We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
used
Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.
new
Process cooling tower, air-cooled, Type: Cooling tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD are compact water cooling towers that are suitable for outdoor installation. Including pump, water treatment for biocide and stabilizer and control and control cabinet. Cooling capacity kW 1113 Cold water temp. Exit/ Entry °C: 27 / 32 Volume flow m³/h: 192 Available Pump Pressure Bar: 3.27 Wet bulb temperature °C: 21, Air volume m³/h: 97200 Sound pressure in 10m free field dB(A): 64 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. current consumption (A) 125 Max. power consumption (kW) 86.6 Dimensions: Length mm 6600, width mm 2424, height mm 3180, Weight transport / operation kg: 4194 / 8449 Connection DN 150 FROM 9038 Year of construction 2020 Condition: Optical 1, Technical OK Test facility, as good as new Price: on reque ...
used
Used plastic agglomerator, model GHX 300. New: 2021. Technical data: - Capacity 300 liters, - Recommended feed 200 liters, - Efficiency 220 kg/h (PE / PP PET / PA films), - Automatic or manual water supply, - 75 KW engine, - Installed set of six sets of fixed knives, - Rotating arm with double-sided knives, - Knife material 9 CrSi, - Pneumatic agglomerate discharge with the possibility of setting in automatic or manual mode, - Good condition / Used for only one year.
used
used
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Y ...
used
Stainless steel tanks Capacity 250 litres Cylindrical stainless steel tank standing on feet single-walled, hinged lid Agitator from above
used
2020 Viscotec Semi-automatic syringe filling system for dronabinol. The filling system is equipped with a storage container for heating the dronabinol to 60 – 70° C and keeping the Temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g. argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35ml / U) amounts 1%. The repeat accuracy is > 99%, depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dosing time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0 ...
used
1 tank for storing process water for e.g. supplementing a CIP system Capacity 300,000 l, insulated, with poured concrete floor Manhole and agitator at the bottom of the side with handrail at the top and ventilation hood at the top D = 4.14 m, length approx. 14 m Dismantled filed in the dairy farm
used
The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.
used
Used hermetic, self-cleaning centrifuge made by REDA, model: RE150T, capacity: 15.000 liters / hour, new: 1998 Centrifuge serviced. Last service on February 16, 2022.
used
Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 314. Capacity: 15.000 liters / hour.
used
Dissolver Agitator Vollrath EWVWSV-7 Explosion-proof design Power 4.6 kW with stirring rod Speed range 300-1200 1/min mobile, mobile on castors Very good condition, straight from production
used
Stirring tank REITZ RB300LRW037250 Stainless steel tank 300 liters with agitator 0.37 KW, used gear motor KEB 30 rpm. Stainless steel stirring tank 300 liters with outlet tap 3/4-inch. Diameter 630 mm, container height 990 mm. Tripod height 425 mm. Gear motor: Used gear motor KEB, 3 x 230/400 volts, 0.37 kW, n1 = 1350 rpm, n2 = approx. 30 rpm. With motor protection switch. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301. With rigid coupling 28/20 in stainless steel 1.4571. Stirring organ: Four-bladed inclined blade stirrer, diameter 275 mm, material stainless steel 1.4571. Very slow-running, high-torque agitator.
used
Used, copper coating pan made by Spomasz Pleszew, model: CBA-2. Capacity: 100 liters, load: approx. 60 kg.
used
Used copper coating pan manufactured by Spomasz Pleszew with a tilting drum. Capacity: 100 liters, input: about 60 kg. After general renovation.
used
Promag 50 50H50-10W1/0 DN50 stock: 1629 Promag 50 50H50-10W1/0 DN50 stock: 1621 Promag 50 50H50-4L13/101 DN50 stock :1622 Promag 50 50H50-72V3/125 DN50 stock:1630-1 SOLD All I-out (HART), F-out All tested and in good working condition!
used
Endress + Hauser Promah H 300 5H3B50-L162/0 ser nr. RC088519000 PROFINET DN50