used Folding Machines for sale

Description: Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250mm. Sheet width 1270 mm Sheet thickness 2.0 mm Stand width 1050 mm Opening width 48 mm Bending angle max. 135 °weight approx.: 385 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 900 x 1,000 mm

Folding machine HELMUT LOTZE 3100×9 CNC (A3709) Max worklength 3100 mm Max tickness 9 mm Distance between clampblock — ram 300 mm Eletric motor (power) 15 kW Length 5050 mm Depth 1875 mm Hight 2040 mm Weight 15 ton ACCESORIES yes Additional info Type 116 Mechanical drive Cybelec CNC control Cap: 2500 x 10 mm / 2000 x 12 mm

sheet width: 2500 mmplate thickness: 6,00 mmdistance between columns: mmupper beam stroke: 600 mmadjustment lower beam: max. 100 mmbending beam adjustment: max. 100 mmconnected load: OW 5,5 / BW 7,5 kWvoltage: 50 Hz, 400 Vtotal power requirement: kWweight of the machine ca.: 7,00 tdimensions of the machine ca.: m• Bending angle adjustment via potentiometer• Sharpening rail 45°• Bending rail• Operation manualDimensions: approx. L 3.55 x W 1.1 (plus yellow warning plates) x H 2.0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 8,0 mmdistance between columns: 1250 mmangle adjustable from - to: 0 - 180 Gradupper clamping bar adjustment: 350 mmtraversing speed: OW 4,4 mm/sekControl: ELGO TYP 86 back stop - adjustable: max. 1000 mmengine output: 5,5 kWweight of the machine ca.: 3200 kgrange L-W-H: 1900 x 2600 x 1600 mm maintained condition with a lot of bending tools () Pointed rails, radius rails, bending rails, divided goats foot rails etc.Furnishing:- heavy duty heavy duty folding machine, easy to operate- Angle adjustment via electric potentiometer- ELGO NC control unit TYPE 86 for electric backgauge- NC electric backgauge, with rear sheet metal support surface- electric/motorized bending beam- Electric/motorized upper beam .. max. 350 mm- manual lower beam adjustment .. max. 125 mm- manual bending beam adjustment .. max. 125 mm- Upper beam with 2x guide spindles- 1x free m ...

Description: Equipment: - NC control 411 24 - Footswitch - Rear support table 2000mm - Installed bending tools as good as new - Documentation Sheet width 3000 mm Sheet thickness 6 mm Opening width 450 mm Stand width 3100 mm Working height 900 mm Bending angle max. 135 degrees Total power requirement 4.0 kW Machine weight approx. 9.0 t Dimensions L-W-H 4.0 x 2.65 x 2.0weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,000 x 2,000 mm

sheet width: 3000 mmplate thickness: 6 mmdaylight opening: 450 mmdistance between columns: 3100 mmwork height max.: 900 mm: max. 135 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 9,0 trange L-W-H: 4,0 x 2,65 x 2,0 mEquipment:- NC control 411 24- Footswitch- Rear support table 2000mm- Installed bending tools as good as new- DokumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 6,00 mmdistance between columns: mmopening of the upper cheek: 450 mmopening of the down cheek: 125 mmOpening of the bending cheek: 125 mmtotal power requirement: kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: mOperating voltage: 400 V / 50 HzControl voltage: 230 VDimensions: approx. L 4.00 x W 1.90 (plus HA 1000mm) x H 1.60 m- Renewed control cabinet with Siemens control- controlled back gauge 1000 mm- Crowning adjustment- Support table with wheels- various bending rails including sharp rail- segmented goats foot- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2035 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4145 kgdimensions of the machine ca.: 3300 x 1550 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was cr ...

sheet width: 2540 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 6275 kgdimensions of the machine ca.: 3900 x 1700 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was crea ...

sheet width: 3100 mmplate thickness: 6 mmthickness at Niro-steel: 4,5 mmdaylight upper clamping: 100 mmBending angle: 0 - 135 °total power requirement: 7,5 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: 4,5 x 1,72 x 2 mElectric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mmFoot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 2 mmcontrol: Beijer daylight upper clamping: 100 mmBending angle: 0 - 135 °upper clamping drive: 0,375 kWbend clamping drive: 1,125 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 3 x 1,1 x 1,75 mFoot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmdistance between columns: 1020 mmbending angle max.: 135 °total power requirement: 0 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1350 x 850 x 1175 m• maximum bending angle 135°• hand-operatedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number: 0503004E Capacity: 22 GAx48' Max. sheet width: approx. 1220 mm (manual folding machine)weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 500 x 1,200 mm

sheet width: 3050 mmplate thickness: 1,60 mmbending angle max.: 120 °stroke of upper beam: 50 mmwork height max.: 900 mmControl: konv. weight: 2120 kgrange L-W-H: 3620 x 900 x 1350 mm Machine from a plumbing or roofing shopFurnishing:- manual folding machine for thin sheet metal processing- split bending upper tool- analogue bending angle display- manual clamping of the upper beam using the side hand lever- manual pivoting movement of the bending beam- including counterweight for easy swivel design- manual backgauge Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9355195The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Long bending machine JORNS 6m x 1.25 mm Insertion depth 1000 mm, sheet metal supports 9-fold angle control OP 9 manual and automatic, double-foot switch hydr. Roller Shears approx. 2500 kg

Specifications: - Max. working width 2040 mm - max. material thickness at 40 kg / mm², strength 4 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Maximum opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - the lower beam 100 mm - Upper beam drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Space requirement approx. W 3200 x H 1650 x D 1500 mm - Weight approx. 3900 kg

sheet width: 2020 mmplate thickness: 2 mmdaylight upper clamping: 122 mmbending angle max.: 135 °range L-W-H: 2,56 x 0,6 x 1,26 mweight of the machine ca.: 1020 kgMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 2,5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending length: 2000 mm sheet thickness: 1.5 mm steel

Offer 23231 Specifications: - max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 5.5 mm - Bending angle adjustment electronically preselectable 0 - 180° - highest working setting of the upper beam 250 mm - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - of the bending beam 30 mm - the lower beam 90 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3000 x H 1650 x D 1200 mm - Weight approx. 5500 kg - E. foot switch

Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

Specifications: Sheet thickness max.: 2.5 mm Cutting length: 2520 mm Weight, approx.: 2200 kg Dimensions (LxDxH), approx.: 3660 x 800 x 1690 mm 3 honeysuckle segments with the following measurements: - Depth 40 mm - Height 145 mm - Length: 540 / 785 / 1140 mm

Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actuator power: 30KW Power top clam ...

Model 166.2500x7 Built in 1992 . Specifications: . Effective length 2540 mm Bending capacity 7 mm Upper beam opening width 300 mm opening width of the bending beam 40 mm . Motor bending beam approx. 3.8 / 4.6 kW Engine upper beam approx. 3.0 kW Weight approx. 7 to Dimensions, width x depth x height approx. 4 x 1.1 x 1.8 m . Miscellaneous tools Operating instructions

large working width: 2500 mm for sheets up to: 5 mm Upper beam opening width: 300 mm Adjustability bending beam: 40 mm Upper beam drive: 2.2 kW Lower beam drive: 3.5 kW electr. Power supply: 380 V kW Weight: 5000 kg Dimensions: 1260 x 4200 x 1400/1700 mm

sheet width: 2500 mmplate thickness: 3 mmopening of upper clamping bar: 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...

Type DA 425.10 Built in 1985 . Technical data (according to brochure) : Effective length 2500 mm Bending capacity 10 mm Stroke of the upper beam approx. 400 mm Adjustability of the Lower cheek approx. 100 mm Bending cheek approx. 100 mm Motor bending beam approx. 15 kW Engine upper beam approx. 7.5 kW Weight approx. 11 to

Description: Sheet metal bending machine with special dimensions: - Capacity 700 x 3.5 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V Sheet width 1000 mm Sheet thickness 3.5 mm Stand width 1050 mm Top roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.39 t Space requirement approx. 1,4 x 0.9 x 1.2 mweight approx.: 390 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,200 mm

Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

METALPRES KM4E folding machine was built in 1980. Distinguished by its stable, robust construction, the machine designed to fold various types of sheet metal with a maximum length of 2 metres offers excellent quality and precision of machining. The applied manual control together with the angle setting allows the machine to be adapted to the individual needs of the user. In 2023, the METALPRES hydraulic folding machine underwent a general overhaul worth around 14000 PLN net, during which the clutch, sleeves, electrical installation including the cabinet were replaced and the knives were sharpened. Technical data of the folding machine METALPRES KM4E - maximum sheet metal length: 2000 mm - maximum sheet thickness (black steel): 5 mm - maximum sheet thickness (stainless steel): 4 mm - technical documentation - dimensions of the machine (L x W x H): 2600 x 1200 x 1700 mm

chamfer lenght: 1260 mmplate thickness: 1,5 (2,0) mmbending angle max.: 135 °stroke of upper beam: 40 mmstroke of upper beam: 100 mmpower capacity: 0,75 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1,63 x 0,92 x 1,2 mDescription.Our folding machines are manufactured entirely in steel construction and with segmented (pan box) tools. Using the OCM is extremely easy and convenient for series production. Thanks to (Pan Box) tools, it is very convenient for the entire production to be made in the form of a box in various sizes. The movable lower beam is operated by strong springs and a manual handle. With these types, no adjustment is required for the compression of the blade on the upper jaws. With the OCM series, the upper tools can optionally be manufactured in full length. Features: Welded structural steel interchangeable upper tool with T-slot Easy to use open and p ...

chamfer lenght: 2060 mmplate thickness: (2,0) 1,5 mmdistance between columns: 2060 mmbending angle max.: 135 °stroke of upper beam: 120 mmweight of the machine ca.: 1,25 tdimensions of the machine ca.: 2,9 x 0,56 x 1,25 mDescription.Our folding machines are manufactured entirely in steel construction and with segmented (pan box) tools. Using the OCM is extremely easy and convenient for series production. Thanks to (Pan Box) tools, it is very convenient for the entire production to be made in the form of a box in various sizes. The movable lower beam is operated by strong springs and a manual handle. With these types, no adjustment is required for the compression of the blade on the upper jaws. With the OCM series, the upper tools can optionally be manufactured in full length. Features: Welded structural steel interchangeable upper tool with T-slot Easy to use open and press system for t ...

OSTAS SWIVEL BENDING MACHINE TYPE OCM 2060-2 -Capaciteit 2040 x 1.5 mm -Bovenmes in segments -Max buighoek 135 ° PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg

CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg

RAFAMET KM 4 mechanical folding machine manufactured in Poland in 1990 is designed for producing bent sections from metal sheets with a maximum thickness of 4 mm, made by consecutive folding along the length of the workpiece strip. The highly reliable machine also allows for shaping sheet metal boxes, winding sheet metal edges and making wrapped and crimped connections after installation of special equipment. The folding machine is equipped with a control panel, back stop, workspace illumination and pedal for foot control. The machine has the same design and appearance as its twin folding machine OZAMECH KM 4. The total weight of the machine is 3750 kg. Technical parameters of the RAFAMET KM 4 folding machine - working width of the bending slats: 2000 mm - maximum workpiece length: 1500 mm - maximum workpiece thickness: 4 mm - smallest length of crimped sheet metal strip betwee ...

Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 2003 M Condition: very good Offer Type: Used Machine Specifications: Capacity: 2040 x 2.5 mm Drive type: el./mech. Propulsion: 0.75 kW Remark: backgauge, 5 additional bending rails Weight: 1800 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 61.1 Year of construction: 1965 Condition: good Offer Type: Used Machine Specifications: Capacity: 1020 x 1.5 mm Drive type: manual Remark: Material support at the back Weight: 220 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

sheet width: 2000 mmplate thickness: 2 mmdistance between columns: 2040 mmtotal power requirement: 0 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,5x0,64x1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23317 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Minimum inboard height 6 x sheet thickness - Automatic sequential control for a complete workflow - Operation via hand or foot switch - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

sheet width: 3200 mmplate thickness: 2,5 mmweight of the machine ca.: 3,5 tTools recentely grounded.Bending angle preselection via potentiometerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,80 tdimensions of the machine ca.: mSegmented upper beam railManual and automatic bending mode possibleBending angle adjustment via potentiometerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 3,200 mm Max. sheet thickness: 2.5 mm steel Segmented upper beam splint Manual and automatic bending mode possible Bending angle adjustment via potentiometer Weight: 3800 kg

working width: 2040 mmplate thickness: 3,5 mmdistance between columns: 2100 mmsheet width: 2040 mmoutput: 3,7 kwweight of the machine ca.: 2,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.