accessories for machine tools used for sale (2,223)

liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...

length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.

length:1200 mmwidth:500 mmheight:1260 mm

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.

tool taper:50 weight:0,04 t

diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U

size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

feed pressure:13 bartotal power requirement:3 kWweight of the machine ca.:0,15 tdimensions of the machine ca.:1,0 x 0,8 x 1,2 mHigh pressure air cooling device

tool taper:40 weight:0,1 tAppr. 60 ISO 40 NC arbors with various clamping shaftsPackage selling or individual possible, min. 5 pieces

floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m

floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m

Unused AC motor made bei E.M.G. Italy with 260 Watt power and adapted Cucchi pump

workstation with dust exhauster

length:500 mmwidth:320 mmheight:800 mmweight of the machine ca.:0,25 tAngular clamping device made by cast ironwith 5 T-slotss 22 mm

weight:400 kg8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mmwas used for clamping rings on a Vertical Turning Machine

Article: profile turning trip dogManufacturer: SchütteMany different sizes for Schütte profile turning attachment 68AEPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: three-phase current motorManufacturer: Antriebstechnik BauknechtType: RFV 22/4-75Pe.g. to use as spindle motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Tool drive motor for e.g. Schütte S32PC, not usedVariable tool drive for e.g. pickoff in positions A, B, C, DPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical description :CLAMPING/ MOUNTING TABLE- Length 2600mm- Width 1500mm- Height 250mm

pickoff with shaft for Schutte multi spindle automatic lathe SF67, usedpickoff C26GFpickoff shaft C26GF9S1gear WG-67SPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed fingerManufacturer: DifferentConventional feed finger and collets of RS-systemFor multi spindle automatic lathes, used and newPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: pick-off colletsManufacturer: DifferentFor multi spindle automatic lathes, used and newPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw barManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rodManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com