WEINBRENNER gp used machines

pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm ** Good/well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC ...

* General * SKU332X713 * MakeIgefa Weinbrenner * LocationBarneveld * CEcheck * Type061U-600-600 * Pressure * Vacuum possiblecheck * Vacuum possible jacketcheck * Working pressure shell10 Bar * Vacuum possible shellcheck * Working pressure tubes10 Bar * Tubular vacuum possiblecheck * Main Features * Shell (Material)Stainless steel * Tube (Material)Stainless steel * Surface41 m2 * Specified Features - Shell and tube heat exchanger * Heat exchangercheck * Horizontalcheck * Heating surface41m² * Tube capacity582 l. * Number of tubes:178 * Tube diameter33,7 mm * Tube length2200 mm * Wall thickness tubes2 * Max. temperature0°C/+200°C * Shell capacity252 l. * Shell diameter600 * Shell length2500 * Max. temperature0°C/+200°C * Shell connectionsDN80 * Cover connectionsDN500 * MaterialStainless steel 1.4571 (316Ti) * With jacketcheck * General * No.50467 * Year of construction2014 * Mounted o ...

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration  ...

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Scissors

pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mm plate thickness: 20 mm distance between columns: 4100 mm column daylight: 4200 mm no. of strokes: 10-20 Hub/min working pressure: 250 bar total power requirement: 85 kW weight of the machine ca.: 43,6 t dimensions of the machine ca.: 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team  ...

pressure: 250 t chamfer lenght: 3550 mm distance between columns: 3000 mm Control: Cybelelc DNC 1200 total power requirement: kW weight of the machine ca.: 18.500 kg dimensions of the machine ca.: 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping at top and bottom - Die shift - Hydraulic crowning - Support arms - Cybelec DNC 1200 control - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, inclined stop - Protective grille The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm range L-W-H: 4200x2200x3700 mm weight of the machine ca.: 17.000 kg Equipment: - Control conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - Hydraulic punch clamping - Hydraulic die clamping - 4-stage pneumatic die displacement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

floor-plate length: 3000 mm floor-plate width: 1500 mm floor-plate height: 150 mm total power requirement: kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 3,0 x 1,5 x 1,3 m The welding table is made of 15 mm thick steel plates. assembled and welded. The table stands on height-adjustable feet. The mounting holes for the assembly and fastening parts have a diameter of 28 mm. A starter package with alignment and fastening parts is included at a price of € 750,00 (price is included) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sharpened blades Machine with yearly maintenance Strokes per. Min 10 - 35 Back gauge range 10 - 1000 mm Motor size 15 kw Programmable motorised back gauge 1.5 metre side gauge 1.5 metre front support Shadow line light Automatic hydraulic hold down clamps Centralised lubrication Footswitch Shadow light beam Cycle counter Automatic shearing contacts in back gauge Blade gap and rake angle adjustment Front flip stops Adjustable stroke Work chute Hour counter Auto-diagnostics - Operating hours: 40.347 - Folding length: 4.000 mm - Folding length: 4.000 mm - Material thickness stainless steel max: 60/kg/mm2--6 mm - Material thickness steel Fe52/Fe37 max: 45kg/mm2-- 8 mm - Motor power: 5,5 kW - Control: STEP AUTOMATION EASY CUT - Dimensions (long x wide x high): 4.600 x 2.200 x 2.200 mm - Weight: 10.100 kg

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

Tool trolley for cutting machine, fish slicer GEBA GPS 200 (Röscher) Dimensions LxWxH approx. 120x65x97cm, weight approx. 44kg, only car without accessories, used, good condition

Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Dimensions: 1950x1000x2100mm Electric power: 2.5kW

Tumbler Günther GPA 300 K, Cooling tumbler with vacuum pump, volume approx. 300 litres, Year of manufacture 2006, Connection 400V, 3kW, Dimensions LxWxH approx. 185x100x187cm, weight approx. 730kg, good used condition, fully functional

Granulator - Moditec Digicolor Gplus1 / New, unused (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Granulate mill is used for grinding the very hard details, waste - just like the crusher Power: 2.2 kW 6 stator blades, 1 x push, rotor with milling cutters Hopper inlet: 220x170 mm Grinding chamber opening: 240x180 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Hole for material case is prepared for connection with suction conveyor When the shredded molding is blocked/clamped in the cutting chamber, rotor knife will retract and it will restart to crush the molding. Drawer for material case with mixer All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technica ...

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

Height=1.3 m, Overall length= 0.9 m, Overall width= 1.3 m,

Height=1.4 m, Overall length= 0.76 m, Overall width= 1.33 m, Net weight= 300 kg,