Veneer gluing machines BIESSE STREAM SB2 10.5

wood working machines / veneer machines / Veneer gluing machines

Manufacturer: BIESSE

Model:STREAM SB2 10.5

Type of machine: Veneer gluing machines

item-No.: 166441192

Quantity: 1

Date: 04.02.2025

Year of manufacture:

Location: Land-fr France 58000 Challuy NEVERS

Price: 98,000 EUR

Machine in stock:Yes

Seller-item-No.:c3086

Panel width: 240 mm to 1200 mm
Panel length: 240 mm to 3000 mm
Panel thickness: 10 mm to 60 mm
Edge thickness: 0.3 mm to 3 mm
Cleat spacing: 500 mm

ENTRY / OUTPUT:

Transfer by means of special chains with anti-wear and anti-stain rubber coated elements
Swivel and adjustable inlet guides according to panel protrusion
Closer device to ensure that the panel rests against the cleats on the upper presser
Entrance holding device optimises the introduction of panels of different widths

Longitudinal frames made of a single monolithic structure of high rigidity

FEED CHAIN:
The speed is infinitely adjustable from 10 to 40 m/min by INVERTER directly by numerical control
The stop cleats of the panels are in height that can be automatically selected by the CN and can assume the following positions: projection 12-18-23 mm from the chain plane

BELT PRESSER

APHONIC BOOTHS
All units equipped with rotary tools are arranged inside the cabins covered with sound-absorbing material
Internal lighting

NC placed at the machine inlet on the rack side

MILLING UNIT

With pneumatic time intervention used as splinter repellents for transverse shaping
Tool rotation speed: 6000 rpm
Motor power: 5.8 kw
Tool diameter: 200 mm

DUAL STACKED SHREDDERS

With simultaneous movement for panel projection adjustment and independent horizontal and vertical adjustment
Supporting structure is made of cast iron
Tool rotation speed: 6000 rpm
Motor power: 5.8 and 5.8 kw
Tool diameter: 205 to 250 mm

NUMERICAL CONTROL

Video interface
Positioning axis control
Chain feed speed adjustment
Presser height adjustment according to thickness
Edge exchanger management
Manufacturing list management
Automatic management of the edge magazine
Ignition of cascaded engines
Possibility of connection to barcode reader
Module NC410
12" Monitor

MACHINE EXTENSION TO 3200 mm

SUPPORT AUTO CENTER 10.5

The device is used to support parts that can bend in the center due to their dimensions and thickness.
Fully automatic lifting/activation

CHAIN CLEATS at 500 mm 10.5

SP3 GLUING UNIT

Straight edges in melamine resin, ABS, PVC, PP
Thermoplastic adhesives based on EVA
Independent Teflon interchangeable tank
Sensor for reading the adhesive level inside the tank
Rotational speed of the adhesive coating roller electronically synchronized with the feed speed of the chain
Patented pre-fusion device
Pellet container (8kg)
Edge Presence Testing Device
Possibility of exchanging edges automatically
Edge length 280 mm

6 POSITIONS FOR MOVING EDGE MAGAZINE

END CUT

End cutting unit for edge thicknesses up to 3 mm
Device for fast distance when running
Automatic exclusion from the stopped engine unit
Speed: 12000 rpm
Panel projection: 35 mm
Edge thickness: 0.3 to 3 mm
Panel thickness: 10 to 60 mm
Interval between 2 consecutive panels: 350 mm

WHOLESALE OUTCROP GROUP

2 stacked horizontal-axis motors
Automatic pneumatic exclusion of the unit
Speed: 12000 rpm
Motor power: 1.3 + 1.3 kw
Panel thickness: 10 to 60 mm
Tool diameter: 80 mm

CORNER FLUSH UNIT

The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops
The in-line stops are selected automatically by the control
Use on the MULTIPROFILE tool group to change profile/template without replacing the tool
The tools are equipped with 20° chamfer and 1.5-2-3 mm radius
Speed: 12000 rpm
Motor power: 0.65 + 0.65 kw
Panel thickness: 10 to 60 mm

UPPER/LOWER ROUNDER

Rounding copier for the upper and lower stops of the panel with oscillating motion for the continuation of the panel
Quick stall system for power carrier units
Automatic exclusion of the tool with stopped motors
Tool rotation speed: 12000 K5658589 rpm
Motor power: 0.3 kw
Edge thickness: 0.3 to 3 mm
Radius with concave profile: 40 mm
Minimum distance between the tail of one panel and the head of the next (at 20m/min): 500 mm

UNIVERSAL MILLING MACHINE

For the execution of profiles, grooves and rebates on the edge and on the panel plane with pneumatic intervention
Motor tilts from 0 to 90° manually
Automatic group exclusion from command panel
Speed: 12000 rpm
Engine power: 5 kw
Tool diameter: 125 mm

UNIVERSAL DOUBLE MILLING MACHINE

For the execution of grooves and rebates on the edge and on the panel plane with pneumatic intervention
The upper motor can be manually rotated from 0 to 90°
The lower motor is fixed horizontal
Automatic exclusion of groups from the order board
Speed: 12000 rpm
Motor power: 5+5 kw
Tool diameter: 125 mm

VOCAL SCRAPER GROUP

For finishing thick ABS/PVC/PP edges with radiated tools and horizontal and vertical copiers
Equipped with nebulizer for cleaning the tool
Automatic exclusion from command panel
Tool radius: 1 to 5 mm

EDGE WARMER

Allows the edge of the panel to be warmed during the passage of the panel to reactivate the original colour when using PVC materials

GLUE SCRAPER UNIT

EDGE-CONTROL DEVICE

Electronic-mechanical device for edge length control by means of shear at 40m/min

Minimum length of the edge to be applied: 350 mm

SB NARROW WORKPIECE BAR

Mini panel width: 35 mm

KIT FOR NARROW PARTS WITH THIN EDGES

It allows workpieces with a minimum width of 70 mm, only if the thin edge is applied
Mini panel length 400 mm

PREDISPOSITION FOR INSTALLATION OF PU GLUING KIT
Share this machine on Facebook:

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

Copy to you?

Save input data

Panel width: 240 mm to 1200 mm
Panel length: 240 mm to 3000 mm
Panel thickness: 10 mm to 60 mm
Edge thickness: 0.3 mm to 3 mm
Cleat spacing: 500 mm

ENTRY / OUTPUT:

Transfer by means of special chains with anti-wear and anti-stain rubber coated elements
Swivel and adjustable inlet guides according to panel protrusion
Closer device to ensure that the panel rests against the cleats on the upper presser
Entrance holding device optimises the introduction of panels of different widths

Longitudinal frames made of a single monolithic structure of high rigidity

FEED CHAIN:
The speed is infinitely adjustable from 10 to 40 m/min by INVERTER directly by numerical control
The stop cleats of the panels are in height that can be automatically selected by the CN and can assume the following positions: projection 12-18-23 mm from the chain plane

BELT PRESSER

APHONIC BOOTHS
All units equipped with rotary tools are arranged inside the cabins covered with sound-absorbing material
Internal lighting

NC placed at the machine inlet on the rack side

MILLING UNIT

With pneumatic time intervention used as splinter repellents for transverse shaping
Tool rotation speed: 6000 rpm
Motor power: 5.8 kw
Tool diameter: 200 mm

DUAL STACKED SHREDDERS

With simultaneous movement for panel projection adjustment and independent horizontal and vertical adjustment
Supporting structure is made of cast iron
Tool rotation speed: 6000 rpm
Motor power: 5.8 and 5.8 kw
Tool diameter: 205 to 250 mm

NUMERICAL CONTROL

Video interface
Positioning axis control
Chain feed speed adjustment
Presser height adjustment according to thickness
Edge exchanger management
Manufacturing list management
Automatic management of the edge magazine
Ignition of cascaded engines
Possibility of connection to barcode reader
Module NC410
12" Monitor

MACHINE EXTENSION TO 3200 mm

SUPPORT AUTO CENTER 10.5

The device is used to support parts that can bend in the center due to their dimensions and thickness.
Fully automatic lifting/activation

CHAIN CLEATS at 500 mm 10.5

SP3 GLUING UNIT

Straight edges in melamine resin, ABS, PVC, PP
Thermoplastic adhesives based on EVA
Independent Teflon interchangeable tank
Sensor for reading the adhesive level inside the tank
Rotational speed of the adhesive coating roller electronically synchronized with the feed speed of the chain
Patented pre-fusion device
Pellet container (8kg)
Edge Presence Testing Device
Possibility of exchanging edges automatically
Edge length 280 mm

