Band Saws used for sale (135)

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm

cutting diameter: 220 mmsaw band length: 2450 mmcutting width: 250 mmcutting speed: 40 / 80 m/mindimensions of saw-band: 2450 x 27 x 0,9 mm: 100 mm: 90 mm: 90 x 90 mm: 160 mm: 160 x 110 mm: 250 x 190 mmtotal power requirement: 0,75 / 1,1 kWtable height: 925 mmweight of the machine ca.: 218 kgdimensions of the machine ca.: 1300 x 700 x 1530 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

cutting diameter: 255 mmsaw band length: 2765 x 27 x 0,9 mmtable height: 950 mm: 18-110 m/min: 255 mmcapacity 90 degrees: square: 240 mmcapacity 90 degrees: flat: 300 x 180 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: square: 190 mmcapacity 45 degrees: flat: 200 x 160 mmcapacity 60 degrees: round: 135 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 130 x 100 mmcapacity 45 degrees: round: rechts 180 mmcapacity 45 degrees: square: rechts 160 mmcapacity 45 degrees: flat: rechts 180 x 100 mm: 1,5/1,8 kW: 350 kg: 1700 x 900 x 2000 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, eme ...

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

cutting diameter: 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: -- mm: 350 mm: 15 - 100 m/min: 4,0 kW: 2800 kg: 2200 x 3200 x 2200 mmFully automatic band saws with two-column guide for series cuts in particularmaterials that are difficult to machine and solid material.With this machine, MEP offers you a machine that is technically on thehighest level and by using the highest quality materials one is nothas an unbeatable, robust and torsion-resistant structure. An extremeRobust saw bow made of gray cast iron ensures the necessary stabilityimpressive cutting results and the strong cast iron columnswhich the saw arch slides by means of pre-stressed linear guides take care of themselvesat maximum load for the highest cutting precision. The modernMachine control (MEP NC 5.0) offers the user maximum ease of use andensures trouble-free operation. (Check/evaluation/correction inreal tim ...

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

cutting diameter: 305 mmsaw band length: 3375 mmcutting width: 350 mmdimensions of saw-band: 3375 x 27 x 0,9 mm: 305 mm: 260 mm: 350 x 200 mm: 250 mm: 230 mm: 230 x 200 mm: 175 mm: 155 mm: 170 x 100 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 1,8 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mmsaw band length: 2765x 0,9 x 27 mmcutting width: 300 x 180 mmturning speeds: 35 + 70 U/mintotal power requirement: 1,8 kWweight of the machine ca.: 450 tdimensions of the machine ca.: 1,7 x 1,23 x 1,75 mSPECIAL PRICE!Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250Super HA-I Easy• miter left 60° + right 45°• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Hydraulic vice can be moved sideways a.• Guided, high quality industrial bearings• Solid vice + machine casting• Large machine bed• Machine base with tool compartment and chip drawer• Cut monitoring by ammeter• Cutting pressure feed regulator• Support roller (infeed side)• Ball bearing turntableSemi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the s ...

cutting diameter: - mmsaw band length: - mmtable height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 227 mmsaw band length: 2455 mmtable height: 840 mmcutting width: 260 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2455 x 27 x 0,9 mmcapacity 90 degrees: round: 227 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 260 x 220 mmcapacity 45 degrees: round: 150 mmcapacity 45 degrees: square: 145 mmcapacity 45 degrees: flat: 200 x 220 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,25 tdimensions of the machine ca.: 0,8 x 1,4 x 1,5 mMiter band saw- automatic cut- Base frame- Coolant pump- Chip brush for cleaning the saw band- Vise with quick adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3100 x 27 x 0,9 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280 x 190 mmband speed: 37 / 74 m/minsawing motor: 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,3 mMiter band saw- Semi-automatic- Double miter- Material detection during loweringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 x 27 x 0,9 mmtable height: ca. 800 mmband speed: 36/72 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mMEP sawing machine:Saw band bow, vice unit and base made of durable cast ironPrecision grade marking on the cast iron structureElectrical system (with fully identifiable electrical wiring andLow voltage system 24 V)Switch handle IP 55 for manual cycles (if available)Rotating scraper brush for the saw bandClamping unit with vice for quick approachAccurate stops with adjustment for miter cuts at 0°, 45°, 60° leftBi-metal saw band 2950 x 27 x 0.9 mmKeys, instructions for use and instructions for ordering spare parts in theUser languageSHARK 281 with manual operation and SHARK 281 CCS with manual operation and cuttingwith automatic head feed by its own weight.CCS (Cut Control System) w ...

: 1000 mm: 1000 mm: 1200x1000 mmsaw band length: 11300 x 80 x 1,3 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 18 kWweight of the machine ca.: 9,0 tdimensions: 5,0 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They ...

