used Mixers for sale

Used dissolver made by Kofama, model MD500, 500 liters.

Corundum stone mill Manafacturer: Koruma Type: 5-E Item no.: 3046 Year of construction: 1982 Power: 44 kW with screw pump (speed-controlled) overhauled and with new bearings with oulet chute & sight glass with control cabinet mounted on frame LWH: 2000 x 800 x 2000 mm

Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm

Processing plant Manafacturer: Koruma Type: Disho V160/300 Filling volume: 300 l Batch volume: 240 l Year of construction: 1983 No.: 3143 Power: 18.5 kW with pneumatic vertical lift with pressure gauge & sight glass LWH: 1600 x 850 x 2200 mm

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Propeller mixer Manafacturer: Lightnin Type: HP-18 ID: W40608 Power: 0.18 kW Gearbox: Brook Crompton Parkinson Motors with claw (for attachment to the vesssel) with start-stop control LWH: 250 x 150 x 950 mm

Used ploughshare mixer with a capacity of approx. 100 L. Mixer equipped with 1 chopper with a 3 kW motor. Contact parts with the product made of stainless steel. Mixer mounted on a solid base frame and equipped with a vertical frame for mounting additional equipment, eg installation for feeding. Chamber dimensions: length 66cm, diameter 50cm. The dimensions of the whole set: width 135 cm, length 125 cm, height 135 cm.

Loedige FKM 600, ploughshare mixer with double jacket, can be used as a dryer or cooler, total capacity 600 ltr., net capacity 420 ltr., double mantnel 37 ltr, max. 1.5 bar, drive 37 Kw, 400 V. Year of construction 1990

Loedige FKM 600 Ploughshare mixer, total capacity 600 ltr., net capacity 420 ltr., with double jacket, cooling/heatable, mounted on frame, drive 37 kw., 400 V. Loedige Plow Share Mixer, Type FKM 600, total Volume 600 ltr., working Volume 420 ltr., with doubel Jacked, for heating or cooling, Frame mounted, Drive 37 Kw.

Used Loedige laboratory high shear mixer model MGTL 10. Rok budowy 2015. Equipped in interchangeable vessel 10 L volume. Min. batch volume 0,3 L, max. batch volume 0,8 L. Impeller drive 1,1kW (variable speed). Chopper drive 0,4 kW (variable speed. max 6000 rpm). 1 interlocking magnet switch per vessel. Product contact parts: AISI 316 L/ polished Ra < 8?m Outside parts: AISI 304 Seals: silicone, PTFE Filter bag: stainless steel filter cartrige Control cabinet: painted steel housing Dimensions: wxdxh 1000x500x742 mm Weight: approx 150 kg Weight of 10 L vessel: approx. 15kg.

Dissolver mixer Manufacturer: Loher GmbH Type: eA132SA-61 Power: 2.6 kW Diameter dissolver disc: 350 mm in EEx Protection Speed: 960 rpm LWH: 400 x 400 x 1700 mm

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Lödige ploughshare mixers (unused) Stainless steel Brand: Lödige Type: KM 1200 DW Power requirement: 55 kW motor. Incl.: Water injection system Stock: 2 pieces. FR: Lödige Malaxeur à socs de charrue (inutilisés)

Volume: 5 ltr. Material: Stainless steel Drive: 0.37 KW;

Machine name: Vertical Heating Cooling Mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year of construction: 2005 Speed: 104 / 300-1500 rpm Operating hours: Very few operating hours Material: Stainless steel Drive motor: 11 / 45 kW Design: ATEX version / explosion-proof Total capacity: Heating mixer: 210 liters / Cooling mixer: 391 liters Wetted parts: 1.4541 Gearbox: bevel gear motor / motor frequency-controlled Dimensions: L 4605 x W 4225 x H 3550 mm Tech. Documentation: Yes Note: Technikum Betrieb. Wood chips / melanin resin additives Accessories: Stage with stairs, temperature control unit 30 kW, platform scale, control panel, control cabinet, dust filter

Gross volume: 300 ltr. Net volume: 220 ltr. 1 x Head Material: mild steel.

Batch mixers Previously used for building materials

Volume : 2200 ltr. Material : Mild steel --> Batch mixer, mixer shaft speed : 120 rpm

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

Batch mixer with quick discharge bomb bay door 15° the length of the drum. Painted mild steel Steel blade (ploughshare) mixing tools Large feed chute with free shaft end without drive unit (suitable for 50-80 rpm with 55-132 kW) 3 inspection openings on the front of the drum Machine will get complete service

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Material : Stainless steel Dimensions: L 4.40 m x W 3.50 m x H 5.00 m --> Complete mixing tower in stainless steel version: --> with plough charmer : Manufacturer: MINOX Type: PSM 2000 / 3 MK Volume: 2000 ltr. Material : Stainless steel 3 x knife heads Main drive: 37 KW.

