machines and plants for process engineering used for sale (7,692)

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

General SKU219Y069 MakeEuromilling Serial9995357 TypeAD 750 Main Features MaterialStainless steel Motor1.1 KW Inlet diameter100 mm Width100 mm Specified Features - Hammer Mill MaterialMild steel, Stainless steel 1.4301 (304) Hammer Mills Hammer millcheck Grinding room sizeø 235 mm Moving hammers14x Hammer width20 mm With sieve cagecheck Housing dimensions ø 235 mm Inlet100 x 70 mm Motor1,1 kW (400 V, 2855 rpm) Speed2855 rpm Information LocationBarneveld With switchcheck Floor space0,80 x 0,60 m Total height1,20 m Weight40 kgHammer MillsEuromillingMills > Hammer MillsBrand > Euromilling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

General SKULY003 MakeAlfa Laval TypeAlfaFlash MVR system Main Features MaterialStainless steel Motor110 KW Surface1.1 m2 Specified Features - Film evaporator Max. temperature110 °C With variable speed drivecheck With condensercheck MaterialStainless steel 1.4401 (316), Titanium Information No.DE21-1026 Year of construction2021 With switchgearcheck Extra SpecificationsThis machine (Elemetal Zinc Sulphate MVR System) is an evaporation/crystallization unit that concentrates zinc sulphate solution past saturation so zinc precipitates as ZnSO₄·1H₂O crystals. The crystals are then separated from the mother liquor in a decanter centrifuge, producing a solids cake for downstream drying and clean condensate that can be reused. : The complete plant/module consists of (main machines/equipment): Feed section: feed pump and feed preheater: Feed to the module: 1065 kg/h, 50° ...

Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible.

A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.

Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.

General SKU397X1162 MakeDe Dietrich LocationBarneveld CEcheck TypeAE1600 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1600 Ltr. Motor5.5 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity1600 l. (2316 l.) Vessel sizesø 1400 x 1800 mm ManholeDN350/450 Top connectionscheck OutletDN100 With jacketcheck Max. temperature—10 / 200 °C With anchor stirrercheck Motor5,5 kW 400 V, 1500 rpm (Ex) Speed mixing shaft40 rpm Information No.54544 / 75109 Year of construction1984 Floorspace1,9 x 1,9 m Total height2 m Weight4500 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU397X1098 LocationBarneveld CEcheck MakeDe Dietrich TypeBE—1600—1400 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume1600 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity1600 l. (max 2310 l.) Vessel sizesø 1400 x 1765 mm Dished bottomcheck Dished top sidecheck Top connectionsDN50 — DN200 OutletDN100 With jacketcheck Max. temperature200 °C With propellor stirrercheck Motor4 kW (400 V, 1800 rpm (Ex)) Speed mixing shaft23 — 117 Rpm Information No.69303 Year of construction2008 Mounted on legscheck Floorspace1,68 x 1,68 m Total height3,8 m Weight3160 kg Extra SpecificationsATEX Design Information The equipment has been :designed in accordance with Directive 94/9/EC ( ...

Stock number: PT1571, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: On a stainless foundation, Motor: 2,2 kW - 220/380 Volt - 248 rpm., Theoretical capacity: 3800 l/h., Working pressure : Max 8 bar, Dimensions inlet: 40 mm., Dimensions outlet: 40 mm., Manufacturer: Fristam, Type: FLFN 75S, Other: Horizontal throughput

The Niehoff D631 is a high-performance double-twist bunching machine designed for the production of copper strands and the stranding of insulated wires. By 2014, this model was well-established for its "Eco-Bow" energy-saving design and high precision in spooling. Production Performance - Max. Production Speed: 300 m/min - Max. Number of Twists: 6,500 twists/min - Cross Section Range (Cu soft): 0.09 – 6.0 mm² - Lay Length (Infinitely Variable): 6 – 100 mm - Twist Direction: S or Z Spool & Winding Dimensions - Max. Spool Flange Diameter: 630 mm - Total Spool Width: 475 mm - Max. Spool Capacity: approx. 750 kg - Core Diameter: 224 mm – 250 mm - Bore Diameter: 56 mm Find more here - / Contact us at -

A chemical pump in its original packaging is offered.

