3 ZOPF tube bending machines used machines

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serialnumber: 20610011 Year of construction: 2020 Volt / Hz / Kw: 400 V / 50 Hz / 0.75 Kw Country of origin: Germany

Shaft Ø: 40 mm Bending Capacity: Flat bar upright at 500 mm Ø: 60 x 10 mm flat at 400 mm Ø: 100 x 15 mm square at 500 mm Ø: 35 mm L-iron leg outwards at 450 mm Ø: 50 x 50 x 6 mm L-iron leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-iron T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm electr. Connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 400 kg

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 450 kg range L-W-H: 1100x800x1500 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 mm : 30 mm L-beam: 20 x 20 x 4 mm flat steel: 25 x 6 mm Axis diameter: 20 mm work speed: 11 U/min total power requirement: 0,2 kW weight of the machine ca.: 80 Kg dimensions of the machine ca.: 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400 V weight: 395 kg Overall size: 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 2905 U/min weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.