machines and plants for process engineering used for sale (7,656)

Pump with substructure and drive Flow rate min. 10 m³/h max. 70 m³/h Differential pressure min. 4.9 bar max. 0.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Stator Bolt Material: Galvanized Steel Geared Motor North, Type SK52-160LP/4-F(VL) TF F

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

High Pressure Pump HP-K-25-56 Volume:19.8 m³/h Pressure:10 MPa Stroke rate:435 1/min Oil volume:6 dm³

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

ID3599 Aquachem Automatic filter machine / Filterautomat AF 800 year/Baujahr 2020 Automatic filter machine, Filter volume: 154 dm3, filter area: 9.9 m2, filter plate format: 800 x 800 mm, number of chambers: 10, cake thickness: 32 mm, plate type: sealed chamber and membrane plates, feeding: up to 8 bar via the external inlet at the top, membrane repressing: pneumatic repressing system with internal air distribution and ramp-controlled pressure build-up (max. 15 bar), cake emptying system: AIRDIS cake emptying system and vibrating cylinder integrated in the filter plate handle, press locking: automatic, self-regulating electric/pneumatic/hydraulic locking system, drive: 0.75 kW, 400 V, 50 Hz, with control system, with connection and drain distributor, feeding unit (peristaltic pump), rinsing station, only in use for 1 year Automatic filter, filter volume: 154 dm3, filter area: 9.9 m2 ...

A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Process chiller / chiller air-cooled, Type: Phoenix PNG2 4302 HEX MTA S.p.A. The Phönix PNG2 4302 HEX are compact chilled water chillers that are suitable for outdoor installation. - Shell-and-tube evaporators, - Electronic Explosion Valves - Shut-off valves for compressors, - System with compressors and hydraulic soundproofing panels - Ambient temperature down to -20 °C - Storage tank and double P2 pump - Metal mesh protective filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 84 Available delivery pressure bar: 1.8 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1. Refrigeration Circuits (Quantity): 2 Compressors (quantity): 2 Power levels (%): 12.5 to 100 infinitely variable Electri ...

A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible.

Manufacturer: EXTRAKTLAB Model: e 140 Condition: Refurbished (2021) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2.5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance – UL 508A electrical panel Electrical – 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions – 99″ x 34″ x 72″ (LxWxH) Constru ...

Manufacturer: PRO-WAM Type of Machine : Process tank 450 L Year of Manufacture: 2019 Volume: 450 liters Tank used several times, like new, in very good condition, on wheels. Pressure up to 2 bar, with mixer and heating jacket, made of AISI 316Ti acid-resistant steel. Additionally, two UV light radiators were designed for the tank, mounted from the top through sight glasses. Process tank 450 l - vertical tank - pressure tank up to 2 bar - main tank made of AISI 316Ti acid-resistant steel - tank insulated with mineral wool, thickness 50 mm in the cylindrical part and on the lower head - outer jacket made of AISI 316Ti acid-resistant steel, thickness: 2mm - lower and upper cap pressed DIN 28011 - heating jacket with a capacity of 6 L - temperature in the tank and jacket 100 degrees. c - circulation pump - heating medium temperature sensor - expansion vessel of the heating system - el ...

We are offering for sale a complete XPS foam sheet extrusion and coating line, consisting of the following equipment: 1. Davis-Standard Extruder System Model 1: 100MM35 - HP Capacity: 257 HP - KW Capacity: 192 kW - Gear Ratio: 17.39 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 408,300 lb / 185,204 kg - Oil Fill: 23 liters (6 US gal), ISO VG 150 Model 2: 130MM45T - HP Capacity: 400 HP - KW Capacity: 298 kW - Gear Ratio: 17.49 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 690,000 lb / 313,000 kg - Oil Fill: 45 liters (12 US gal), ISO VG 150 S-Wrap Unit - Model: S-WRAP - Mfr Date: 08-2007 2. LEWA High-Pressure Metering Pump (x1) - Designed for Isobutane - Adjustable stroke head for low % addition - Triple heads LDD3 LEWA diaphragm metering pump - Digital flow meter for injection rate (kg/hr) - Pressure indicators at pump inlet & outlet 3. Dosing  ...

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: URT Type of Machine : Assembly Table Year of Manufacture: 2018 Certification: CE Marked Find more here - / Contact us at -

Manufacture: URT Year of Manufacture: 2018 Model: Testing Station Steering Wheel AMG Certification: CE Marked Find more here - / Contact us at -

Manufacturer: URT Model: Steering Wheel Test Station AMG Year of Manufacture: 2019 Electrical Connection: 230V, 50Hz, 20A, 1/N/PE (EU) Pneumatic Pressure: 5 bar Weight: 800 kg Find more here - / Contact us at -

Manufacturer:HORO Model:2736.AL-BCL Year of Manufacture: 2013 Type of Machine : drying oven Max Operating Temperature: 120°C Voltage: 3N~400 PE Frequency: 50 Hz Current: 18.1 A Power: 12.5 kW Find more here - / Contact us at -

Manufacturer: SOFTAL Model: AT 9104.00 Year of Manufacture: 2024 Type of Machine : Corona surface treatment machine It has status of an unfinished machine, requires integration with other equipment Generator Type / Model: 9030 Order Number: A24–S–00074 Serial Number: 0903024061 Mains Voltage: 400 V Frequency: 50/60 Hz Power Consumption: 7 kVA Current: 10 A Find more here - / Contact us at -

SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar More items - new and used - can be found in our shop! International shipping costs on request!

Stock # U2457-1 Used vibrating screen by Allgaier (D) model D1200. Contact parts stainless steel. Screen has working diameter 1200 mm. Single deck and cleaning deck with rubber balls. Feeding inlet has diameter 300 mm. Side wall outlet has connection 150 mm. Central discharge of final product has diameter 300 mm. Screen is driven by two vibrating motors, each: 1 kW, 980 rpm, 220/380 V, 50 Hz. Includes one screen mounted on machine and 5 additional stainless steel screens. Mounted on 4 lugs.

Venti Oelde High Performance Centrifugal Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High Performance Centrifugal Fan V: 2559 m³/h 12 bar t: 300 C P: 0.608 kg/m³ Pw: 0.9 kW NV: 2840 1/min Weight: 180 kg Year of Make: 2017 More items - new and used - can be found in our shop! International shipping costs on request!

Fluid Bed Dryer Type: DCRVF1200x7 Rationale: The material to be dried is placed on the inflow floor and fed there from bottom to top with the Drying air flows through. As a result, the good is heated with constant vibration and the moisture driven out. The vibration prevents the formation of bubbles in the fluidized bed of fine-grained products as well as the Segregation for products with a broad grain spectrum. The vibration also loosens up coarse grains and an almost complete emptying of the entire body. The dwell time of the product can be reduced by adjustment of the vibration. Specifications: Dryer width: 1200 mm Overall length: 7.0 m Length of the dry zone: 4.25 m Length of the cooling zone 2.75 m Tilt: horizontal Execution: · Air flow trough in welded steel construction with the necessary inlet and outlet openings · Exhaust hood with expansion zone, the necess ...