grinding machines used for sale (2,502)

grinding length: 450 mmgrinding width: 250 mmworkpiece height: 275 mmtable surface area: 550 x 200 mmdistance spindle center to table: max. 400 mmtable speeds: 0 - 30 m/mincross feed: 0 - 60 mm/Hubrapid traverse cross: 1,2 m/mingrinding wheel size: ø 250 x 30 x ø 51 mmgrinding spindle speed: 1400 / 2800 U/mintotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of machine L x W x H: 1,55 x 1,23 x 1,80 mAccessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 €: 1267.62 €: 800 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 810 mm: 5 - 25 m/min: 0.74 kW: 10 kVA kW: 3540 mm: 2080 mm: 2100 mm: 2900 kg: 980 mm: 350 kg: 355 x 50 x 127 mm: 0,001 mm: 500 - 1.800 U/min: 3,75 kW: 1.1 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted ...

Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible.

This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4 color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details.

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 €: 1660.74 €: 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working area1 grinding wheel2 grindi ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 €: 1581.36 €: 810 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 450 mm: 0 - 675 mm/min: 480 mm: 500 - 2200 1/min: 3,75 (optional 5,5 / 7,5) kW: 1.5 kW: 3250 mm: 3075 mm: 2250 mm: 2900 kg: 175 kg: 350 kg: 355 x 50 x 127 mm: 1,1 kWFully enclosed splash guard10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listautomatic vertical feedservo drive for grinding wheel feed and table cross feedheavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearingshardened and gr ...

The machine is ideal for tool and mould making, fixture construction and precise grinding work in mechanical engineering. Okamoto stands worldwide for the highest accuracy, reliability and excellent surface qualities. Technical data Manufacturer: Okamoto Type: ACC-84DX Table size: 850 × 400 mm Magnetic clamping plate: 800 × 400 mm Longitudinal travel (X): 950 mm Travel transverse (Y): 440 mm Distance table to grinding wheel: approx. 47.5 – 547.5 mm Maximum workpiece weight: 700 kg Grinding wheel size: Ø 355 × 38 × 127 mm Grinding wheel speed: 1,500 / 1,800 min⁻¹ Spindle motor: 3.7 / 4.0 kW Machine weight: approx. 4,000 kg Facilities Magnetic clamping plate Automatic grinding cycle Hydraulic table drive Integrated dresser Coolant device with belt filter Robust industrial design High grinding accuracy and surface quality Used, fully functional. The machi ...

HBM Drill Sharpener, Drill Grinder From 3 to 13 mm In just three simple steps, you can ensure that blunt, worn drills are extremely sharp again. The grindstone at the drill grinder consists of diamond and is therefore extremely hard. That way you always achieve the desired results quickly. You can be sure of a good result, especially with HSS drills. In this way, this device is perfect for use in industrial workshops. Furthermore, the sharpener is suitable for use on just about any type of drill. So it is a flexible tool. Auction-ID: A1-40896-345

work table 330x150 mm, including cooling unit, SCHNEIDER electrics Auction-ID: A1-48552-32

REISHAUER RZ 362 A – CNC Gear Grinding MachineYear of Manufacture: 2001Serial No.: 75523Max. Workpiece Diameter: approx. 360 mmMax. Module: 7Max. Gear Width: approx. 175 mmMax. Workpiece Weight: depending on configuration, approx. 60 kgGrinding Worm Diameter: approx. 270–350 mmHelix Angle: up to approx. ±45°CNC Control: ReishauerConnected Load according to Nameplate: 26 kVA

Key data: 40 mm, 150 mm, 150 mm

Used and refurbished centerless cylindrical grinding machine Palmary PC-12-SPS, year of manufacture 2017, 2025 mechanical and electrically overhauled with new SIEMENS S7 control system. Including coolant with paper tape filter, various support rulers, Newly painted. The machine is in mint condition. The machine does not have a fixed center. Machine has a CE mark, spare parts and training can be done by the salesman. Current delivery time approx. 10 weeks Grinding wheel: 305x150 mm, regulating disc 205x150 mm, regulating disc speed 10-100 (250) mm, rotational speed the SS 33 m/sec, grinding spindle drive 5.5 kW, weight 1.65 to, space requirement approx. 2.05 x 1.2 m

Mitutoyo Length Measurement Mod. KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the puller, including the air conditioning unit, Tip width: 630 mm, the machine has no tailstock and was specially used for forage work, max. grinding diameter: 280 mm, max. grinding wheel size: 400 x 40 x 127 mm, (none included), Speed of grinding spindle 2040 min-1, 6 speed levels of the tool spindle: 22.4 to 280 min-1, Drive motor 4 kW, Accuracy / Smallest part value: 0.001 mm, Taper in Riding and Tool Spindle Morse 4 Largest table length movement: 760 mm, Mass between tips 120 kg, Total power: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine Dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: correspond to production no.: 1989 - 1991 Swivelling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and autom ...

This 3-axis OKAMOTO ACC64 DX was manufactured in 2018. It features a table size of 650 × 440 mm and a maximum workpiece weight capacity of 420 kg. The grinding wheel size is Ø305 × 38 × Ø127 mm, with a speed of 1,800 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC64 DX surface grinding machine we have for sale. Contact us for further details.

Sanding belt width 75 mm Auction-ID: A1-49016-24

Auction-ID: A1-48745-21

Robotic grinding cell with a KAWASAKI RS50N robot was built in 2018 in Italy by DAN di De Antoni Srl. The system is designed for the automatic grinding of aluminium castings, door handles and other components that require a precise surface finish. The cell can also be adapted for polishing and other finishing processes. Grinding takes place within a closed work space using a specially designed grinding unit. It is equipped with two vertical grinding wheels and an intelligent pressure force system that automatically adjusts the pressure force during operation. This solution effectively removes surface irregularities and ensures repeatable machining results, which is particularly important in mass production. Any contamination generated during grinding is removed on an ongoing basis. The robotic grinding station is equipped with a KAWASAKI RS50N grinding robot with a payload of 50 kg ...

This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details.

General Description CNC profile and tool & cutter grinding machine manufactured by KELCH, model PFS 30-CNC. Designed for precision grinding of cutting tools, profiles and special tooling. The machine is equipped with CNC-controlled axes, a precision grinding spindle and a tilting workhead for versatile grinding applications. Technical Details Manufacturer: KELCH Model: PFS 30-CNC Machine type: CNC profile and tool & cutter grinding machine CNC-controlled axes Control: Bosch CNC Alpha with Bosch Alpha CRT Digital readouts: Heidenhain Control panel manufactured by Präzisionstechnik GmbH Tilting workhead Precision grinding spindle Precision workholding fixture Coolant enclosure Dust/coolant extraction system Condition Used industrial condition. The machine appears complete with Bosch CNC control, Heidenhain digital readouts, tilting workhead, precision grinding spindle, coolant e ...

Manufacturer: LIKO Model: ES2 Condition: Used Stock number: 9430 The grinder is in good condition.

Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible.

Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details.

This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.

Monzesi Rossi Monza 400 centerless grinding Grinding wheel 200 400, Special price, The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap., Grinding wheel width: 200

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Electric retrofit with inverter (regulating wheel) The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding ...

BUDERUS CNC 235 – CNC Grinding and Machining CenterMachining / Spindle2 machining areas / channelsMax. machining length: 150 mmMax. swing diameter: Ø 310 mmWorkpiece spindle speed: 0–3,000 rpmSpindle bore: Ø 45 mmWorkpiece spindle positioning via C-axisTable speed X/Z: 0–30 m/minMotor SpindleWMZ / DVSType: GS 205-045/17Year of manufacture: 2014AutomationAutomatic workpiece feed / conveyor systemCoolant / Filtration SystemLIQUI-Filter GmbHSystem: UR1060 / MW260 / Gamma 13Tank capacity: 2,400 lYear of manufacture: 2015Cooling SystemHYFRA gamma 13-F-SCooling capacity: 13 kW at 32 °CYear of manufacture: 2015Measuring TechnologyJENOPTIK post-process measuring technologyYear of manufacture: 2018Supply Data3 × 400 V / 50 HzInstalled power: approx. 45 kWCompressed air requirement: 15 Nm³/h at 5 bar

grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmgrinding wheel diameter: 500 x203,2 x 50-100 mmtotal power requirement: 12 KvAweight of the machine ca.: 4,7 tdimensions of the machine ca.: 3,3 x2,0 x 1,8 m- Includes belt filters - Includes grinding wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Junker Cylindrical Grinding Machine Type EJ 10 Year of manufacture 2005 Control Siemens Center width 150mm Axis height of the centering point 100mm Workpiece mass max. 5kg Grinding wheel diameter max. 400mm Grinding wheel width max. 63mm Bore of the grinding wheel JUNKER spindle collar 27mm The offer is aimed exclusively at tradespeople within the meaning of §14 BGB

Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.

Suitable for automatic lapping or re-toothing and chamfering of HSS and segmented circular saw blades as well as carbide circular saw blades in deep grinding using CBN or diamond grinding wheels., Accessories:, Option chamfering,, total enclosure,, coolant system,, automatic central lubrication,, electrostatic mist extractor (Heab EMZ 10-EL), automatic fire suppression system,, Machine light,, 2 grinding wheel holder,, 1 saw blade holder small (Ø36 mm),, 1 saw blade holder., Workspace : Diameter (20) 80 -560 mm, Tooth pitch: 1-25 mm, Number of teeth: 2 - 998, Circular saw blade thickness: up to 8 mm, Grinding wheel diameter: 200mm, Grinding wheel bore diameter: 32 mm, Connected load: 7 kW (400V / 50 Hz), Weight approx: 980 kg, Dimensions W x D x H =: 1568 x 1750 x 1995, colour: blue RAL 5014 / gray RAL 7035