beverage machines used for sale (2,111)

An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.

Filler SEN Combi RE with124 filling station blocked with 20head Zalkin screw capper Capacity: 19.900 bph by 1,5 ltr. PET bottles Year of manufacturing: 1991 Isobaric filling system Bottle formats: 1,5 ltr. PET and 0,5 ltr. PET Work direction: left-right The machine is suitable to fill carbonated soft drinks. incl. cap feeding system: Gassner The machine is out of production but still connected.

Blow molding machine Kosme model: KSB 6R with 6 cavities year of manufacturing: 2017 neck size: PCO 1881 capacity: 12.000 bph container size: max. 3,0 ltr. including preform feeding system including chiller without blowing moulds already dismantled at the end of January 2026

FRAMAX CIP SET Portable CIP Set - Second Hand Type FRAMAX 0500X2 Manufactured: 2019 Two x 500 litres approx. tanks. The machine requires a supply of Steam and compressed air plus three phase power : INSTALLED POWER 2 KW POWER SUPPLY 400 VAC 50HZ+PH+N+E AIR PRESSURE BAR 8/10 HEATING STEAM PRESSURE BAR 2.5 WATER PRESSURE BAR 2.5/3.5 UTILITY CONNECTIONS WATER 3/4” M PNEUMATIC AIR 3/8” F STEAM 1/2” F CIP DELIVERY DN 40 F CIP RETURN DN 40 F DRAIN DN 40 F Machine Dimensions : LENGTH 1200 WIDTH 1600 HEIGHT 2150 WEIGHT 350 Kg For more information and more available stock please visit us at - advancedbrewing.co.uk

Schneider Pump- Second Hand 3 Phase Pump 1.5" RJTM Fittings Year of Manufacture: 2017 For more information and more available stock please visit us at - advancedbrewing.co.uk

75HL Vessel - Atmospheric Fermenting vessels Vertical Cylindrical with conical base Approx dimensions: Overall height 4850mm Overall diameter 2200mm Legs 1830mm Top Dish 450mm Working capacity 75HL Max Brim full capacity 100HL estimated Fittings inlet/outlet 2” RJT Vessels fitted with internal rotating sprayballs ,sample taps, ,racking point with racking arm and a central top manway entrance There are cooling jackets on the Cone and the side wall (single zone) Vessels are insulated and clad in riveted stainless steel The vessels have previously operated at up to 3 Bar. However there are no specification plates on the vessels and the design drawings are not available Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Single head semi automated cask filling machine, that incorporates isinglass finings dosing. Manufacture : Microdat Model: CF55 Year of Manufacture: 2013 Single phase For more information and more available stock please visit us at - advancedbrewing.co.uk

Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk

Velo 40cm x 40cm Filter Frame with Pump Second Hand Manufacturer: Velo acciai Model Type: SF44NDF Serial No: 13789 For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Can filler Leibinger Type Canvasa Capacity: approx. 1.000 cph set up for standard cans - can type: 211 / 202 without can table with Siemens S 7 control system Counter pressure filling technology O2 Pickup: 10-60 ppb The machine has the footprint of a standard Euro pallet. The Canvas is a compact, semi-automatic can filling machine. Suitable for carbonated and still drinks. The filler is still in production in a brewery until July 2026 and can be inspected during production.

Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7 

8-fold cartridge filter housing with new filter elements on request for an extra charge

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

A Kematec MBK 1 AR clocked rotary bottle capper is available. On-site viewing is possible.

6 pneumatic valves, 22 mm in diameter

GRACO pneumatic pump used in a pharmaceutical factory, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , Max Flow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO , LPM: 9.5, MOC: 2.5, MPa: 1.2, bar: 12, PSI: 180, Max air WPR: 1.2 MPa / 12 bar / 180 PSI, MaxFlow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO

GRACO pneumatic pump, ATEX, Max flow: 9.5 L/min / 2.5 GPM / 5:1 RATIO , Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Maxflow: 9.5 L/min / 2.5 GPM / 5:1 RATIO, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , Max air WPR: 1.2 MPa / 12 bar / 180 PSI

(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps

with 200 mm adhesive height Running direction: left - right Frequency-controlled

Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.

Running direction: left - right with safety cladding Capacity: 1,500 - 7,000 bph including glue pump Top condition

PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...

On behalf of our client, we are selling this KHS Blomax 16 PET blow molding machine which is designed for the automated production of PET bottles. It ran together with 2x KHS Absofill / ABF 710 machines before (one of these 2 also sold by our , .hamburg-machinery/listings/7469327-used-aseptic-pet-bottle-filling-ma chine-khs-innosept-absofill-abf-710-03). It is dismantled ± 8 years ago and is stored since in a closed warehouse. The client bought the machine used and decided not to blow bottles themselve, but buy them from another supplier, already blown. This bottle blower is direct available. Loading on the truck / inside the container will be done by the dairy factory., The machine was used to blow PET bottle for a fruit juice factory in Germany. Capacity: 28.800 bottles/h. Bottle size: min. 200 ml and max. 2.000 ml. Current bottle neck nominal diameter: 38 mm. With the same nominal bo ...

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...