: 900 mm: 900 mm: 900x900 mmsaw band length: 9300 x 67 x 1,1 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 11 kWweight of the machine ca.: 8,45 tdimensions: 4,485 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They m ...

cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mSPECIAL PRICE!-Miter cuts up to 60° left-Cutting speed 35 / 70 m / min.- Vice with quick release device-Carbide saw band guide-Tape tension control-Electr. automatic coolingAuto-Cut-System = 3 step system-Automatic saw frame lowering via the hydraulic cylinder-Infinitely adjustable feed-with limit switch- rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed-Manual modeShare of freight costs 85 EURThe data for this ad was created with ...

cutting diameter: 240 mmsaw band length: 2910 x 27 x 0,9 mmcutting width: 310 mmtable height: 900 mm: 35 + 75 m/min: 1,1/1,8 kW: 470 kg: 800 x 1720 x 1450 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, emergency stop separately- EMC (Electromagnetic Compatibility), UVV- Current consumption display (saw band wear history, tool monitoring)- Automatically more performance with the proven Berg & Schmid 3-stage AutoCutsystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 230 mm: 2730 mm: 320 mm: 230 mm: 320x130x mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 250 mmcapacity 90 degrees: flat: 380x250 mm: 260 mm: 250 mm: 300x200 mm: 180 mm: 170 mm: 200x170 mm: 240 mm: 210 mm: 280x160 mmdimensions of saw-band: 3770x27x0,9 mm: 385 mmspeed: 40/80 m/mintotal power requirement: 1,5/1,8 kWweight: 695 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mmsaw band length: 0/ mmtable height: 0/ mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 4570 x 27 x 0,9 mmtable height: mmcutting width: 450 x 280 mmpower capacity: 4,0 kWcutting speed: 15 - 105 m/minengine: 380 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,8 x 0,8 x 1,2 mBand saw with- coolant device- mitre deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 mm: 165 x 310 mmsaw band length: 2.725 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tThe Z252/DG has the following equipment:- Hydraulic semi-automatic,- Double miter 60° left/45° right- emulsion pump,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 560 mmsaw band length: 7.260x54x1,6 mmControl: mit 99 Programmen work height max.: 650 mmChip coveyor: inkl. power capacity - table: 10 HPsawing motor: 650 kWweight of the machine ca.: 4.800 kgdimensions of the machine ca.: 3.400x2.050x2.380 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mmsaw band length: 8200 x 41 x 1,3 mmcutting width: 810 mmcutting capacity - flat: 480 x 850 / 45° mmcutting capacity - round: 480 / 45° mmspeed: 20 - 100 m/minsawing motor: 4 kWtotal power requirement: 6 kWweight of the machine ca.: 3100 kgdimensions of the machine ca.: 3000 x 1200 x 2350 mmAccessories:• Inverter• hydraulical vice• automatical movement to the top via hydraulical cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mmMotor output: 1,2 kW: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 36 + 72 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw band length: 4400 x 34 x 1,1 mmband speed: 15 - 150 m/mincapacity 90 degrees: square: 500 x 335 mmcapacity 90 degrees: round: 335 mm: 330 mm: 320 x 335 mm: 305 mm: 305 x 335 mm: 180 mm: 170 x 335 mmwork height max.: 750 mmMotor Capacity: 3 kWmachine weight ab.: 1320 kgdimensions: 1450 x 2350 x 1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210x210 mmcapacity 90 degrees: flat: 230x185 mm: 150 mm: 150x150 mm: 150x210 mm: 90 mm: 90x90 mm: 90x100 mmdimensions of saw-band: 2450x27x0,9 mmcutting speed: 35/70 m/minwork height max.: 915 mm: 265 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 1550x870x1740 mmZimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position.Standard features:- Hydraulic cylinder- emulsion pump- Eccentric tensioner- Underframe- saw blade- 400V plug 16AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table-size: 670 x 670 mmthroat: 1030 mmworkpiece height: max. 300 mmsaw band length: min. 4700 mmsaw band length: max. 4800 mmtotal power requirement: kWweight of the machine ca.: 1,0 tAccessories: saw band welding and grinding attachment- table swivelling left / right- hydr. feed in tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: kWweight of the machine ca.: 0,35 tThe Z252/DG has the following equipment:- hydraulic cylinder,- emulsion pump,- eccentric clamp,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 330 mm: 450x320 saw band length: 4250x34x1,1 mmband speed: 40 + 80 m/mintable height: 845 mmsaw band width: 34 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,985 tdimensions of the machine ca.: 1,4 x 2,0 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mm: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 20 - 85 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmMotor output: 1,2 kWWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 150 mmcapacity 90 degrees: square: 140x140 mmcapacity 90 degrees: flat: 150x140 mm: 100 mm: 90x90 mm: 100x90 mmcapacity 60 degrees: round: 70 mmcapacity 60 degrees: square: 65x65 mmcapacity 60 degrees: flat: 65x70 mmdimensions of saw-band: 1735x13x0,65 mmcutting speed: 30-80 m/minengine output: 1,5 kW: 150 mmweight of the machine ca.: 37 kgdimensions of the machine ca.: 900x460x500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15-150 m/mincapacity 90 degrees: round: 325 mmcapacity 90 degrees: flat: 500 x 300 mmcapacity 45 degrees: round: 300 mmcapacity 45 degrees: flat: 300 x 300 mm: 200 mm: 200 x 200 mmdimensions of saw-band: 4200 x 34 x 1,1 mm: 60 mm: 165 mmmin. dia.: 5 mmwork height max.: 750 mmtotal power requirement: 3 kWdimensions: 1300 x 2050 x 1400 mmweight: 910 kgStandard equipment:- Fast miter adjustment from 90° to 30° stepless to 0.5° accuracyaccording to scale. The miter turning point is the point of intersection between saw band andMaterial system, thereby no change in the length dimension- At each angular position of the saw frame, the material is parallel in 90°tightened- Complete coolant device with electric submersible pump- Machine stand with chip collecting tray- Precise saw band carbide roller guide, saw blade brush- 1 saw blade on machine 4-6 ZpZ- MEBA high performance package versi ...