beverage machines used for sale (2,098)

Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration:                        for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors

Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower  ...

Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) ...

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...

Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volu ...

Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 10,000 bottles per hour Formats: 1,0 l PET bottles 0,5 l PET bottles 0,33 l PET bottles Working direction: Clockwise Rinsing system: 36 rinsing nozzles 2 channel rinser With stainless steel pipes Filling system: Isobaric system 36 filling valves Capping system Manufacturer: Arol 9 capping heads With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps Dimension Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Rinser, filler, capper in triblock construction Vacuum barrier system Stain ...

Overview  This automatic crater was manufactured in 1996 by the German company Otto Fleischer. The Rota/1/E model is a single-head packing machine. It is still installed and immediately available. Technical data  Manufacturer: Otto Fleischer Type: Rota/1/E year of manufacture: 1996 Bottle formats processed: 0.7L (GDB) Operating pressure: approx. 6 bar Power supply: 380 V / 50 Hz / N / PE Connected load: approx. 4 kW Control voltage: 24 V

Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment

Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.  

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected

Overview This isobaric filling machine was manufactured in 2020 by Rizzolio. The machine is designed for bottle filling and is equipped with a double pre-evacuation system, making it suitable for products such as frizzante. It is currently stored and mounted on wheels for mobile use. No capper is included. The machine can be viewed in person at any time.  Technical data Capacity: approx. 550 bottles/hour (0.33 L, depending on operator) Formats: 0.33 L / 0.5 L / 0.75 L (general range approx. 0.3 L – 1.0 L) Application: Bottle filling Configuration: Filling system with double pre-evacuation, integrated product pump, 3×6 air pipes Bottle diameter: approx. 55 – 90 mm Adjustment: Stepless adjustment of bottle diameter and height

Overview This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data Manufacturer: Bohrer Maschinenbau Model / Type: R40 Machine Type: Crate washing machine Year of Manufacture: 2000 Origin: Regenstauf, Germany Application: Washing / cleaning of beverage crates Construction: ...

Overview  This bottle unpacker was manufactured in 1982 by German company Joha. The machine was part of a bottling line operating at 2,500 bph and is immediately available. Technical data Capacity: Part of a line running at 2,500 bph Formats: Prepared for 0.33 L Longneck Unpacking head: Packing head for 24 bottles in a modular crate

Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction

Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: Automatic valve opening/closing Centralized fill-level adjustment (±50 mm) Maintenance-free lifting cylinders Au ...

Overview This grape de-stemming and crushing machine type BETA160R was manufactured by VEMA/ITALCOM. With a capacity of 16 tons per hour, it is ideal for processing large quantities of grapes (especially green grapes). The machine has already been dismantled and stored and can be inspected on request. Technical details  Capacity: 16 tons/hour Power supply: 200V Rated power: 3.3 kW Weight: 320 kg

Overview  This cold glue labeller was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels using cold glue technology and is immediately available for sale. Technical data  Manufacturer: Gernep Model: Labetta 4/3/10 640 2A Year: 2008 Direction of rotation: Left-hand machine (bottle plate rotates counterclockwise) Nominal capacity: 14,000 bottles/hour Adjustable from 3,000 - 15,000 bottles/hour 2 cold glue units Label positions: Body, front, back Bottle formats: 0.5L NRW bottle 0.33L Vichy bottle 0.33L Ale bottle

Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...

Complete brewery - 2 units - 250l per brew - 1 brew per day possible - Year of construction 2017 - Manufacturer: Company Marican ́s Italy - Consisting of: 2 units brewhouse - lauter tun - wort cooler - fermentation and storage tanks - brewhouse technology complete. Optional: Manual drum washer, a grist mill, a bottle filler with back pressure and a capper for crown caps, stainless steel KEG from 10-50l Project: BRAU-KOMPLETT-MARICON ́S-250L-2GER

Fermentation tank 525 l pressureless, with cooling jacket and all fittings and thermometer - Speidel - Year of construction 2019 - Project: GÄRTANK -25- GTKASAU

Bottle washer with rinser function with additional cleaning basket and jack and 6 canisters of cleaning agent - Jemi - new generation built in 2022

Beverage cooler for 10 x 50 L KEG - Hefa - Type 4.2 - Temperature infinitely variable - Dimensions 2.2 m wide, 1.45 m high with unit, 1m deep - Year of construction 2021 - Project: BEVERAGE COOLER -25- MWWOBAU

Beverage cooler for 10 x 50 L KEG - Hefa - Type 4.2 - Temperature infinitely variable - Dimensions 2.2 m wide, 1.45 m high with unit, 1m deep - Year of construction 2021 - Project: BEVERAGE COOLER -25- MWWOBAU

Condition: used,Volume: 11,800,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Diameter inside: 2,080,Cylindrical height: 3,000,Total height: 4,450,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: No,Outlet: Flange DN100,Remarks: In 1 tank the cylinder is marbled on the outside,Last purpose: Winery,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No, Current Interferer: No,Floor Bearing: No,Current Interferer: No

Equipment: Heatable/coolable,Condition: used,Volume: 13,650,Design: rectangular,Base: feet,Number of feet: 7,Heating/cooling (filter bar): available,Temperature control inside: cooling plate,Total height: 2,780,Total width: 1,450,Total length: 4,400,Type plate: No,Outlet: DN40 DIN 11851,Remarks: 3 cooling plates inside the tank (1 x loose, see photos) 1 manhole approx. 340 x 440 mm in the front floor smaller dents in the top floor, last purpose: wine storage,material in contact with the product: V2A 1.4301 (AISI304),material temperature control system: V2A 1.4301 (AISI304),material feet: