machines and plants for process engineering used for sale (7,416)

General SKU394U1128 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Heating capacity300 kW Electric capacity306,45 kW, 400Volt Temperature-40°C/+200°C With pumpcheck Capacityunknown. Motor5,5kw, 400/690 volt, 2880rpm (ex) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HHKT-EX Mach.No.HKS08019 Year of construction2008 Floorspace2,15x1,00 m Total height2,50 m ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalTemperature control unitsGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood a ...

General SKU394U1111 MakeLauda TypeTR400HK/K-EX Mach.No.HSK13074 Year of construction2013 Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt, , (Ex) Temperature-35/130 ºC With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchcheck Floorspace1,75x1,0 m Total height2,5 m Weight1800 kg CEcheck ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalTemperature control unitsGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additives ...

Used shredder / shredder from Moco type AZ 17E/1210. Shredder MOCO AZ 17E, shredder with slow and quiet toothed working shafts. Low vibration and minimal maintenance, compact Robust welded structure, low power consumption, Individually interchangeable cutting discs. Very good inlet behavior, even for large bodies. High degree of fineness. The material is stopped by an optional sieve inside the cutting chamber for repeated shredding until its dimensions are smaller than the sieve openings. The control of the AC gear motors is equipped with an automatic overload-dependent reverse adjustment. BANDWIDTH EXAMPLE 15 to 18 cubic meters of loose mixed waste per hour. DIMENSIONS • Cutting section 932x912mm • External dimensions 2440x1112x730mm • Weight 4600 kg. • Drive power 2×15 kW • Voltage 400V/50Hz Year of manufacture 2010.

General SKU399X1181 LocationBarneveld CEcheck MakeAermec Main Features Heating (medium)Ammonia Capacity19.7 KW Temp.7 °C Specified Features - Temperature control unit Temperating machinecheck With coolingcheck Capacity19,7 kW Temperature7 °C With pumpcheck With temperature controllercheck With controlcheck MaterialStainless steel General TypeWRL081 EA P Mach.No.646695 Year of construction2017 With switchcheck With switchgear(as is) Floorspace0,78 x 1,15 m Total height1,1 m Weight450 kg Extra information Extra SpecificationsRefrigerant: R410A Refrigerant charge: 0,50 kg Pump type: On-off Pump side: System side Compressor type: Scroll Generic medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalTemperature control unitsGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDe ...

A container mixer, probably Engelsmann, is available. Container dimensions X/Y/Z: 1200mm/1200mm/900mm, volume: approx. 500l, machine dimensions X/Y/Z: approx. 2750mm/2000mm/2200mm. An on-site inspection is possible. The manufacturer statement is a well-founded assumption. Expected to be available 2026.

A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.

A universal batch mixer WP is available. Volume: approx. 140l, machine dimensions X/Y/Z: approx. 1500mm/900mm/1200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.

Used vacuum mixer from Fryma type DT 1500. The mixer has an anchor mixer with Teflon scrapers, an agitator with a dispersing disc and a heating jacket. PLC control. Total capacity 1500 liters. In addition, I have a colloidal mill / homogenizer from Fryma type MZ 120.

Used belt dryer from Hans Binder Specifications: belt width 2.62m Length of belts 14m total length 25m total height 6.2m total width 2.9m 5 levels of drying belt The dryer has 2 heating zones 1- 60-110 degrees. C, 2-70-90 deg. C The tape is made of perferized stainless steel tape. has brushes for cleaning the tape apples, celery, dill, beets were dried. Year of manufacture 1997 Gas burner dryer.

Used ultrafiltration by Membraflow. Capacity 12,000 litres/h. Year of manufacture 2004. CE The filter worked on concentrates and fruit juices.

Used ultrafiltration from APV with a capacity of 8000 liters/h.

Available from May Machine name: Used mobile sludge dewatering system in container Manufacturer: Alfa Laval Type: AVNX 919 Year of Make: 1994 Max. drum speed: 3,250 rpm Material: Stainless Steel Inner diameter drum: 353 / 202 mm Permissible. Sediment density: 1.2 kg/dm3 Dimensions: L 7,500 x W 2,450 x H 2,550 mm Curb weight: approx. 6-7 tons Tech. Documentation: Yes Nkjwoyxl R Es Rxtpqsw Note: Available from May Accessories: container, polymer plant, feeding pump, control cabinet, macerator, discharge conveyor Condition: Used Price: On request

A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible.

