Thermo forming machines HIDROBRASIL PH4C 50T

# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm)

If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click:
HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices!

50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data:
- With a heating level
- Idle speed up to 10 mm/sec (adjustable via rotary control)
- Opening speed up to 40 mm/sec
- Starting pressing speed 8 mm/sec
- Table size/heating plate size 522 mm deep, x522mm wide
- Plunger size/heating plate size 498 mm deep, x498mm wide
- 2 heating plates, electrically heated, up to 200 degrees
- Oil temperature monitoring
- Circulating oil cooling on the hydraulics
- Pressure Holding Valve 0 to 3600 sec
- Pressure adjustment from 8 T to 50 T (50 T = 300 bar)
- Travel distance limitation optionally via pressure or position
- Two-handed operation, adjustable or permanently mounted
- Machine body double painted
- Signal light: Red: Alarm, Yellow: Back chamfer, Green: Ready
- Heating plates with electric heating rods, up to max. 200 degrees
- Construction, commissioning, instruction against separate calculation
# Technical data

Design
- Press design: Double column press

Thermally neutral
- Temperature range: 80 – 120 °C

Operating Pages
- Number of operating sides: 1 page

Forces
- Press force max.: 500 kN
- Free tearing force max.: 20 kN
- Print build-up time: Max. 3 sec. (closed tool steel on steel)

Dimensions
- Max. opening width: 600 mm
- Stroke and min. opening: 300/300 mm
- Table height above floor with heating plate: 900 mm
- Height above ground (construction height): approx. 2,500 mm
- Hall height: min. 3,500 mm
- Parallel deviation at 20°C: +/- 0.1 mm
- Deflection: < 0.2 mm/m (determined at max. clamping force with 70% occupancy)
- Total weight of the press without operating fluids: approx. 2.9 t
- Accessories: 2 heating plates (522x522 mm or 498x498 mm, max. heating capacity)
- Heating plates equipped with temperature sensors: up to 200 degrees

Speeds
- Quick-closing: 10 mm/sec.
- Pressing speed max.: 8 mm/sec.

Sound pressure
- Sound pressure level, measured at a height of 1.5m on the control panel according to DIN 45635-T16-KL3: max. 78 db(A)

Hydraulics
- Number of press cylinders: 1 pc.
- Operating pressure max.: 250 bar
- Print build-up time: Max. 3 sec.
- Pressure accuracy during the press stroke: +/- 5 bar
- Main pump: BOSCHREXROTH gear pump, approx. 26 L/min
- Oil volume: approx. 130 litres (HLP 46 MW)
- Ambient temperature: max. 40 °C
- Oil temperature: max. 55 °C
- Flow temperature: unspecified
- Automatic pressure adjustment after 5% pressure loss
- Constant pressure for up to 3600 sec

Electrics
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Connection to hydraulic main motor: 7.5 kW
- Total connection without heating plates: approx. 10 kW

Description of the heating press:

The HIDROBRASIL heating press with a pressing force of 50 tons and a table size of 600x600mm is specially designed for industrial applications. It is an oil-hydraulic double-column press, equipped with a sliding table mounted on spring-loaded rollers. This press is ideal for a wide variety of pressing processes, as it works precisely and reliably.

The press is equipped with high-quality heating plates that allow temperature control from 40 to 200 degrees. The heating plates can be adjusted via a keypad or optionally via a touchscreen control with recipe management.

Safety and comfort features:

- Lighting of the press room: Min. 1000 lux, heat-resistant design
- Automatic pressure adjustment: After 5% pressure loss, constant pressure for up to 3600 seconds
- Safety devices: Complies with the applicable safety regulations according to UVV as well as the standards and guidelines applicable to the EU

Electrics/Controls:

The control cabinet is connected to the press via vibration dampers and offers protection class IP 54 as well as approx. 20% reserve space for future expansions.

This heating press is ideal for companies looking for a reliable and versatile solution for their pressing needs. With its robust design and extensive safety features, it offers a high level of performance and safety.


Are you looking for a custom-fit machine?
Contact us for an H5651916 individual offer.

If H5651916 the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click:
Contact us for an individual offer
HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices!


# Compilation of technical specifications

- Total height: approx. 2,500 mm
- Table height above floor: 900 mm
- Installation height: unspecified
- Engine power: 7.5 kW
- Overall width: unspecified
- Total length: unspecified
- Radius: unspecified
- Press force: max. 500 kN
- Table width: 522 mm
- Table length: 522 mm
- Input power: approx. 10 kW (without heating plates)
- Operating speed: 8 mm/s
- Total weight: approx. 2.9 t
- Safety light barrier: unspecified
- Return speed: unspecified
- Width of ram plate: 498 mm
- Length of ram plate: 498 mm
- Plunger stroke: unspecified
- Distance table to ram: 600 mm
- Rapid traverse X-axis: unspecified
- Rapid traverse Y-axis: unspecified
- Rapid traverse Z-axis: unspecified
- Type of input current: 400 V AC
- DGUV tested to: unspecified
- Distance between stalls: unspecified
- Working height: unspecified
- Pressure phase: unspecified
- Cushion Stroke: unspecified
- Distance between columns: unspecified
- Retraction force: unspecified
- X-axis travel: unspecified
- Y-axis travel: unspecified
- Z-axis travel: unspecified
- Side stand passage: unspecified
- Lifting distance: unspecified
- Operating pressure: max. 250 bar
- Working range: unspecified
- Pressure: unspecified
- Diarrhea hole in the table: unspecified
- Oil tank capacity: approx. 130 litres
- Cabinet width: unspecified
- Input voltage: 400 V AC
- Cabinet height: unspecified
- Cabinet length: unspecified
- Passage width: unspecified
- Documentation/Manual: unspecified
- Retraction speed: unspecified
- Pressing speed: 8 mm/s
- Outer dimension width: unspecified
seller offer No. resale HB 2023-A-120-4