7 WINTER macerators used machines

Winterhalter GS 502 Basket Push-Through Machine The Winterhalter GS 502 rack pass-through machine offers you all the necessary basic features that a rack pass-through dishwasher must have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface radiator and screening system. Thanks to the concentrated cleaning power, Winterhalter guarantees hygienically clean washing results, even with heavy soiling. Specifications: Theoretical power: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (canopy open 1932) mm Entry height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Fuel tank capacity: 42 l Rinsing water requirement per wash cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water flow pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected lo ...

Dimensions (L/W/H): 2860x1120x1140 mm Weight: 1260 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2230x3900 mm Weight: 1500 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 820x1150x1580 mm Weight: 450 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

Dimensions (L/W/H): 0x0x0 mm Weight: 450 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x1300x1780 mm Weight: 1000 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

Dimensions (L/W/H): 2800x1140x1100 mm Weight: 1070 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts  ...

Dimensions (L/W/H): 2960x1500x2000 mm Weight: 4000 kg Total power requirement: 19,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2216x1857x2488 mm Weight: 900 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2850x1000x1050 mm Weight: 0 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3600x1650x2150 mm Weight: 6500 kg Total power requirement: 52 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 Melting Furnace Mfc.: De Winter Built: 2014 Type: 2 Chambers furnace Capacity: 75 Ton – 6.5 t/h

Part Number: 7316 SPECIFICATIONS - Track width 350mm - working width of the shaft with saws 355mm - max blade diameter 450mm - max cutting height 170mm - blade bore diameter 70mm - table top dimensions 1850x790mm in advance: -Triggers - 2 slip shafts, smooth, metal - shaft with saws - 3 slip shafts, smooth, metal From below: - guide strip -Triggers -caterpillar - Pulling gear shaft, metal - central lubrication, electric - Infinitely variable feed speed - electric body lifting up/down approx. 1kW - feed motor 2.2kW - main motor 75kW - total dimensions length/width/height 2600x1800x1700mm - weight 2700kg – used multi-rip saw – very good condition Net Price: 68900 PLN Net price: 16000 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)

quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 1,25 - DP 20,3 - EW 30° - HBR=150 - ID-Nr. 69601_01 The “classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL. ...

quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 DP max. 7,8 - EW 20° - HBR=600 - ID-Nr. 69621_1 The “classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL ...

quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2-6 - DP 12,4 - EW 20° - HBR=2.500 - ID-Nr. 69629_1 The “classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL. ...