used Punching Machines for sale

pressure: 100 tstroke: 10-130 mmno. of strokes: 30-90 Hub/minthroat: 330 mmram - range of adjustment: 100 mmtable surface area: 950x660 mmram surface: 540x440 mmhole in the table: Ø 230 mmtable height: 1000 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

very well preserved automatic machine with/without motor reel

pressure: 20 tstroke: 8-38 mmno. of strokes: 100-1800 Hub/mintable surface area: 400x400 mmtable pass: 380x80 mmtable height: 1000 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1600x1600x3100mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate

pressure: 80 tstroke: 8-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 100 mmtable surface area: 900x625 mmram surface: 600x280 mmhole in the table: Ø 150 mmtable height: 1000 mmtool hole in ram: Ø 40 mm: 490 mmweight of the machine ca.: 7 tdimensions of the machine ca.: BxTxH 1800x2200x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

pressure: 63 tstroke: 6-60 mmno. of strokes: 90-550 Hub/min: 300 mmtable surface area: 780x600 mmram surface: 807x460 mmtool hole in ram: Ø 40 mmtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2900x2000x3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tstroke: 10-80 mmno. of strokes: 240 Hub/minram - range of adjustment: 80 mmtable surface area: 850x600 mmram surface: 760x550 mmhole in the table: 850x130 verstellbar mmtable height: 1100 mmtool hole in ram: Ø 50 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: BxTxH: 3000x2000x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

pressure: 315 tstroke: 40-200 mmno. of strokes: 20-100 Hub/minram - range of adjustment: 120 mmram surface: 2000x1100 mmtable surface area: 2000x1200 mmhole in the table: 1700x250 mm: 500 mmcolumn travel -side: 820x650 mmtotal power requirement: 45 kWweight of the machine ca.: 44 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tno. of strokes: 60-300 Hub/minsheet width: 150 mmram - range of adjustment: 6-50 mmtable surface area: 350x400 mmram surface: 250x250 mmhole in the table: 130x150 mmweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tstroke: 10-80 mmno. of strokes: 65-400 Hub/minram - range of adjustment: 80 mmtable surface area: 1030x550 mmram surface: 920x450 mmhole in the table: 700x200 mm: 420 mmweight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible

pressure: 40 tdistance between columns: 450 mmstroke: 20-50 mmram - range of adjustment: 60 mmtable surface area: 370x400 mmram surface: 250x370 mmhole in the table: 120x280 mmtable height: 850 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: BxTxH 1600x1300x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching machine, MAWA model Compact 750. In good condition. Rated power: 41kVA Nominal voltage: 400V Control voltage: DC24 V Circuit diagram E-15207 Rated current: 60 A Input fuse: 63 A Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department  ...

Double stand punching machine Control: UNIDOR Pressing force: 100 to. Stroke rate, continuously variable via PIV gearbox: 50 - 200 H/min. Table area: 1200 x 710 mm. Plunger area: 900 x 500 mm. Plunger stroke: min. 6 mm, max. 82 mm. Tappet adjustment: 100 mm. Distance, table - plunger: 387 mm. Diarrhoea opening in the press table: 120 x 400 mm. Incl. roller feed, type: WE 16, 130 x 3 mm. Weight: approx. 13500 kg. Abm. WxDxH: 2700 x 2400 x 3500 mm. Good operational condition. Freely loaded from location. The machine was demonstrably overhauled in 2021 for EUR 21,000.00. The machine can be inspected and demonstrated under power in consultation and is immediately available.