Drive: 1.5 KW Volume: 10 ltr. Max pressure: 5 bar Mixer: Ploughshares Machine with double jacket, heating mini bar, Max. Working temperature: 158 ° C; cutting blade Assembly, drive: 1,1 KW.

Material : Stainless steel Drive: 30 KW Volume: 1200 ltr. - incl. control cabinet; --> Mixer with drive mounted on base frame.

Plough-charmed PSM 300 / 1 MK Material : Stainless steel Main drive: 7.5 KW Volume: 300 ltr.; Demonstration machine, 5 - 6 operating hours; --> food suitable. --> mixer available at short notice, price VHB. Facilities: - Mixing plant: ploughshares, - 1 knife head, drive: 4 KW; - Sack shakes, material: stainless steel; - Sack container buckle: at the outlet with manually operated rotary flap; - outlet height of the bagging device: 980 mm; - air flushing on the shaft passages; - Stainless steel control cabinet, fully wired -- > ready for operation; - Machine frame with pallet space, made entirely of stainless steel;

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

Material: High-grade steel Year of manufacture: 2011 Engine: 4 kW Content: 50 ltr 1 chopper You can also get the entire system with all components.

Used Molteni two-tank dissolver. The mixer has two tanks with capacity. 2,500 liters each. While mixing in the first tank, the second tank is emptied. Next the agitator from first tank is hydraulically lifted and transfferd to second tank. During mixing tank is rotated counter to the rotation of the dispersing disc. Hydraulic drive of the agitator. EX. Tank has a manual product scraper from the sides.

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

Continuous stainless steel mixer Content 400 litres Vibrator Interior cladding made of a plastic sleeve

Our product range includes not only new mixer 3-75,000 litre mixing volume, but also machine, which partially or completely be overhauled. In addition we offer transmissions, swing arms, Auger gladly at any time use and Generalüberholten different mixer types (including V-mix, NAUTA - and Vriecomischer) with a comprehensive range of services and spare parts available.

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 &amp; halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Laboratory mixing and homogenizing plant with 2L usable volume, machine incomplete

Laboratory three-roller Manufacturer: Otto Hermann (Hamburg) N°: 4023 Power: 0.1 kW 220 volts Roll width: 150 mm Ceramic LWH: 340 x 250 x 250 mm

Mixing tank: stainless steel V2A Filling volume: 8 l Revolutions: 33 Bulk density: 8 kg/l LxWxH: 1.000x600x750 mm Weight: 110 kg Drive: 0.3 kW Operating voltage/frequency: 230V/50HZ

Belt coil batch mixer type PRB 300 in stainless steel 1.4306; Useful capacity 210 litres; Mixing tools welded to shaft as mixed paddle; Main drive with 4 kW at 66rpm; 1 inspection flaps on top of the mixer with safety lock; mixer suitable for food production; New storage machine

Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg

Process tank 450 l · vertical tank · pressure tank up to 2 bar · main tank made of stainless steel AISI 316Ti · tank insulated with mineral wool with a thickness of 50 mm in the cylindrical part and on the bottom end outer jacket made of stainless steel AISI 316Ti, thickness 2mm · bottom and top bottom pressed DIN 28011 · heating jacket for glycol · circulation pump · heating medium temperature sensor · expansion vessel of the heating system electric heaters - 5 pcs. 4.5kW/400V · control box: controlled by the heating system and the operation of the stirrer · heating medium supply connector DN33.7 · connector for receiving the heating medium DN33.7 Equipment: · manhole DN300 (2 bar) with a safety sensor drain connection (heated) filling connector (heated) · filling level sensor connector · PT-100 temperature level connector · safety valve · Redox + e ...