Goedhart DVS 84637 Internal volume 150 dm3 TS +55/-5 C PS/PT 28/40 bar Fluid R404A

Stock number: PT1572, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: On a stainless frame, Dimensions: L 1000 x W 400 x H 600 mm, Motor: 1,5 kW - 220/380 Volt - 287 rpm., Theoretical capacity: 3960 l/h, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Other: Horizontal flow - Flushed sealings

Stock number: PM1576, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Dimensions: L 1050 x W 250 x H 330 mm, Motor: 2,2 kW - 220/380 Volt - 1400 rpm., Theoretical capacity: 7000 l/h, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 40 mm, Dimensions outlet: Ø 40 mm

This is an opportunity to acquire a complete, ready-to-restart feldspar processing plant and open-pit quarry.The facility has been in operation since 1909 . The operation was closed in early 2023 for strategic and market reasons — not due to any fault in the asset itself. The site includes a fully equipped processing factory, an open-pit quarry with an active environmental and quarrying permit valid until 31 December 2052 all buildings, and approximately 26 hectares of land. The quarry permit is transferable to a new owner. Key Points : - High-value feldspar deposit: Mix of potassium and sodium feldspar (50/50). Low iron content of 0.20% in grinding plant output and 0.14% at the open-pit face. - Strong proven yield: 17,000 tonnes per blast. Approximately 2.6 tonnes of feldspar per cubic metre of solid rock. - Crusher output: 0.4 mm particle size. Capacity of 40 tonnes per hour. - Gri ...

A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.

Used milk centrifuge made by Alfa Laval, type: 3191. New: 1973

O.M.S. SALERI, X-188, Item 10, Class 150#, Body CD3MN

Stock number: F1132, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Labelling machine, Standing: On legs, Dimensions: L 2050 x W 700 x H 1600 mm, Label size: Max H 120 mm, Label placement: Top, Conveyor: Belt, Conveyor dimensions: L 2000 x W 40 mm, Type: Serie 1000 + M-01, Other: 2 pcs. side belt - Hot print

Stock number: F1127, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Standing: On legs, Construction: Erecting of bottles etc., Dimensions: L 2350 x W 1100 x H 1550 mm., Conveyor: Plastic lamella, Conveyor dimensions: L 1300 x W 82 mm., Manufacturer: M. S. Packaging, Type: FLR 1000, Year: 1999

General SKU221Y083 LocationBarneveld Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Eccentric Screw Pumps MaterialStainless steel General MakeNetzsch SerialD4095257/6300005469/0100 Year of construction2021Eccentric Screw PumpsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsNetzschPumps > Eccentric Screw PumpsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Ind ...

General SKU221Y085 MakeRieger Serial20200536-10 Type3850 l Main Features MaterialStainless steel Volume3850 Ltr. Pressure1 Bar Specified Features - Vertical tank Closed vertical tankcheck Capacity3500 l. (3850 l.) Vessel sizesø 1800 x 2000 mm Conical bottomcheck Manholeø 420 mm Top connectionsDN40 OutletDN50 Max. temperature50 °C MaterialStainless steel 1.4404 (316L) General Year of construction2021 Mounted on legscheck LocationBarneveld Floorspace1,80 x 1,80 m Total height3,00 mGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersVertical tanksCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPaints & coatingsOils & fatRiegerIndustries > ...

General SKU431X1350 MakeGeppert Band Conveying Systems TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height30 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm MaterialPlastic, Stainless steel General Mounted on framecheck LocationBarneveld Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 m CEcheckConveyor beltsStarchRubberAgrochemicalsSpicesPaper & otherOrganicsE-waste & metalAnimal feedOther feedPlastic & rubberConsumer wasteGeppert-Band GmbHConveying systems > Conveyor beltsIndustries > Food & Feed > StarchIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndus ...

Various dosing containers, different sizes.

Used disc centrifuge made by Westfalia, type: SA 80. New: 1998. Capacity: 15.000 l/h.

Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available.

Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Linden Suitable for highly viscous, tough, plastic or sticky materials such as adhesives, sealants or pastes. Thanks to their two interlocking Z-shaped kneading arms, they can process substances that are hardly homogenizable with normal mixers. - Make HermannLinden, built in 1965 - Machine type K II 60, factory no. 605 - Refurbished in 2025, electrical equipment completely new - Frequency-controlled electric motor 4.0 KW - Frequency converter Optidrive E3 IP66 Outdoor with main switch, potentiometer and reversal of the direction of rotation - Control box with main switch, emergency stop and undervoltage tripping - Speed from approx. 15 to 60 rpm. - Belt drive - 2 Z-waves - All parts in contact with the product in copper and stainless steel - Single-walled copper container approx. 600 x 600 x 450 mm = appr ...

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.