used Milling Machines for sale

Milling head SK40, with flange, with quill and tool clamp, swivel. good condition. Is from a CNC tool milling machine MAHO 700C, Would also have a smaller one from a DECKEL FP3A. Also with quill and clamp. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

Description: Seller cannot disassemble and load himself dimensions unknown Spindle overhaul was done in 2018 (€ 58,501,--) Automation is currently not working (circuit board is broken cost € 10,000,--)Approx. Onsite Dimension. (l x w x h): 9 x 9 x 9 mm, weight approx.: 9,999 kg

Description: - End milling machine for aluminum profiles - Serial number 9000575 - Milling capacity 250 x 120 mm - Vertical stroke approx. 110 mm - Motor power 0.75 KW - Rotational speed 2800 rpmApprox. Onsite Dimension. (l x w x h): 1,200 x 750 x 1,300 mm, weight approx.: 160 kg

- Digital display Heidenhain. - Accessories available. Workspace X-travel 420 mm Y-travel 250 mm Z-travel 340 mm Spindle speeds 12 Speed range 50 - 2240 rpm. Spindle motor power (at 50 Hz) 1500/3000, 1.1/1.85 kW Milling table Clamping surface vertical 200 x 630 mm Clamping surface fixed angle table 250 x 700 mm Number of T-slots 3/5 T-slot width 12-H7 mm T-slot spacing 45 mm Feed range 8 – 400 mm/min. Recording ISO 30 Dimensions and weight length x width 1400 x 1400 mm Total height approx. 1400 mm Weight approx. 850 kg

Heidenhain Active - Digital Display Stepless feed lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping area 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid response in 3 axles 1400 mm/min Recording ISO 40 Vertical / Horizontal Pinole extendable Mass approx. 1.2 x 1.2 x 1.6 m

For sale is: 1 piece used tool milling machine Manufacturer: Mikron Type: WF51D Year: 1980 x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 3150 rpm Operating voltage 380 V Control : Heidenhain TNC 355B Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant reservoir electronic handwheel Machine comes with a wide range of accessories, see pictures (incl. tool cabinet). The milling machine can be viewed in our warehouse in 09599 Freiberg.

X-axis: 930 mm Y-axis: 300 mm Z-axis: 500 mm Table dimensions: 1450 x 320 mm Spindle Holder: ISO40 Spindle speed: 1500 rpm. Digital readout: Sony 3 axis readout Country of origin: Spain Machine weight: 3000 kg Machine LxWxH: 1900 x 1800 x 2000 mm

Year of construction: 2017 Control: Heidenhain TNC 640 Condition: Mint Condition - Double gantry drive in the X and Y axes - Vibration-damping polymer concrete bed with foundation-free 3-point installation - Ball screw with directly coupled AC servo motors - Absolute measuring systems with (2) glass scales each in X and Y axes for increased accuracy -Travel: - X-axis: 800 mm - Y-axis: 600 mm - Z-axis: 500 mm - Max. travel speed 45/m/min - Max. acceleration 10/m/s² - HF spindle HSK E 50 - Spindle power 25kW, speed 1 to 18,000 rpm, torque S6 (20%) 64 Nm - Tool changer HSK E 50, 72 – compartment - Precision package 1 with heat exchanger circuit +/- 0.1 °C and drive cooling - Precision package 2 with position and geometry error compensation X/Y/Z axis - T-slot table - Minimum quantity lubrication, external spindle - Blowing air spindle external - Automatic central  ...

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

Description: Techincal specs: Spindle: ISO40 Spindle speeds: Inifinitely Variable 70-4000 rpm Feed and rapids on X-axis Quill with automatic feed Spindle breakApprox. Onsite Dimension. (l x w x h): 1,650 x 200 x 2,400 mm, weight approx.: 1,500 kg

-Digital display -Accessories available. Clamping surface 1100 x 300 mm Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Weight of the machine CA. 2050 kg

Digital display Anilam Table 1250 x 350 mm Longitudinal path 850 mm Crosspath 250 mm Vertical path 470 mm Spindle speeds 45 - 2000 rpm. Recording ISO 40

2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling

Description: Technical specs: Spindle: Morse taper 4 Spindle speeds: 100-2700 rpm Cabinet with accessories Cabinet size: 500x500x900 mm Table size: 450x200mmApprox. Onsite Dimension. (l x w x h): 800 x 750 x 1,600 mm, weight approx.: 500 kg

Description: Technical specs: Spindle: ISO30 Spindle speeds: Inifinitely Variable 58-2000 rpm Table size: 600x210 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 920 x 1,700 mm, weight approx.: 500 kg

Description: Technical specs: Spindle: ISO40 Spindle speeds: 38-1500 rpm Table Size: 1100x250 mm 2 Cabinets with accessories (+150 pcs) Cabinet size: 770x790x1250 mm Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,700 mm, weight approx.: 750 kg

Digital X-way 700 mm Y-way 250 mm Z-way 490 mm Spindle speeds 38 - 1510 rpm. Recording ISO 40 Feed 6 - 1050 mm/min Rapid speed 3500 mm/min Clamping area 1100 x 305 mm Universal milling head 0° - 270° swivel Dimension 1930 x 1560 x 1720 mm Machine weight approx. 2100 kg

Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) � ...

