grinding machines used for sale (2,500)

grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2.25 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M1.5 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2,5 EW20° 5GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M1.5 EW20° 4GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2 EW15° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, No. of regulating wheel speeds: Infinitas, Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203.2 x 500mm, Grinding wheel width: 500 mm, Maximum length to be rectified in plongeé: 500 mm, Grinding wheel head motor power: 75 Kw, Total power: 90 Kw, Voltage: 220/380V, Long: 2.300 mm, Width: 2.800 mm, Tall: 2.100 mm, Weight: 15.000 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Hight: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 160mm, Ø min/max to be rectified: 1.5/75mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160mm, Grinding wheel width: 160 mm, Maximum length to be rectified in plongeé: 160 mm, Grinding wheel head motor power: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, Tall: 1.440 mm, Weight: 3.000 Kg

grinding length: 4200 mmgrinding width: 1300 mmworkpiece height: 550 mmControl: Siemens 840D passage width: 1300 mmelectro-magnetic table: 4200 x 1300 mmgrinding height: 550 mmgrinding motor: 306 kWgrinding motor turning speeds up to: 370 U/mingrinding motor feed, infinitely variable: 0,5-35 m/mincoolant flow rate: 2000 l/minweight of the machine ca.: 50 tdimensions of the machine ca.: 11,21 x 5,25 x 3,85 mEquipment / Accessories:- segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces- grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min steplessThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gr. grinding length: 300 mm large grinding width: 150 mm Table movement - longitudinal movement: 2 - 20 m/min Grinding wheel speeds: 3000 rpm electr. Power supply: 380 V, 1.1 kW Dimensions: 1500 x 1100 x 1750 mm Weight: 920 kg

COSMOS 1050 precision surface grinding machine, grinding area 1000 x 500 mm, grinding wheel 400 x 80 mm, magnetic clamping plate 1000 x 500 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take over the installation and training on site, as well as the subsequent service. For more information, please visit: long-grinding technology

Precision surface grinding machine, COSMOS 7040 SPS, grinding area 700 x 400, grinding wheel 300 x 50 mm, magnetic clamping plate 700 x 400 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take care of the installation and training on site, as well as the subsequent service.

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

grinding diameter: 250,350,450 mmgrinding length: 1000 mmcentre height: 125,175,225 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mAs the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentralschmierung und Rollen ...

Centerless cylindrical grinding machine KÖNIG & Bauer M130 MULTIMAT 130 Condition: very good, used Specifications Grinding wheel rotation speeds 35/45 (60) m/sec. Largest grinding diameter 35 mm Smallest grinding diameter 0.8 mm Maximum workpiece length for continuous grinding approx. 200 mm Maximum workpiece length for plunge grinding 130 mm The machine can be viewed by arrangement in our factory in Krefeld. – Errors, modifications and prior sale excepted –

Surface grinder BPH 320A/1000

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

width of the strips: 100 mmband length: 1250 mmband speed: m/sectube diameter: 16,5 - 90 mmangle adjustable from - to: 0 - 65 Gradconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,2 x 0,6 x 1,3 mipe grinding machine with 10 grinding rollers:16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mmPipe clamping area 90mmDocumentation (English)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: m/sectube diameter: 16,5 - 76 mmangle adjustable from - to: 0 - 65 Gradconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0,17 tdimensions of the machine ca.: 1,3 x 0,7 x 1,1 mipe grinding machine with 10 grinding rollers:16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mmPipe clamping area 90mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding lenght 6000 mm Grinding diameter 1050 mm

Height of points: 150 mm, Dot height: 150mm, Distance between points: 1000 mm, Grinding wheel dimensions (od x id x width): Ø400xØ127x50mm, Indoor head: 4 units, Internal grinding head: 4 units, Centre height: 150mm, Center Height: 150mm, Max. piece weight: 80Kg, Max. workpiece weight: 80Kg, X-axis travel (transverse): 350mm, X-axis speed: 10 meters per minute, Z-axis travel (longitudinal): 1000mm, Z-axis speed: 12 meters per minute, Z-axis resolution: 0.00004, B-axis swivel range: 210°, B-axis rotation range: 210 °, B-axis resolution: 0.0001°, Drive capacity: 10 HP, Grinding wheel diameter: 400mm, Max. width Grinding wheel width: 63mm, Max. Width Grinding Wheel Width: 63mm, Spindle speed range: 0-1000 RPM, Spindle swivel range: 0° - 90°, Head rotation range: 0° - 90°, Tailstock stroke: 30mm, Counterpoint race: 30mm, Equipped with: Fanuc 21i-TB CNC Control, Dimensions: 3350x ...

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

GENERAL CHARACTERISTICS, Max. grinding diameter 120 mm, Grinding wheel width 250 mm, Minimum Ø to be ground 1 mm, Ø drive grinding wheel 304 mm, Ø working wheel 508 mm, DIMENSIONS AND WEIGHT, Height 1,700 mm, Width 1,500 mm, Length 2,750 mm, Weight 4,000kg, ELECTRICAL CHARACTERISTICS, Grinding head motor power 15 Kw, Power motor power grinding head 1,8kw, Hydraulic motor power 1,1kw, Total power 20 kW, Voltage 220/380 V

Belt Grinding and Polishing Machine Löser SMG Specifications: • Power 2 x 4 kW • Speeds on both sides 3-stage 1400/1800/2200 rpm • Belt clamping arms for belt lengths up to 3,500 mm • Surface-mounted / free-standing extraction hoods for pane diameters 400 - 600 mm

Surface grinding machine STEFOR 8/5 RTB Year of manufacture 1985 Grinding wheel 400 x 127 2 grinding wheel holders Sanding paths 800x x 500 x 480 Weight 3700 kg Length 2.60 m Width 1.60 m Height 1.80 m