We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
used
Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm
used
Diatomaceous earth filter capacity 45 liters, operating pressure 2.5 bar. Suitable for filtration of cutting oils of automatic lathes.
used
Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...
used
Hobart A 200 Planetary Stirrer 3 speed full gearbox 1st gear 107 rpm 2nd gear 198 rpm 3rd gear 361 rpm Boiler capacity 20 l Very good operational condition, directly from production!
used
Three-roller Manufacturer: Joseph Vögele AG Type: PW 3103 Item #: 713345 Year of construction: 1965 LWH: 550 x 850 x 1200
used
Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;
used
centrifugal pump Manufacturer: Hilge Type: Durietta I-100-60,75 Item #: S7 6253 Engine power: 0.86 kW LWH: 370 x 240 x 280 mm
used
centrifugal pump LWH: 1000 x 380 x 570 mm Manufacturer: SABS (South Africa) Engine power: 15 kW with cover Speed: 1450 rpm
used
centrifugal pump Manufacturer: GEG Alsthom Electrical Machines (Australia) Item #: 0412280/10/VD Power: 5.5 kW Speed: 2880 rpm LWH: 750 x 350 x 500 mm
used
Centrifugal pump Manufacturer: VEB Kyffhäuserhütte Artern Type: KSP 65/180-1,3 Item #: 98605 Year of construction: 1987 Power: 3.8 kW standing on feet very good condition LWH: 560 x 250 x 450 mm
used
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm
used
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm
Melting vessel Manufacturer: Binder GmbH (Crailsheim) Factory No.: 1) 6550/1 2) 6550/3 3) 6550/6 4) 6550/8 with agitator, with controlling system Power: 0.18 kW Speed: 1320 rpm very good condition Year of construction: 1997 LWH: 900 x 900 x 2100 mm
Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions
Temperature control unit Manufacturer: gwk Model: teco wv good condition with operating instructions Touch panel LWH: 1100 x 330 x 750 mm
Temperature control units Manufacturer: gwk Model: teco wv Machine no: 1) S001 2) S010 3) S030 4) 567 good condition with operating instructions Control via touchpad LWH: 1300 x 320 x 950 mm 4 pieces available
used
vacuum pump Manufacturer: Rieetschle Type: TR 40 V (91) Year of construction: 1988 Pumping speed: 45 m³/h (water) very good condition with vacuum regulator valve three items in stock with operating instructions LWH: 500 x 350 x 500 mm
used
Processing pump Manufacturer: Maso Sine Pump Type: SPS-3" No°: 61210497 speed-controlled good condition with cover LWH: 1600 x 700 x 520 mm
used
Excenter screw pumps Manufacturer: Netzsch Type: 1) NM NE 40A - 595 376 2) NM NE 40A - 869 334 Power: 3.7 kW / 4.4 kW speed-controlled Speed: 1420/2860 rpm very good condition LWH: 2000 x 400 x 450 mm two items in stock
used
Excenter screw pump Manufacturer: Netzsch Type: NMNL50871184 Power: 2.2 kW with spare parts very good condition LWH: 2000 x 500 x 400 mm
used
Processing pump Type: PLC-2.5" Item #: 105670604 Manufacturer: Maso Sundyne Corp. very good condition LWH: 1100 x 400 x 550 mm
used
Processing pump Manufacture: Maso Sundyne Corp. Type: PLC-2.5" Item #: 101920104 Power: 1.1 kW Speed: 1410 rpm LWH: 1100 x 300 x 430 mm
used
Processing pump Manufacturer: Maso Sine Pump Type: SPS-4" No°: 31260692 good condition Power: 11 kW Speed: 1450 rpm LWH: 1500 x 700 x 700 mm
used
Excenter screw pump Manufacturer: Netzsch Type: NM053BH02S12H Item #: 330886 Year of construction: 2001 Power: 3.0 kW Speed: 1400 rpm very good condition with spare parts LWH: 1800 x 270 x 300 mm
used
Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.