beverage machines used for sale (1,753)

Brewing Kettle /Hot water tank 75HL Vertical cylindrical stainless steel External cladding and insulation finished in riveted stainless steel Mounted on 4 stainless steel legs with adjustable feet Working Capacity 75HL Vessel is fitted with a Lanemark gas burner Vessel is fitted with a wedge wire floor for whole flower hop retention. Previous owner devised a successful method for using pelletized hops utilising an upstand on the central outlet below the wedge wire floor. For more information and more available stock please visit us at - advancedbrewing.co.uk

Grist Hopper - Second Hand Stainless Steel Manufacture: APS Length Approx 2000mm Width Approx 2000mm 4" Flange Outlet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

75HL Vessel - Atmospheric Fermenting vessels Vertical Cylindrical with conical base Approx dimensions: Overall height 4850mm Overall diameter 2200mm Legs 1830mm Top Dish 450mm Working capacity 75HL Max Brim full capacity 100HL estimated Fittings inlet/outlet 2” RJT Vessels fitted with internal rotating sprayballs ,sample taps, ,racking point with racking arm and a central top manway entrance There are cooling jackets on the Cone and the side wall (single zone) Vessels are insulated and clad in riveted stainless steel The vessels have previously operated at up to 3 Bar. However there are no specification plates on the vessels and the design drawings are not available Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

GEA Homogeniser Last used in 2020 Full asset list and spares available upon request

Single head semi automated cask filling machine, that incorporates isinglass finings dosing. Manufacture : Microdat Model: CF55 Year of Manufacture: 2013 Single phase For more information and more available stock please visit us at - advancedbrewing.co.uk

Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk

Krones Spirit Filling Line Max Speed 18,000 BPH Suitable for 70cl, 75cl and 1 litre bottles Includes; Accummulator - Hartness Dynac - Dynac 6400 - 2004 Cap Feed Elevator - Gassner - Compact Feeder - 2005 Cap Feeder Elevator - Zalkin - Promach 400l - 2020 Cap Feed Elevator - Zalkin - FCT 1911 - 1998 Cartoner - Langenpac - HCC - 2004 Case Erector 1 - Krones - Variocart C-40 - 2004 Case Erector 2 - Krones - Variocart C-40 - 2004 Case Printer 1 - Marsh - Encore - 2007 Case Printer 2 - Marsh - Encore - 2007 Case Sealer - Krones - Variocol H-120 - 2004 Depallitiser - Krones - ABSCH.PRESS.URI1 - 2004 Deshrouder - MSK - MSK 800 - 2004 Divider - SFT Syncro Laner - VWS - 2004 Fill level inspection - Mapex - FLO - 2004 Capper 1 - Zalkin - T9/360 - 2004 Capper 2 - Zalkin - T9/360 - 2004 Capper 3 - Zalkin - T9/360 - 2004 Filler Bloc ...

Velo 40cm x 40cm Filter Frame with Pump Second Hand Manufacturer: Velo acciai Model Type: SF44NDF Serial No: 13789 For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Can filler Leibinger Type Canvasa Capacity: approx. 1.000 cph set up for standard cans - can type: 211 / 202 without can table with Siemens S 7 control system Counter pressure filling technology O2 Pickup: 10-60 ppb The machine has the footprint of a standard Euro pallet. The Canvas is a compact, semi-automatic can filling machine. Suitable for carbonated and still drinks. The filler is still in production in a brewery until July 2026 and can be inspected during production.

Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7 

- With chassis - Belt length, between axles: 6'500mm - Belt width : 300mm - Motor: 400V, 50Hz - With large inlet hopper attachment - Dumping height : approx. 1200mm - Hopper width: 1000mm - With rack and pinion winch - In good condition

- With lens membrane - With closed press basket - Machine overhauled Technical data : Press basket capacity: 6hl Whole bunch capacity: 420 kg Quantity of crushed grapes: 1200-1800 kg Fermented grape capacity: 1800-2400 kg Total installed power: 1.47 kW Dimensions: Length: 1870 mm Width: 1140 mm Height: 1470 mm

8-fold cartridge filter housing with new filter elements on request for an extra charge

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

Some plant components from a bottle filling plant are available. 1) Indexed rotary bottle capper Kematec MBK 1 AR. 2) Belt station Cornelis Costamat-PP-1. 3) End-of-line packaging machines Normpack. An on-site inspection is possible. The offer is not a complete line, but plant components that have been decommissioned.

6 pneumatic valves 22 mm diameter

GRACO pneumatic pump used in a pharmaceutical factory, LPM: 9.5, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI, MOC: 2.5, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , MPa: 1.2, Max Flow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO , bar: 12, PSI: 180, Max air WPR: 1.2 MPa / 12 bar / 180 PSI, MaxFlow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO

GRACO pneumatic pump ATEX, Maxflow: 9.5 L/min / 2.5 GPM / 5:1 RATIO, Max flow: 9.5 L/min / 2.5 GPM / 5:1 RATIO , Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max air WPR: 1.2 MPa / 12 bar / 180 PSI , Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI

- Filter area: 2.5m2 - Year of construction: 2001 - Vacuum pump in DIN 1.4404 - Incl. mixing tank with agitator. - With equipment for residual filtration - Flow rate (mucus): 450-500 l/h Dimensions: - Depth: 1400 mm - Length: 2100 mm - Height: 1900 mm - Machine with very few operating hours - Machine in perfect condition

(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps

with 200 mm adhesive height Running direction: left - right Frequency-controlled

Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.

Running direction: left - right with safety cladding Capacity: 1,500 - 7,000 bph including glue pump Top condition