Manufacturer Transtherm Cooling Industries Model TD90W/VEE-212/D Dry Air Cooler Year 2023 Condition Used Stock Number SBS20220469

General SKU424X1321 LocationBarneveld MakeLödige Main Features MaterialStainless steel Volume220 Ltr. Motor18 KW Specified Features - Universal mixer MaterialStainless steel 1.4301 (304) Universal mixercheck Capacity220 l. Vessel sizesø 785 x 500 mm With covercheck InletDN150 Pneumatic operated outletcheck OutletDN150 With motor9,5/11 kW, 400 V, 1500/3000 rpm With variable speed drivecheck Rotor speedLow speed 296,4/149 rpm, high speed 1880/940 rpm With lump breakercheck With motor4,9/5,9 kW, 400 V Information TypeMGT 250 Mach.No.14180 Year of construction1998 Mounted on framecheck With switchgearcheck Floorspace2,20x1,00 m Total height1,55 m Weight1100 kgUniversal mixersNew arrivalsLoedigeMixers > Universal mixersNew arrivalsBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU206Y010 MakeJ. Engelsman AG Ludwigshafen Serial40199 TypeS-250-DN250 No.40199 Main Features MaterialStainless steel Motor0.25 KW Inlet diameter300 mm Specified Features - Rotating valve MaterialStainless steel 1.4552 Rotary valvecheck Rotor diameter300 mm Rotor width300 mm Number of locks:8 Lock sizesa: 83 mm: b: 10 mm, h: 85 mm: H: 275 mm Capacity1,09 l. (8,72 l.) Inletø 300 mm Inlet flange sizesø 400 mm Outletø 300 mm Outlet flange sizesø 400 mm Installation height400 mm With motor0,25 kW 400 V 1350 rpm (Ex) Rotor speed10 rpm Outside bearingscheck Capacity87,2 l/min.: 5 232 l./h Information Year of construction2011 LocationBarneveld Weight175 kg CEcheckRotating valvesJ. Engelsmann AG LudwigshafenRotary valves > Rotating valvesBrand > J. Engelsmann AG Ludwigshafen What you can expect from Foeth: -- Machine is in working condition -- At a re ...

General SKU210X061 MakeTycon LocationBarneveld CEcheck TypeBE 4000 Pressure Working pressure20 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity5425 l., (4000 l.) Vessel sizesDia. 1700x2300 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN100 With jacketcheck 550 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor15 kW, 400 volt, 1450 rpm, (Ex) Speed mixing shaft20-120 rpm Glass Reactors MaterialGlass - Enamel Information No.9950 Year of construction2002 Floorspace2,0x2,0 m Total height5,30 m Weight6700 kg Extra Specificationsreactor comes with outletvalve. a hastelloy spray ring is installed in the reactor. Glass-lined ReactorsTycon ItalyReactors > G ...

General SKUR0279 MakeKonrad Reitz Ventilatoren GmbH & Co. KG LocationBarneveld CEcheck TypeKXE 200-002530-00 Pressure Pressure buildup0.2 Bar Main Features Capacity25 m3/Min Motor30 KW Pressure0.2 Bar Specified Features - Blower Blowercheck Capacity1500 M3/h Motor30 kW 400/690 Volt With sound absorbercheck Inletdia. 180mm Outletdia. 90mm Information No.290567 Year of construction2012 Floorspace2,3x1,6 M Total height4,5 M Weight1250 KgBlowersReitzBlowers > BlowersBrand > Reitz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU of 3400 liters with jacket and rear agitation three. Year 2019. On 3 labels. 495mm manhole Volume Total capacity 3400 L Material Hastelloy C-276 Technical characteristics Year of manufacture 2019 Equipment Setup Agitator Shirt About Labels Equipment dimensions Inside diameter 1600 mm Body Height 1600 mm Transportation Information Width 2300 mm Height 3000 mm Weight 1150 Kg Manufactured by Grau Industrial Facilities

Stainless steel reactor of the TINSMACAL brand of 2000 liters with jacket. Year 2007. Rear agitation tripala. On 3 labels. 350mm manhole Volume Total capacity 2000 L Material Stainless steel Technical characteristics Year of manufacture 2007 Equipment Setup Agitator Shirt About Labels Equipment dimensions Inside diameter 1390 mm Body Height 1350 mm Transportation Information Width 2100 mm Height 2500 mm Manufactured by Tinsmacal

Stainless steel reactor of the brand AXOMATIC model FUS20. Year 2013. The AXOMATIC FUS20 reactor is an AISI 316 stainless steel reactor with a total capacity of 25 liters, designed for mixing, heating and reaction processes in laboratory, pilot plant and small-scale production applications in the chemical, pharmaceutical, cosmetic and food sectors. Capabilities Total body volume: 25 liters Minimum working volume: 6 litres Stirring System The reactor is equipped with a double stirring system, which allows great process versatility: Pallet Rack Agitator Speed: 5 – 40 rpm Motor power: 0.37 kW Cowles type agitator (high speed) Speed: 200 – 1,000 rpm Engine power: 0.56 kW This combination allows working with both viscous products and processes that require high shear. Construction Materials Product contact parts: AISI 316 stainless steel Shirt:  ...

Unused Briggs of Burton process vessel, approximately 1,200 liters, in 316/316L stainless steel. The unit measures approximately 1,200 mm in diameter x 870 mm on the straight side. The unit features a bolt-on domed lid and welded hemispherical bottom. Internal design pressure rated for 10 bar/full vacuum in a range of -20 to 210 °C. 304/304L stainless steel outer jacket, rated for 10 bar design pressure/full vacuum in the range of -20 to 210 °C. The unit has a 316/316L stainless steel top-entry gate type agitator equipped with 11 kW motor/gearbox driven PTFE wall scrapers. The unit includes Silverson Model BE600 Bottom Inlet Emulsifier in 316/316L Stainless Steel, Driven by 22 kW Motor. The unit is mounted on 304/304L stainless steel legs. Volume Total capacity 1200 L Material Stainless Steel 316/316L Shirt or mid-calf material Stainless Steel 304/304L Technical characteristi ...

DMN WESTINHOUSE brand rotary valve model AL 250 3N. Motor 1.1 kw 1400 rpm 50 hz 220 v. Flange outer diameter 410 mm Inner diameter flange 250 mm Technical characteristics Model AL 250 3N Transportation Information Length 700 mm Width 700 mm Height 460 mm Status In your state Manufactured by DMN WESTINGHOUSE

DMN WESTINHOUSE brand rotary valve model AL 250 3N. Motor 1.1 kw 1400 rpm 50 hz 220 v. Flange outer diameter 410 mm Inner diameter flange 250 mm Technical characteristics Model AL 250 3N Transportation Information Length 700 mm Width 700 mm Height 460 mm Status In your state Manufactured by DMN WESTINGHOUSE

GRUNDFOS brand in-line dry break pump model TPD 50-430/2 A-F-A-BQQE. Technical characteristics Model TPD 50-430/2 A-F-A-BQQE MANOMETRIC HEIGHT 29.6 Maximum pressure 16 bar Maximum temperature 120 ºC Documentation No documentation Maximum Flow Maximum flow rate 32.7 m3/h Status In your state Manufactured by GRUNDFOS

910-liter 316 stainless steel reactor with jacket made of 316L stainless steel, hermetic heat-insulation, control panel and agitation. Dashboard Description: Endress+Hauser HMI Display "Emergency reset" pilot Emergency mushroom Display RPM Product temperature display 3-position stirrers selector (1- upper agitation, 2- lower agitation, 3- both at the same time) Off-center three-blade helix shake on the upper bottom. Manufactured by SPX, Lightnin SR5S200 model with a 0.37 kW motor. Magnetic stirring on the bottom with a 0.55 kW motor. Volume Total capacity 910 L Material Stainless Steel 316/316L Equipment Setup Agitator Heat Burning Transportation Information Length 1600 mm Width 1200 mm Height 2100 mm Weight 1000 Kg Status In your state

Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW Technical characteristics Model ARR-8 Year of manufacture 2016 ENGINE 0.26 kW Documentation No documentation Maximum Flow FLOW 56 L/h Status Unused Manufactured by New York Blower Company

Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW Technical characteristics Model ARR-8 Year of manufacture 2016 ENGINE 0.26kW Documentation No documentation Maximum Flow FLOW 56 L/h Status Unused Manufactured by New York Blower Company

ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

Reference : C14241 ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

Vertical stainless steel tank with a total capacity of 750 litres About 3 legs. Kollper Funds. DN50 bottom outlet DN25 DN40 Top Connections Side connections DN25 DN50 DN80 Volume Total capacity 750 L Material Stainless steel Equipment dimensions Inside diameter 900 mm Body Height 1000 mm Transportation Information Width 1000 mm Height 2050 mm Documentation No documentation Status In your state Manufactured by Unbranded