WEILER praktikant used machines

Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.

The machine is in good technical condition, a test run is possible by prior arrangement. Lathe WEILER Praktikant 160 AC Year of Make: 1996 Serial Number: 4057 Circumferential diameter over bed: 320 mm Center width: 650 mm Circumferential diameter over support: 160 mm Spindle bore: 35 mm Speed range: 48 – 2500 rpm Drive power: 4 kW Dimensions (L x W x H): 500 × 1240 × 1550 mm Weight: 680 kg

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

“TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Running bezel of a hamlet E110 The bezel is almost unsubstonible

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Used Weiler meat grinder, model 878 AG.

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts