Gantry milling machines FOREST LINé Minumac 2400 Linear

HIGH SPEED 5 Axis Gantry Milling Machine (Overhead Gantry) with Linear Drive Motors :
2-axis NC milling head and high-speed spindles

Table size (panel panel): 3,000 x 6,500 mm
Table load: max. 5,000 kg/m²
Distance between uprights: 4,500 mm

2-axis NC universal milling head:
Head rotation axis: C-axis +/- 360°
Head swivel axis (pan): B-axis +/- 110° (220°)
Torque B-axis : max. 800 Nm
C-axis torque: max. 1,000 Nm
B-axis holding torque: max. 3,000 Nm
Holding torque C-axis: max. 3,000 Nm

Working distances (linear drive motors):
Top Gantry Longitudinal Travel: X 6,800 mm
For separate working areas: X1/X2 2,250/2,250 mm
Milling slide transverse travel: Y 3,500 mm
Vertical travel milling slide: Z 2,000 mm

Cutting feeds: X/Y 60,000 mm/min. / Z 40,000 mm/min. / B/C 0 - 10 rpm.

Rapid traverses: X/Y 60,000 mm/min. / Z 40,000 mm/min. / B/C 10 rpm.

Spindle I - Electrospindle: FISCHER MFWAS-2603-18/1 WVCS
Spindle drive power: S1 20 kW
Spindle speeds up to: max. 18,000 rpm.
Spindle torque: max. 120 Nm
Spindle holder: HSK-A63

Spindle II - Electrospindle: FISCHER MFWAS-2307-24/1 WVCS
Spindle drive power: S1 40 kW
Spindle speeds up to: max. 24,000 rpm
Spindle torque: max. 56 Nm
Spindle holder: HSK-A63

Tool magazine and autom. Tool changer ATC:
2 x tool magazines: 1 for each work area:
Tool holder: HSK-A63
Tool magazine positions: 20-fold (2 x 20)
Tool diameter: max. 80 mm
Tool length: max. 250 mm
Tool weight: max. 5 kg

High Gantry Milling Machine / Top Gantry Milling Machine (Overhead Gantry).
Simultaneous 5-axis machining with 2-axis NC universal milling head.
Machining in one work area OR in two separate work areas, for simultaneous machining and loading and unloading of workpieces as well as pendulum machining.
High speed with linear motor drives.
High precision.
Heidenhain linear scales X,Y,Z axes.
Heidenhain encoder B,C axes.
2 x interchangeable high-speed spindles.
Spindle replacement is semi-automatic. Only the four retaining bolts have to be operated manually.
2 x 20-cavity tool magazines and automatic tool changer. ATC 1 is intended for the entire machining hub. ATC 2 is used in the D5615974 second workspace when the D5615974 separate workspace is used.
Dcj Ugswa R Sdj Adw Hof
Tool measurement, length and diameter as well as tool breakage detection with BLUM laser measuring system. One device per work area.
Workpiece measurement with Renishaw RPM 60 probe.
Work area monitoring by color camera with motorized zoom lens.
Full fairing.
Telescopic roof in front of and behind the crossbeam to seal off the work area. The roof can be opened for workpiece loading by crane.
2 x chip conveyors with a useful length of 6,800 mm (X-axis).
1 x lifting conveyor at the end of the X-axis.

Said to be in excellent condition.

Operating Hours - ONLY 2800 !
Spindle hours - ONLY 1800 !

Note: The side stands are made of steel and filled with concrete. These are not reused. When moving, the concrete studs must be re-poured when the foundation is created. The drawings are available. The manufacturer offers advice and support.

seller offer No. resale V(F)-7038