grinding machines wood used for sale (671)

SPECIFICATIONS: A. Grinding unit with 3 rollers Reel 1 - 85 Shore Reel 2 - 65 shore Reel 3 - 55 shore Max. grinding width mm: 1350 Max. working thickness mm: 170 Diameter of the rollers mm: 250 Extraction system KW 5.5 Sanding belt mm: 1370 x 2620 B. Brush unit with 4 units Unit 1 - transverse, counter-rotating bogies Aggregates 2 and 3 - Longitudinal brushes Unit 4 - counter-rotating bogies Hydra V - PAD electronic control Equipped with 5 motorized Mahros conveyors width mm 1350 for workpiece selection and return

Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

grinding length: 1.000 mmgrinding width: 600 mmworkpiece height: 400 mmControl: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mmtravel cross (z-axis): 540 mmdistance table surface - grinding spindle centre: max. 600 mmTravel vertical (Y-axis): 500 mmMax. working height on new grinding wheel: 400 mmworkpiece table: : Electro permanent magnetic plate: 800 x 500 mmpole pitch: 18 mmclamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/minElectromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mmmeasuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mmElectromechanic ...

Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg

Key data: 1100 mm, 2

Wide belt grinding machine Manufacturer: Böttcher & Gessner Model: 780 Grinding width 1100mm Aggregates 1x calibration roller 1 x Finishing touches 1 x Cleaning Brush

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73

SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Cross sander for Comec chair components 5.5kw main motor Sanding belt width 100mm Extraction nozzle 110mm Dimensions of the machine 233x60x140cm

SPECIFICATIONS: Aggregates: 04 1 fixed unit 3 more swivelling/oscillating units Max. machining thickness mm: 100 Grinding speed adjustable Installed capacity KW: 15.0 Conveyor belt width mm: 250 Pneumatic adjustment Upper pushers arranged on 2 rubberized rails Side bracket for wide workpieces

Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified

Working width: 1350 mmNumber of sanding units: 1 st.Workpiece thickness max.: 160 mmsanding belt measurements: 1370 x 2150 mmFeed motor: 0,75 PSUnitek wide belt sander Excel LC 1350 1N KRT---------------------------1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOEFOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING- Usable WORKING WIDTH mm 1350- GRINDING BELT LENGTH mm 1370 X 2150- MAX. WORKPIECE THICKNESS mm 160- Steel CALIBRATION ROLLER mm 180- GRINDING SHOE WIDTH mm 50- BAND MOTOR POWER HP 15- BELT SPEED m/s 18- FEED MOTOR POWER HP 0.75- Adjustment gear feed carpet with infinitely adjustable speed m/min 4/20- HEIGHT ADJUSTMENT MOTOR HP 0.33- Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM”- 1 PC. DRUM BRAKE for belt braking- Swivel ROLLER for belt tension- 2 pcs. PRESSURE ROLLERS, with rubber coating- EMERGENCY STOP SWITCH EDGE in the inlet- ELECTRONIC DISPLAY of workpiece thickness-  ...

Working width: 950 mmNumber of sanding units: 1 st.Workpiece thickness max.: 160 mmsanding belt measurements: 970 x 2150 mmFeed motor: 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mmNumber of sanding units: 2 st.Workpiece thickness max.: 160 mmsanding belt measurements: 1370 x 2150 mmFeed motor: 0,75 PSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mmNumber of sanding units: 2 st.Workpiece thickness max.: 160 mmsanding belt measurements: 1370 x 2150 mmFeed motor: 0,75 PSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CALIBRATING SANDING machine SANDINGMASTER SCSB2-900 second hand machine max. working width mm.900 composed by n.2 belts ( 2 separate motors ): 1° belt . calibrating roller in rubber diam.mm.260 . motor power Hp 15 2° belt . pneumatic pad . motor power Hp 10 belt dimension mm. 1900 x 920 volt. 380/50 weigth kgs. 2000

Long belt sander Hunziker (Ref. No. 517-2697) Format: 2.5 x 1.2 m L x W x H: 5.0 x 2.0 x 1.7 m Weight approx. 480 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional  ...

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet  ...

Key data: 1350 mm, 3

SPECIFICATIONS: Working width mm: 1350 Sanding belt dimensions mm: 2620 x 1300 Configuration: I. Iron roller diameter 300 mm II. Hard rubber roller diameter 300 mm - hardness 80 shore III. Scotch Brite Brush Unit 02 Motors + power regulator KW 30 / KW 22 / KW 2,2 Complete with motorized conveyor belt mm: 3500 x 1300

grinding length: 1500 mmgrinding width: 900 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench belt sander Höfer Motor 4.2KW format 2.50 x 1.20 meters

Grinder for bucket seats with 2 air bellows

SPECIFICATIONS: 2 oscillating grinding units at the top - bottom Inclination 0° - 45° Adjustment option Lateral support for wide workpieces 80 mm guideway Max. working height mm: 100 Upper pushers with adjustable rubberized wheels

Profile grinding machine / strip grinding machine Manufacturer: DIMA Model: LPS /9 Year of construction: 1994 9 grinding units / disc grinding units

Key data: 1300 mm, 5

Wide belt snding machine Manufacturer: Heesmann Model: LSM 8 Equipment: - Transverse sanding unit - Longitudinal sanding unit - Longitudinal sanding unit - Brush unit - Brush unit