 exposure time 7,835 h PC with RIP Harlequin good condition

CTP 4-up Thermal PlateSetter Screen PT-R 4300-E Year 2010 16 channel infrared laser diodes Plate size : Min 324 x 370 mm Maxi 830 x 660 mm Plate Thickness: 0,15 - 0,30 mm Speed: 11 plates/hour at 2400 dpi RIP Harlequin Version 8.3

-Thermal CTP Year 2010 -64 diodes -Plate Count: 196,000 plates done -Exposure Time: 25,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 304 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400 dpi -Productivity: Up to 23 plates/ph at 2400 dpi -Conveyor to Plate processor Agfa Elantrix 125 SX for thermal plates -Plate stacker Elantrix ST 125 EX and trolley -Complete with RIP Agfa Apogee Prepress and Workflow, computers and monitors -Available immediately

Agfa Acento E, 16 Diodes, 116000 Plates

Screen Truepress 344N with Trueflow RIP and Trueflow imposition, using processless plates, Tehnotrans cooling and circulating system with automix, ca. 6 mio. impressions. In very good technical condition, under power in the printshop.

All spare parts are sold individually or as a complete set. Those who purchase everything will receive an attractive discount.

Printing plates intermediate table Screen AT-T 4000; cleaned and tested; Inlet width 850mm; suitable for screen imagesetters. Plate conveyor Screen AT-T 4000; cleaned and checked; working width 850mm; used for screen CTP.

Screen AT-T4000, 4-up Conveyor / Bridge

DAINIPPON SCREEN DIRECT SCANAGRAPH SG-608 II Technical data see photo -Mounting device -2 storage cylinders The system has been upgraded for electronic image transmission. Data imput directly on Macintosh, screen and programs (Photoshop) etc. are included. (A new Mac version was needed for the image editing.) On request, a second scanner of the same type can be provided free of charge for any spare parts.

Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

Flexo Laser FL- Piccolo (Xeikon) – flexo CTP year 2008 fiber laser 20W – 1.25 plates/h approx. 3,000 m2 exposed rotating external drum vacuum Digital Exposable Photopolymer Flexo Plates all thickness, all brands exposable size 635 x 762 mm Resolution 2540 dpi data format separated 1 bit tiff weight 500 kg good condition

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Film imagesetter Linotronic 630 Post Script RIP 50 exposure format: 483x450mm (19x17.7inch) without register option 483x428mm (19x16.9inch) with register option Material width film: 280,310,340,370,400,430,460 mm Min. width and length not specified Dimensions (W x H x D) 820 x 890 x 960 mm (32.2 x 35 x 37.8 inch)

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

original Kodak laser head lift for TH3

max. plate format 1130 x 950 mm 64 Laser Diodes 405nm Resolution 2400 dpi Platecounter 31260 Laser on time 940 hours only well-maintained available immediately delivery worldwide, Price on request

External RIP and Developer

BasysPrint 855 (Online System) Built 01/ 2010 2-Laser Head UV,405nm Exposed Plates 85600 Max:Plate Size 920 mm x 1,080 mm Min: Plate Size 323 mm x 450 mm Cassettes Manager 1 Cassettes With Kodak Merxury 85 PlateProcessor Server PC, 20 TFT Monitor.

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

Machine complete with PC, RIP, etc.

Agfa CTP with developer format 103x77, 64 diods, year 2008

Advantage N-SL 2010 CTP plate setter Advantage N-SL+ Plate developing machine VPP 68 +Nela fully automatic plate punching machine with video cont Find more here - / Contact us at -

- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP

CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: 013910086 Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Ser. No.: PJ000400 // Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

max. plate size: 625 x 550 mm max. speed plates: 30 /h resolution of impression: max. 2540 dpi Violet Laser incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ser. No.: 023910293 // Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Equipment / Additional information: With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.