grinding machines used for sale (2,401)

drill diameter: 2.0 - 20.0 mmlip angle: 90 - 135 °turning speeds: 4800 U/minvoltage: 230 Voltengine output: 0.12 kWweight: 8.6 kgrange L-W-H: 285 x 130 x 170 mmThe handy DG 20 M drill grinding machine is ideal for grindingtwist drills made of HSS, cobalt and hard metal. Thanks to the adjustabletip angle of 90° to 135°, this model can be used universally for2-edged twist drills.Properties:- For grinding HSS and hard metal twist drills from 2 - 20 mm- ER 20 and ER 25 collets also enable clamping of intermediate sizes- Optimum grinding result thanks to the specially guided collet- Includes device for sharpening the drill tip- Universally adjustable tip angle from 90° - 135°- Fast and easy grinding processScope of delivery:- CBN grinding wheel- ER 20 collets, 3 - 12 mm 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm)- ER 25 collets, 14 - 20 mm 7 pieces (14 / 15 / 16 / 17 / 18 ...

width of the strips: 150 mmband length: 2000 mmrevolutions per minute: 3000 U/minengine output: 4.0 kWweight: 93.0 kg including machine baseHigh-performance grinder for standard grindingapplications for extra wide workpieces.Furnishing:- High-performance belt sander with a stable machine base- Constant speed with high cutting performance thanks to the robust 4 kW motor- Very good price-performance ratio- Removable chip catcher- Patented strap tensioning system- Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: 15 + 30 m/seltube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 GradDust suction hood: 2 x 75.0 mmmotor speeds:: 1420 / 2660 Upm.face grinding attachment: 400 x 100 mmtotal power requirement: 2.5 / 3.3 kWweight of the machine ca.: 148 kg.range L-W-H: 750 x 1400 x 1200 mmFurnishing :- Constant belt tension through spring-loaded tensioning device- Standard with cylindrical grinding device- for grinding diameters of diam. 20-76 mm- Quick and easy setting of the desired grinding angle- Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt- Large plan grinding surface with protective cover- Slow belt speed (15 m / sec.)- ideal for grinding stainless steel and aluminum- User-friendly tape change, quick and uncomplicated- Quick and easy changing of the grinding rollers without tool ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...

width of the strips: 45.0 mmband length: 850 mmband speed: 8.0 m/sek.voltage: 230 Vtotal power requirement: 0.18 kW MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 250 mmgrinding wheel size: 250 x 25 x 20 mmturning speeds: 2850 U/minvoltage: 400 Vtotal power requirement: 2.0 kWweight of the machine ca.: 23.0 kg.dimensions of the machine ca.: 600 x 290 x 300 mmFurnishing:- Heavy design and high quality equipment- ideal for professional use- Ideal for matting, polishing- up to mirror-smooth surfaces of various materials- with the help of optionally available polishing discs and polishing pastes- Lockable ON-OFF switch according to IP54 with undervoltage release- Including motor with copper winding for a long service life- Standard with rubber feet for vibration-free work- Very smooth running thanks to balanced rotor with quality ball bearings- Elegant machine body made from high quality die-cast- Suitable for polishing metal, plastic and non-ferrous materialsScope of delivery:- Soft polishing pad- Hard polishing pad- Operating instruc ...

grinding width: 32.0 mmmax. dia. of grinding wheel: 250 mmgrinding wheel size: 250 x 32 x 32 mmturning speeds: 2850 U/minGrain size: K 36 / K 80 engine output: 1.5 kWvoltage: 400 Vweight: 30.0 kgrange L-W-H: 510 x 320 x 360 mmscope of delivery : - Grinding disc K 36- Finishing wheel K 80- Spark protection on both sides- workpiece supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt  ...

width of the strips: 50.0 mmband length: 940 mmband speed: 3.0 - 22 m/minturning speeds: 1450 U/mintube diameter: 16 - 114 mmradius: 180 °total power requirement: 4.75 kWweight of the machine ca.: 265 kgrange L-W-H: 1000 x 750 x 1300 mmFurnishing:- stationary pipe belt grinders- Automatic material feed with separate drive motor- Replacement sanding belts- Stepless speed adjustment- Manual adjustment of tube tension- Polish bent pipes up to 180 (angle).- Manual work possible without feed- CE mark / declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/secgrinding width: 75 x 430 mmengine output: 3.0 kWweight: 75.0 kg including machine baseFurnishing:- Powerful belt sander- modularly expandable, for the trade and for small series.- Can be expanded with additional modules- Speeds ideal for metalworking with 3000 / min- Height-adjustable surface grinding table for linear surface grinding- Removable chip catcher- Connection option for external suction- Working height individually adjustable- Patented strap tensioning system- Robust three-phase motor- Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3.0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mm- Machinevideo -https://www.youtube.com/watch?v=l-XFPai2BAAFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 300 mmband length: 2070 mmband speed: 7.0 m/secsurface of working table: 750 x 380 mmdiameter: 87.7 Führungsrollen mmengine output: 1.5 kWtotal power requirement: 400 Voltweight of the machine ca.: 88.0 kg.range L-W-H: 1050 x 600 x 400 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centerless grinding machine, ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel width: 200, Grinding wheel diameter: 400

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.

This 4-axis BLOHM Profimat MT 408 grinding machine was manufactured in 2001. It features a robust grinding spindle motor, PEA table, and efficient drives for the X-axis, Z-axis, and Y-axis. Grinding wheels are included, enhancing its readiness for immediate use. Consider the opportunity to buy this BLOHM Profimat MT 408 grinding machine. Contact us for more information about this machine.

Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulical ...

Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices

Gear grinding machine KAPP VAS 432

x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

This 3-axis ABA PSM 1250 TT was manufactured in 1992. It features a CNC rotary table with a diameter of 1250 mm and a Sinumerik 810G control system. The machine offers extensive X, Y, and Z-axis travels of 2000 mm, 600 mm, and 280 mm respectively, supporting complex grinding tasks. If you are looking to get high-quality grinding capabilities, consider the ABA PSM 1250 TT machine we have for sale. Contact us for more information about this machine.

Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm

This ACRA CHALLENGER ASG-1632HS was manufactured in 2006. It features a robust hydraulic surface grinder with a table surface of 800 x 400 mm and a maximum table weight of 400 kg. Equipped with a variable electro-magnetic demagnetizing table and a 2-axis SONY DRO for enhanced precision. Very good condition. Contact us for more information about this machine.