milling machines wood used for sale (631)

JAROMA DYFD-2 combined milling machine/saw Product name: Milling machine Type: DYDF-2 Manufacturer: JAROMA (Poland) Machine number: 3814 Year of construction: 1982 Condition: used, checked Technical details: - Spindle diameter: 25 mm - usable height (spindle height): 110 mm - Spindle inclination: 5° in both directions - Table dimensions: 1,120 x 750 mm - 2 x suction nozzles, diameter 100 mm - 1 x additional 380 V connection for a feed - Spindle height and inclination can be adjusted manually - removable drawer for cleaning - Machine dimensions (set-up) L x W x H): 1,120 x 830 x 1,100 mm Engine data: - Voltage: 380 V - Frequency: 50 Hz - Power: 3.8 / 3.0 kW - Speeds: 2,900 / 1445 rpm (2 speeds) Transport dimensions (L x W x H): 1,200 x 840 x 1,220 mm (on EURO pallet) - Number of packaging units: 1 - Weight: approx. 700 kg The machine has been overhauled  ...

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max.  ...

CNC machining center Manufacturer: MKM Model: UNI_Compact Year of construction: 1999

Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120

Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door swi ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

technical details: - Milling depth: 0 - 80 mm - Diameter suction nozzle: 60 mm - Swallow size: W-1/2/3 - Dimensions (W x H x D): 600 x 770 x 540 mm - Weight: 19 kg - Operation: manual - Workpiece clamping: manually via hand lever - Passage height: 110 mm Stop elements: -1 x Stump Stop - 1 x stop plate 45° (angle stop) - 1 x measuring scale (All settings are done manually.) Controls: - 1 x milling depth adjustment - 1 x workpiece clamping - 1 x chip breaker Motor data (milling unit): - Power: 0.5 kW (530 W) - Voltage: 230 V - Frequency: 50 Hz - No-load speed: 29,000 rpm The machine mills one keyway per work cycle for the above-mentioned dovetail sizes. All Hoffmann accessories can be used on this machine. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once  ...

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Okoma PN 2 tenon cutter Brand: Okoma Type: PN2 Year of construction: M-No.: Machine data: saw: 3.0 KW, 2.800 rpm, tool: ø400 mm, 140 mm cutting height - turret head cutting height Slot spindle 7.5 kW - 2,800 rpm, tool: ø400 mm, 4,000 rpm, spigot length: 170 mm spindle clamping length: 160 mm Table: Electric, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 2.2 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Swing Chiselstemmer Measuring machine Stemmer swing chisel

Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

Balestrini linear milling machine two milling units pneumatic pressure of elements

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5