6 POSITIONS FOR MOVING EDGE MAGAZINE

END CUT

End cutting unit for edge thicknesses up to 3 mm
Device for fast distance when running
Automatic exclusion from the stopped engine unit
Speed: 12000 rpm
Panel projection: 35 mm
Edge thickness: 0.3 to 3 mm
Panel thickness: 10 to 60 mm
Interval between 2 consecutive panels: 350 mm

WHOLESALE OUTCROP GROUP

2 stacked horizontal-axis motors
Automatic pneumatic exclusion of the unit
Speed: 12000 rpm
Motor power: 1.3 + 1.3 kw
Panel thickness: 10 to 60 mm
Tool diameter: 80 mm

CORNER FLUSH UNIT

The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops
The in-line stops are selected automatically by the control
Use on the MULTIPROFILE tool group to change profile/template without replacing the tool
The tools are equipped with 20° chamfer and 1.5-2-3 mm radius
Speed: 12000 rpm
Motor power: 0.65 + 0.65 kw
Panel thickness: 10 to 60 mm

UPPER/LOWER ROUNDER

Rounding copier for the upper and lower stops of the panel with oscillating motion for the continuation of the panel
Quick stall system for power carrier units
Automatic exclusion of the tool with stopped motors
Tool rotation speed: 12000 K5658589 rpm
Motor power: K5658589 0.3 kw
Edge thickness: 0.3 to 3 mm
Radius with concave profile: 40 mm
Minimum distance between the tail of one panel and the head of the next (at 20m/min): 500 mm

UNIVERSAL MILLING MACHINE

For the execution of profiles, grooves and rebates on the edge and on the panel plane with pneumatic intervention
Motor tilts from 0 to 90° manually
Automatic group exclusion from command panel
Speed: 12000 rpm
Engine power: 5 kw
Tool diameter: 125 mm

UNIVERSAL DOUBLE MILLING MACHINE

For the execution of grooves and rebates on the edge and on the panel plane with pneumatic intervention
The upper motor can be manually rotated from 0 to 90°
The lower motor is fixed horizontal
Automatic exclusion of groups from the order board
Speed: 12000 rpm
Motor power: 5+5 kw
Tool diameter: 125 mm

VOCAL SCRAPER GROUP

For finishing thick ABS/PVC/PP edges with radiated tools and horizontal and vertical copiers
Equipped with nebulizer for cleaning the tool
Automatic exclusion from command panel
Tool radius: 1 to 5 mm

EDGE WARMER

Allows the edge of the panel to be warmed during the passage of the panel to reactivate the original colour when using PVC materials

GLUE SCRAPER UNIT

EDGE-CONTROL DEVICE

Electronic-mechanical device for edge length control by means of shear at 40m/min

Minimum length of the edge to be applied: 350 mm

SB NARROW WORKPIECE BAR

Mini panel width: 35 mm

KIT FOR NARROW PARTS WITH THIN EDGES

It allows workpieces with a minimum width of 70 mm, only if the thin edge is applied
Mini panel length 400 mm

PREDISPOSITION FOR INSTALLATION OF PU GLUING KIT
seller offer No. resale c3086
Share this machine on Facebook:
approved
dealer

Seller

KAZI-TANI S.A.S.

Mr Marius Durnescu
58000 Challuy NEVERS
France

RESALE member since 2023

  • machine list (86)

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

(to all dealers for such a machine)

Copy to you?

(copy of your inquiry will be sent to your email address)

Save input data

(Save input data for further inquiries)

add to watchlist

more Biesse STREAM SB2 10.5 + similar Biesse-Model

2005 BIESSEStream B1 S3
2009 BIESSESKIPPER 100
BIESSESKIPPER 100
2007 BIESSESkipper 100
2005 BIESSESkipper 100
2008 BIESSESelco EB 108
BIESSESKIPPER 100 44000 EUR

Price: sold Biesse STREAM SB2 10.5 + similar Biesse-Model

2017 BIESSEStream B1 10.5 + Nordson Syste 125000 EUR [Nov 2021]
2005 BIESSEStream B1 S3 40000 USD [Dec 2014]
BIESSESTREAM B1 10.5 SOFT 40000 EUR [Jan 2017]
BIESSESkipper 100 55000 EUR [Dec 2016]
BIESSESKIPPER 100 44000 EUR [Jan 2022]