[ dealer profile ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
2024 - Mingda - MD1000D - 3D printing machine
metal working machines / other metal working machines / 3D Printers
Mingda MD-1000D, approx. 500 operating hours. Installed and used in Belgium. Fully operational and ready to use immediately. SPECIFICATIONS Build volume: 1000 x 1000 x 1000 mm FDM, dual extruder, direct drive, 1.75 mm filament Nozzle 0.4 mm (0.6 / 0.8 / 1.0 optional), max 350 °C Heated bed max 110 ...
Manufacturer:
Model:
Type of machine: 2024 - Mingda - MD1000D - 3D printing machine
item-No.: 170321998
Quantity: 1
Date: 14.10.2026
Location: 2275 Lille
Auction start price: 5000 EUR
Auction Price: 5,000 EUR
Seller-item-No.:98306d18-d403-4f9e-b6ee-9a7c26e6ff9a
Go to auction:
End of auction: 28.10.2026 - 16:32
Mingda MD-1000D, approx. 500 operating hours. Installed and used in
Belgium. Fully operational and ready to use immediately.
SPECIFICATIONS
Build volume: 1000 x 1000 x 1000 mm
FDM, dual extruder, direct drive, 1.75 mm filament
Nozzle 0.4 mm (0.6 / 0.8 / 1.0 optional), max 350 °C
Heated bed max 110 °C (60 °C in approx. 75 s), flexible PEI sheet
Enclosed build chamber
Max 500 mm/s (recommended 200 to 300 mm/s), acceleration 10,000 mm/s², flow 40 mm³/s
Materials: PLA, ABS, ASA, TPU, PETG, PA-CF/GF, PA12-CF, PET-CF/GF, HtPA-CF/GF, ABS-GF25, ABS-CF20, PA-GF25/CF25
Support materials: S-Multi, S-HtPA, water-soluble PVA
Klipper firmware, 7\" touchscreen, WiFi and Ethernet, camera
Remote printing and monitoring, multi-machine control
10 x 10 point auto levelling, input shaper, flow control
Filament run-out detection, power loss recovery, power-on self check
Closed-loop stepper motors, modular linear guide system, accuracy ±0.1 mm
Dual part cooling system
Emergency stop
100 to 240 V AC, 50/60 Hz, rated power 2700 W
Dimensions: 1680 x 1365 x 1665 mm
Slicer: MINGDA Cura, PrusaSlicer compatible
CONDITION
Used, approx. 500 operating hours. Good working condition.
Auction-ID: A3-46137-21602
SPECIFICATIONS
Build volume: 1000 x 1000 x 1000 mm
FDM, dual extruder, direct drive, 1.75 mm filament
Nozzle 0.4 mm (0.6 / 0.8 / 1.0 optional), max 350 °C
Heated bed max 110 °C (60 °C in approx. 75 s), flexible PEI sheet
Enclosed build chamber
Max 500 mm/s (recommended 200 to 300 mm/s), acceleration 10,000 mm/s², flow 40 mm³/s
Materials: PLA, ABS, ASA, TPU, PETG, PA-CF/GF, PA12-CF, PET-CF/GF, HtPA-CF/GF, ABS-GF25, ABS-CF20, PA-GF25/CF25
Support materials: S-Multi, S-HtPA, water-soluble PVA
Klipper firmware, 7\" touchscreen, WiFi and Ethernet, camera
Remote printing and monitoring, multi-machine control
10 x 10 point auto levelling, input shaper, flow control
Filament run-out detection, power loss recovery, power-on self check
Closed-loop stepper motors, modular linear guide system, accuracy ±0.1 mm
Dual part cooling system
Emergency stop
100 to 240 V AC, 50/60 Hz, rated power 2700 W
Dimensions: 1680 x 1365 x 1665 mm
Slicer: MINGDA Cura, PrusaSlicer compatible
CONDITION
Used, approx. 500 operating hours. Good working condition.
Auction-ID: A3-46137-21602
Share this machine on Facebook: