Measuring Machines used for sale (143)

A total of 6 pieces H7 (23 ; 34; 42 ; 62 ; 70 ; 80mm), unused, different versions, see photos for more details Auction-ID: A7-47753-432

A total of 6 pieces, unused, different designs, sizes and measuring ranges, see photos for more details Auction-ID: A7-47753-419

Auction-ID: A1-47259-4023

Auction-ID: A1-47259-4027

Unused , Measuring range: 25-50mm , Art. 31056050, see photos for more details Auction-ID: A7-47753-427

Auction-ID: A1-47259-4025

A total of 50 pieces, unused, measuring range 2m, see photos for more details Auction-ID: A7-47753-541

Auction-ID: A1-47782-71

Technical Highlights & Features • Precise cutting edge measurement: Specialized optics for exact determination of radii (fillets) and wear. • Automatic determination of cutting edge radii up to approx. 5 μm. • Statistical validation: Determination of the average radius from several hundred sections, including a pass/bad rating. • High-resolution sensor technology: Area-based measurement with up to 5 million measuring points per scan. • Vertical resolution from 0.1 μm, lateral resolution from 0.4 μm. • Speed: Full 3D capture in just about 5 seconds. • Software features: Automatic wear measurement and CAD-based target/actual comparison. Special advantages • Shop-floor suitability: Robust design for use directly in production as well as in the air-conditioned measuring room. • High informative value: In contrast to line measurements, 3D visualization provides a compl ...

Measuring range: up to 600 mmReference: Seitz and Strenger - Lot 4 Dimensions: 400mmx250mmx1000mm Weight: approx. 80kg Auction-ID: A7-46763-106

Top dimensions: 660 x 660 x 130 mmincl. platformReference: Hercegfi - Lot 42 Auction-ID: A7-46763-217

Measuringrange: up to 500 mmReference: Pipit - Lot 172 Auction-ID: A7-46763-41

consisting of 3 digital micrometers, a dial gauge, and a digital height dial gaugeincl. matching tripodsReference: Veatec - Lot 5 Auction-ID: A7-46763-255

Panel dimensions: 630 x 630 mmReference: Beeper - Lot 103 Auction-ID: A7-46763-29

Serial number: 5320002 Measuring range: up to 600 mmReference: Schönichen - Lot 6 Dimensions: 400mmx200mmx950mm Weight: approx. 150kg Auction-ID: A7-46763-262

Mobilepanel dimensions: 1200 x 800 x 160 mmReference: Seitz and Strenger - Lot 9 Auction-ID: A7-46763-107

Serial number: 9B810117, incl. measuring head, type: XM C 1000, camera: 4 megapixels, CMOS image receiver, wavelength in the center of the light recording near infraredmeasuring range: 300 x 250 x 150 mmSmallest display unit: distance 1μ, angle: 0.0001°Measurement accuracy Repeatability measuring table locked: +- 3μMeasuring deviation measuring table locked: +- 8μMax. weight load: 25 kgNumber of probes: 1incl. hand-held probeReference: Schmidt - Lot 88 Auction-ID: A7-46763-88

Weight of the plate: approx. 83 kgDegree of accuracy: DIN 876/0permissible deviation: 0.007 mmActual deviation: 0.00406 mm (delivery condition checked on 10.12.2004)with a MITUTOYO height gauge, type: HDSDimensions of the plate: 630 x 630 x 100 mmReference: Hansmann - Lot 16 Auction-ID: A7-46763-50

Panel dimensions: 630 x 390 x 70 mmCenter height of the concentricity tester: 100 mmReference: Hercegfi - Lot 83 Auction-ID: A7-46763-234

Composed of 2 pcs: base size 30 x 45 mm, never used Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-47249-227

Digital, Portable, LCD Display, Never Used Overall dimensions: 300 x 300 x 300 mm Weight: 3 kg Auction-ID: A7-47249-126

Laser Mounts: Laser Receiver Auction-ID: A7-47086-193

Composed of 2 pcs: base size 30 x 45 mm Overall dimensions: 200 x 300 x 200 mm Weight: 4 kg Auction-ID: A7-47249-308

Digital, Portable, LCD Display, Never Used Overall dimensions: 300 x 300 x 300 mm Weight: 3 kg Auction-ID: A7-47249-218

The scanner comes with: 3 batteries Storage box Charging station Scanner holder Phone holder Carrying case Viewing by appointment Auction-ID: A1-40272-79

Auction-ID: A1-46783-527

height adjustment: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours arepossible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-47531-135

Auction-ID: A1-47826-367

A total of 5 pieces ; unused ; Measuring range: 0-10mm, see photos for more details Auction-ID: A7-47753-405

workpiece diameter: 5 - 1.000 mmmodule range: 0,2 - 25 helix angle: < 90 °Control: Wenzel GearTec faceplate diameter: 750 mmx-axis: 1.200 mmy-axis: 550 mmz-axis: 1.000 mmtotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 3,30 x 3,15 x 2,70 mSoftware:BMain, FPDFPPostAction, GrafTool, TAlign,TAnalyse, TApplication, TCali, TCut_INPUT,TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL,THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot,TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL,TStat, TStylus, WMI, wingeco.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

z-travel: 200 mmClamping diameter of the cutter heads: max. 550 mmMax. permissible cutter head weight: 150 kgMounting plate diameter for cutter heads: 360 mmMounting cone for cutter heads Nominal diameter: 500 mmweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2 x 1,5 x 2,03 mCutter Head Set-Up- and -Measuring MachineIn the manufacturing process for spiral-toothed bevel gears, the quality ofthe gear cutting gear cutting tools used plays a decisive role.Particularly in dry milling, high gear cutting quality and a long servicelife can only be achieved with precisely adjusted cutterheads.The Oerlikon cutterhead setting and testing device CS 200 enables quick andeasy setting of the individual knives and simple adjustment of the individualknives, it checks the position and documents the measurement results. Themeasuring sequence on the CNC-controlled testing device is partially  ...

voltage: 110 - 230 Vfrequency range: 50 - 60 HzPower connection: 0,5 kVADimensions (HxWxD): 1000 x 800 x 1750 mmweight: 150 kgMeasuring machine for bar knives.Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range: 600 mmmeasuring system resolution capability: 0.001 mmweight: 30 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: 2400 mmvoltage: 26,8 V: total power requirement: 26,8 kWweight of the machine ca.: 0,040 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 600 mmz-travel: 250 mmtable-size: 697 x 758 mmweight of the machine ca.: 1.5 tdimensions of the machine ca.: 2 x 1.5 x 1.6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: - mmvoltage: - Vaccessories and equipment:: ASUS All-in-One PC total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mhttp://www.ibendorf.de/ecmc.htmlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 665 mmy-travel: 465 mmz-travel: 350 mmweight of the machine ca.: 0,65 tdimensions of the machine ca.: 1,11,12,2 mNo. 02983D measuring machine DEA OMICRON A 001Working area: 665 x 465 x 350TROLL - microprocessor systemL x W x H 1100 x 1100 x 2200 mmWeight approx. 620 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measurement range: 300 - 400 mmdimension of workpiece: 300 - 400 mmcondition: gut Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 50 - 75 mmworking area: 75 - 100 mmworking area: 200 - 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: PELI 1400 : ja : ja : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 310310 mmworking area: X-Y Tisch 200200 mmdimensions: 1 1 2 mmweight: 500 kgNo. 41283 D - Surface and roughness measuring machineFRT, type MicroProf, year of construction 2007 withTable 310 x 310 mmAccessories:Optical sensor / video lensChromatic sensor CWL F 6 mmChromatic sensor CWL F 300 ymDouble holder for 2 sensorsRaised portal structureXY table 200 x 200HousingPC with monitor and keyboardDimensions (without swivel desk)approx. 1 x 1 x 3 mWeight approx. 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe mechanical zero setter is the standard version of our mechanical zero setters. It has a height of 50 mm and is suitable for precisely determining the position of workpiece surfaces or tool lengths in the Z direction on milling machines or lathes.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.