accessories for machine tools used for sale (1,651)

Zeiss Prismo VAST Gold with rotary table Year of manufacture 1999 Retrofit Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Control C98 with control panel BP26_SE Roundtable VAST Gold probe Stylus Changing Magazine 13-Fold Stylus changer plate Pushbutton Accessories Calibration ball Technical documentation Other accessories Workstation with monitor Software Calypso Basic other options of your choice

Packing: 570270870 mmShipping weight: ca. 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ? mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: 400330300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: ? mmno. of flutes: ? groove width: ? mmtotal power requirement: 0 kWweight of the machine ca.: 220 kgdimensions of the machine ca.: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 1000 x 520 mmno. of flutes: 6 groove width: 16 mmweight of the machine ca.: 400 kgdimensions of the machine ca.: 1,20,80,8 mTurning, swivelling and tilting table ( universal table )suitable for FP- 2 L / 3 L / 3 LV / 41 / 426 T-slots 16 mm at 90 mm centres.Table top can be swivelled +- 45° ( or 180° ).Table top can be tilted 4 x 15°.Table load moving/stiff: 1000/1500 kg,Weight approx. 400 kgBearing frame and lifting beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8000 mm, 3000 mm

Large plate field with T-slots Clamping area 8,000 x 3,000 mm Thickness 350 mm. With 12 x T-slots. Total weight approx. 20 t

table diameter: - mmtable load: - ttable height: - mmControl: - total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mCNC Swivel Rotary Table/ CNC Dividing Apparatusincl. TailstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 400 mmtable load: 0,2 ttable height: hor. 200 / vert. Sph. 310 mmtotal power requirement: 0 kWweight of the machine ca.: 0,155 tdimensions of the machine ca.: 0,60,530,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). T ...

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Key data: 120 l/min, 12 W, 7

Text

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtr ...

The used coolant cleaning system based on centrifuge is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or clean oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Pump capacity of supply pump 1 (for process supply): up to 80 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtration system and is cleaned in the centrifuge. Stage 1: Filtration by a centrifuge, without consumables, th ...

surface area: 1200 x 600 ( x 500 ) mmno. of flutes: 9 groove width: 14 / x 62,5 mmtotal power requirement: 0 kWweight of the machine ca.: ? tPacking: Holzkiste 1400850700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 805 405 (x 340 ) mmno. of flutes: 8 groove width: 12 / x 45 mmtotal power requirement: 0 kWweight of the machine ca.: ? tdimensions of the machine ca.: ? mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible

feed pressure: 60 barliter capacity: 40 lpower capacity: 5,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,2 x 0,8 x 1,55 mNo. 4972Hydraulic Aggeregat 250 l / 60 bar / 40 l/minformerly HEYLIGENSTAEDT Heynumat 10Drive: 5,5approx. 300kg ( estimated )Transport dimensions approx. 1.2 x 0.8 x 1.55 m ( EUR exchange pallet )Dimension: 1200 x 750 x 1550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: max. 85 mmbar length: 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 400 mmtotal power requirement: kWweight of the machine ca.: 0,08 tdimensions of the machine ca.: m1 pc. faceplate - diameter 400 mmbore 125 mmfastening 4 screws: 185 M 10 KK 160 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 440 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m1 pc. faceplate - diameter 440 mmbore 60 mmfastening: 4 pcs. screws dia. 173 mm / M 16The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 315 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m1 pc. faceplate - diameter 315 mmbore 75 mmfastening: Camlock - 4 Pcs. 173 M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheels are available, they are still unused and originally packaged in a box. 1x Elbe abrasive media (MICROREX) Shape: 01 Straight Disc 104228/1 400,00x200,00x203,20 58AY 80/2 KL 8 V for: 35 m/s forcibly guided; 30 m/s walk-behind 3x Elbe abrasives (MICROREX) Shape: 01 Straight Disc 104228/2 400,00x140,00x203,20 58AY 80/2KL 8V for: 35 m/s forcibly guided; 30 m/s walk-behind 1x Control disc 140mm. Comet (Elbe) S33728 Shape:01 Straight Disc 250,00x140,00x127,00 A120 R13 8-974-51/18 1x Regulating disc 200mm. Comet (Elbe) S32848 Shape: 01 Straight Disc 250,00x200,00x127,00 A120 R13 6-055-24/18 1x WISSCO dressing tile AP23NAD 1x Lifting crane for grinding media

length: 610/710 mmwidth: 625 mmheight: 830 mmweight: ca. 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 10005002000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dia. of draw-in collets: 3 / 4 / 6 mmtaper diameter: 18 mmturning speeds: 40000 U/minpower requirement: Luft kWShipping weight: 5 kgPacking: 280160120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 110 / 160 ltank: ca. 130 ltotal power requirement: 0,25 kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 1,4 x 0,45 x 0,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 mm, 1500 mm, 380 V

For sale; Samsys bar loading magazine type Multisam 2000. The bar loading magazine is in good condition and can still be viewed under power. The maximum bar diameter is approx. 80 mm. The maximum rod length is 1500 mm. Including cable with Harting plug. For more information mailto chrismachinematch.nl

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.Tool trolley with 8 drawers, all with tools.- The pull-out drawers are all ball-bearing.- The entire workshop trolley is lockable.- The workshop trolley has 4 stable castors, 2 steerable andlockable.- The tools included are made of chrome vanadium steel.- The workshop trolley has 4 stable castors, 2 steerable, 2lockable, which ensure very comfortable rolling. On thetool trolley there is a stable worktop made of polypropyleneplastic.- The tools included in the workshop trolley are made of chrome vanadium steel andare stored in Styrofoam/foam inserts.+ Drawer 1:- 1/4 inch:13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mmRatchet, universal joint, extension.- 3/8 inch:10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mmRatchet, universal joint, extension.- 1/2 inch:17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mmRatchet, univers ...

Laser Cooling Unit Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a