Colloid mill Manufacturer: Probst & Class (PUC) Type: N/120/E No.: 84.025 Power: 6.5 kW very good condition LWH: 700 x 400 x 400 mm

Agitator 0.12 KW with gear motor Bauer and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: Bauer worm gear motor, 3 x 230/400 volts, 0.12 kW, n1 = 2700 rpm, n2 = 180 rpm (i= 15), IP 55, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

Agitator 0.12 KW with used gear motor Bauer 27 rpm and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: Used gear motor Bauer, 3 x 230/400 volts, 0.12 kW, n1 = 1350 rpm, n2 = 27 rpm, M2 = 24.5 Nm, IP 54, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

Agitator REITZ RW012X244 Agitator 0.12 KW with gear motor ELVEM and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: worm gear motor ELKEM, 3 x 230/400 volts, 0.12 kW, n1 = 1395 rpm, IP 55, weight approx. 8 kg. With motor protection plug. Available in 3 agitator speeds: n2 = 14 rpm (i = 100), n2 = 23 rpm (i= 60), n2 = 23 rpm (i= 56). Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571 Very slow-running, high-torque agitator for use in attachment tanks or cooking kettles.

Agitator 0.12 KW with gear motor SEVA 89 rpm and 2-wing Inclined blade stirrer 244 mm With traverse made of aluminum profiles 45 45 mm. Gear motor: worm gear motor SEVA, 3 x 230/400 Volt, 0.18 kW, n1 = 1340 rpm, n2 = 89 rpm (i = 15), IP 55, weight approx. 8 kg. With motor protection plug. Shaft: precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material stainless steel 1.4571. With rigid coupling made of stainless steel 1.4571

For smaller containers instead of tripod agitators: Agitator REITZ RW0251440200 with 0.25 KW / 1440 rpm and inclined blade stirrer With traverse made of aluminium profiles 45 45 mm. Electric motor: 3 x 230/400 volts, 50 Hz, 0.72 A current, 0.25 kW, 1.66 Nm torque, n = 1440 rpm, IP69K, shaft 20 x 40mm, weight approx. 10 kg. Motor protection socket with switch. Shaft: precision stainless steel shaft D20, length 500 mm, diameter 20 mm, Material stainless steel 1.4571 Coupling: Rigid clutch, bare, material stainless steel 1.4571 Stirrer: Two-wing welded inclined blade stirrer, diameter 200mm, material stainless steel 1.4571

Agitator 0.37 KW 910 rpm and 4-leaf folding stirrer 50 / 150 mm for drums With crossbeam made of aluminum profiles 45 45 800 mm. Electric motor, 3 x 230/400 volts, 0.37 kW, IP55, 6 poles 910 rpm, With motor protection plug and shielded supply cable. Placed at an angle on truss. Stainless steel shaft D20, length 800 mm, diameter 20 mm, material 1.4571. With rigid coupling, bare, material stainless steel 1.4571 Impeller: Four-bladed folding stirrer, diameter 150 mm unfolded, 50 mm folded, for drums, material stainless steel 1.4571

AGITATOR REITZ RW055142244: 0.55 KW / 142 rpm. and inclined blade stirrer With traverse made of aluminum profiles 45 45 mm. Worm gear motor: 3 x 230/400 volts, 0.55 kW, IP55, n²=142 rpm, weight approx. 20 kg. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4571 Coupling: Rigid coupling, blank, material stainless steel 1.4571 Agitator: Two-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571, screwed version, blade adjustable in angle.

Used agitator 0.75 KW – speed adjustment 25 to 86 rpm. With truss made of aluminum profiles 45 45 mm. Electric motor Bauer 0.75 KW, 4-pole, 3 x 230/400 volts, 1420 rpm, IP65. With spur gear i = 29.2 and variable speed gear 25 to 86 rpm. This results in very high torque for highly viscous media. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material: Stainless steel 1.4571. Coupling: Rigid coupling, bare, material stainless steel 1.4571. Agitator: Double-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571. Wing adjustable in angle.

IBC container agitator 0.75 KW with worm gear motor i = 1 : 10 and inclined blade stirrer 244 mm With truss made of aluminum profiles 45 45 mm. Propulsion: worm gear motor, 3 x 230/400 volts, 2800 rpm, 0.75 kW, IP55, n²=280, Weight approx. 25 kg. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301 Coupling: Rigid coupling made of stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571 Sash adjustable angle

Agitator RW151000300: 1.5 KW – 1000 rpm. Electric motor: Electric motor Siemens or WEG 1.5 KW, 6-pole, 3 x 230/400 Volt, 1000 RPM, IP55. Weight approx. 30 kg. With motor protection plug. Suitable for frequency converters. Shaft: precision stainless steel shaft D30, length 1000 mm, diameter 30 mm, Material stainless steel 1.4571. With rigid coupling stainless steel 1.4301. Agitator: 4-leaf inclined blade stirrer diameter 300 mm. Material 1.4571. Suitable for larger containers of breweries, dairies etc.