ZENO ztll used machines

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Chopper Zeno Type: ZTLL 1150 x 1580 Year of Make: 1988 Rotor width 1150 mm Rotor diameter 380 mm Rotor speed 110 rpm. Hopper capacity approx. 5 m³ Capacity approx. 3 m³/h Hydraulic Moving Floor Both hydraulic cylinders for the moving floor were renewed in 2021. Motor 30 kW Weight approx. 3500 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Intake opening: 1.400 x 2.200 mm Motor power: 37 kW, industrial gearbox Rotor flight circle: 450 mm Rotor speed: approx. 110 rpm Cutting system: 24 pcs. single teeth Rotor bearing: Flange bearing Hopper standard Machine weight: approx. 6.100 kg

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Intake opening: 800 x 1000 mm Motor: 15 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 RPM Rotor cutting tools: new rotor with cutting inserts Screen design: reinforced, with ribs Hopper: With cover Machine weight: approx. 1,950 kg

Inlet cross-section: 800 x 1000 mm Drive: 18.5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 RPM Rotor version: new rotor with cutting inserts Screen design: reinforced solid basket, with ribs Hopper: With cover Machine weight: approx. 1,950 kg Dust nozzle: Ø 250 mm

Inlet cross section: 1200 x 1600 mm drive: 55 kW rotor flight circle: Ã? 600 mm rotor design: 36 PCs. cutting plates 60 x 60 x 30 mm screen perforation: 40 mm, HARDOX Counter knife with cutting gap adjustment

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Intake opening: 1,400 x 2,300 mm Motor: 45 kW Rotor flight circle: 450 mm Rotor speed: approx. 120-140 RPM Rotor version: 24 tool holders with cutting inserts Screen design: reinforced, hydraulically hinged, mechanically locked Screen perforation: Ø 80 mm Counter knife with cutting gap adjustment, hydraulically swivel-mounted Hopper: 1,300 mm high, without lid Machine weight: approx. 7,500 kg

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor cutting tools: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe: 200 mm diameter Machine weight: approx. 900 kg

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Inlet cross-section: 420 x 750 mm drive: 11 kW rotor flight circle: 250 mm rotor speed: approx. 140 RPM rotor design: 10 single tooth screen version: ribbed reinforced Hopper: 1,050 mm high, with cover connecting Piece: Ø 200 mm diameter machine weight: 900 kg

Inlet cross section: 600 x 1000 mm drive: 11 kW rotor flight circuit: 250 mm rotor speed: approx. 140 RPM rotor design: 18 single tooth screen: ribbed reinforced Hopper: 1,050 mm high machine weight: approx. 1600 kg

Inlet cross-section: 1200 x 1600 mm drive: 55 kW rotor flight circle: Ø 600 mm rotor speed: approx. 84 RPM rotor design: 56 PCs. cutting plates 60 x 60 x 30 mm screen perforation : Ø 40 mm counter knife: with cutting gap adjustment machine weight: ca 7,000 kg

Inlet cross section: 2000 x 1900 mm drive: 2 x 75 kW rotor flight circle: Ø 600 mm rotor speed: approx. 84 RPM rotor design: 152 PCs. cutting plates 40 x 40 x 20 mm screen perforation: suitable to achieve the safety levels P2 to P5 according to DIN 66399-2 Counter knife with cutting gap adjustment machine weight: 21,000 kg

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Inlet cross-section: 1400 x 1600 mm drive: 55 kW rotor flight circle: 600 mm rotor speed: approx. 96 RPM rotor design: 50 PCs. cutting inserts rotor bearing: pedestal bearing screen perforation: Ø 20 mm machine weight: 9,100 kg

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

Inlet cross section: 1400 x 1600 mm drive: 90 kW rotor flight circle: 600 mm rotor speed: approx. 84 RPM rotor design: 34 PCs. cutting plates 60 x 60 x 30 mm on tool holders screen perforation: 60 mm counter knife: with cutting gap adjustment machine weight: approx. 10,000 kg machine number: 35

ZENO waste Shredder ZTLL 2000 x 1900 Inlet cross section: 2000 x 1900 mm drive: 90 kW rotor flight circuit: 710 mm rotor speed: approx. 110 RPM rotor design: 51 PCs. cutting plates 80 x 80 x 55 mm on tool holders screen perforation: 20 mm counter knives: with cutting gap adjustment machine weight: approx. 16,500 kg machine number: A 36

ZENO waste Shredder ZTLL 1200 x 1750 ideal for the shredding of IBC containers Inlet cross section: 1200 x 1750 mm drive: 55 kW rotor flight circle: 1000 mm rotor version: 51 cutting inserts, 50 x 50 mm Screen: 40 mm machine number: G-1-96