3 WEINGARTEN crank presses used machines

Technical data Weingarten Mechanics Press 1600 to Nominal press force from 20 mm before UT 16000 kN Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min Setup stroke number 5 - 10 stroke/min Plunger stroke 600 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 1150 mm Table top dimensions, length x width 3600 mm x 23 Plunger plates dimensions, length x width 3600 mm x 23 Passage between uprights in length 3650 mm Passage between the uprights in the width of 2300 mm Transfer height above press table 750 mm Quick Tension Plunger Plate: Swivel voltage, stationary 4 pcs. on each side Tool clamping flange thickness 70-0.2mm Clamping force  ...

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...

Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.

For sale is an 800 to step press. Technical data see photos. Press we sell from location.

Weingarten Excenter Press

pressure: 63 t distance between columns: 0 mm stroke: 160 mm table surface area: 630 x 500 mm dayligth: 400 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single column - eccentric press WEINGARTEN type E 40 Masch. No. 643 / 62 Year of construction 1963 Pressure capacity 40 ton. Projection 250 mm Table opening 150 x 80 and Ø 200 mm Table area 560 x 460 mm Plunger area 250 x 200 mm Adjustable ram stroke 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100 / 130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 volts, 50 Hz Table height above floor 840 mm - Clutch-brake combination thanks to WEINGARTEN friction threaded clutch with OT flow protection - Electric stroke release via two-hand operation - Overload protection by crushing plate - Manual grease central lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirements L x W x H 1800 x 1500 x 2200 mm Weight 3.1 ton.

pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 415 mm stroke: 8-140 mm no. of strokes: 48 Hub/min ram - range of adjustment: 80 mm table surface area: 920x670 mm ram surface: 700x450 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 1500x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 280 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 620x500 mm ram surface: 310x260 mm hole in the table: Ø 250 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1200x1900x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 t, 400 mm, 112 mm

Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

(1961) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1961 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.174 Seconds Safety Distance: 278 mm Motor Power: 11 kW

(1963) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1963 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height Range (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.154 Seconds Safety Distance: 246 mm Motor Power: 11 kW

(1970) 200t Müller-Weingarten Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This powerful 1970 mechanical press is engineered for heavy-gauge metalworking, offering a significant 200-ton pressing capacity and a maximum sheet thickness of 28 mm. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: AR 200 Year of Manufacture: 1970 Nominal Force: 200t Max. Thickness: 28 mm Stroke Rate: 32 strokes/min Ram Stroke: 40 – 180 mm Ram Adjustment: 110 mm

(1984) 100t Müller-Weingarten Eccentric Press High-Speed Single-Column Eccentric Press with Versatile Stroke Adjustment This Müller-Weingarten press is a highly adaptable industrial machine, featuring a 100-ton nominal force and an impressive stroke rate of 60 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ARP 100 Year of Manufacture: 1984 Nominal Force: 100t Stroke Rate: 60 strokes/min Throat Depth (Projection): 375 mm Frame Passage (Front to Back): approx. 570 mm Max. Distance (Table to Ram): 384 mm Adjustable Ram Stroke: 8 mm – 137 mm Intermediate Strokes: 8, 23, 43, 63, 81, 97, 111, 122, 130, 135, 137 mm Ram Adjustment: 80 mm Ram Clamping Surface (W x D): 700 mm × 450 mm Ram Shank Hole (Ø x Depth): 50 mm × 85 mm Ejector Travel: 55 mm Table Clamping Surface (W x D): 920 mm × 660 mm Tabl ...

(1979) 100t Müller-Weingarten Eccentric Press High-Utility Eccentric Press for Flexible Stamping and Forming Operations This Müller-Weingarten model is a versatile single-column (C-frame) press designed for high-speed production with a stroke rate of 60 per minute. It features a comprehensive range of 11 adjustable stroke settings, making it highly adaptable for various industrial metalworking tasks from shallow blanking to deeper forming. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ARP 100‍ Year of Manufacture: 1984‍ Nominal Force: 100t‍ Stroke Rate: 60 strokes/min‍ Throat Depth (Projection): 375 mm‍ Body Passage (Front to Back): approx. 570 mm‍ Max. Distance (Table to Ram): 384 mm (at bottom of stroke, adjustment at top)‍ Adjustable Ram Stroke: 8 mm – 137 mm‍ Intermediate Strokes: 8, 23, 43 ...