Digital X-travel 450 mm Y-travel 170 mm Z-travel 400 mm Table size 300 x 600 mm Spindle speeds 60 - 1200 rpm. Recording ISO 30 Machine weight approx. 600 Kg

Description: Longitudinal travel of upright X 10,000 ,mm Spindle head vertical travel Y 3,300 mm RAM transverse travel Z 1,100 mm Spindle quill travel W (boring bar) 800 mm Translating travel C 2,000 mm Turntable plate positions B 360,000 n Turntable size 2,700 x 2,700 mm Drilling unit vertical travel V 2,700 mm Drilling unit transversal travel U 500 mm SELCA S4045PD control Serial number 02-021.021 Dig depth 2000 mm z-motion: 1,200 mm, table surface area l x w : 2700 x 2700 mm, control: SELCA 4045PD, power capacity - spindle: 50 kW, weight approx.: 160,000 kg, Approx. Onsite Dimension. (l x w x h): 19,000 x 10,000 x 6,000 mm

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum

x-travel: 720 mm y-travel: 255 mm Z-Travel: 400 mm clamping surface area: 1000 x 250 mm range of revolution per miute: 40...3150 / 8 step U/min tool taper: ISO 40 (SK40) milling head swivable : +/- 90 ° Quill Stroke: 127 mm feed:Z: 8,5...136 / with 9 step rapid traverse:: X/Y/Z: 2500 mm/min feed:: X/Y: 28...450 / with 9 step mm/min. total power requirement: 3.2 (4 kVA) kW dimension machine approx. LxWxH: 1.8 x 1.6 x 2.4 m Weight of the machine approx.: 1,5 t

x-travel: 850 mmy-travel: 500 mmz-travel: 450 mmtable-size: 1250x500 mmspindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/minweight of the machine ca.: 5.2 tHEIDENHAIN TNC-355Misc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine SN55/2000 with steady rest.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: / collet diameter: / turning speed range: / U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling cutters, End mills, Die mills, Unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire lot ! Please request a list !

Sell a milling machine with some accessories. The milling machine works. Suitable for smaller metal construction companies.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 585/600 mm: 465/480 mm: 385/400 mm: 900x500 mm: 1200x250 mm: 40-2000 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 feed range: 0-2000 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 no. of turning speeds: 18 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-Trade X300 Year of construction: 2012 more information will follow incl. accessories

X-axis: 600 mm Y-axis: 210 mm Z-axis: 425 mm Table dimensions: 950 x 230 mm Spindle holder: ISO 40 Spindle speeds: 31.5 - 1000 rpm. Equipped with: - Horizontal spindle -Milling cutter - Useful storage Motor power: 1.5 kW Machine LxWxH: 1400 x 1250 x 1800 mm Machine weight: 1200 kg

X-axis: 600 mm Y-axis: 210 mm Z-axis: 425 mm Table dimensions: 950 x 230 mm Spindle holder: ISO 40 Spindle speeds: 31.5 - 1000 rpm. Equipped with: - 2x horizontal spindle -Milling cutter Motor power: 1.5 kW Machine LxWxH: 1400 x 1250 x 1800 mm Machine weight: 1200 kg

: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- X: 560 mm - Y: 320 mm - Z: 400 mm - Clamping surface: 450 x 950 mm - Quill stroke: 100 mm - Speed range: 25 - 2000 rpm - Spindle mount: SK 40 - Spindle drive: 3 kW - Total power: 3.5 kW - Machine weight: 1,800 kg - Space requirements (W x D x H): 1.5 x 1.8 x 1.8 m Details automatic feed in all axes, beautiful machine, good condition, ready for immediate use Accessories Vise, counter holder, various mounts, various collets, documentation

Offer 21537 Specifications: - Table size approx. 1100 x 260 mm - Working range of the axes - X (longitudinal) approx. 815 mm - Y ( landscape ) approx. 400 mm - Z (vertical) approx. 410 mm - Milling unit swivel + tilt + rotatable - Horiz. Displacement of the milling unit 410 mm - Table can be swivelled 45° on both sides - Max. distance between milling spindle – table surface 500 mm - Tool holder ISO - Quill stroke mm - Working spindle speeds adjustable in steps 67 - 1400 rpm - Mot Table Feeds X ; Y ; Z - Coolant device - Drive 400 V / 4.5 kW - Space requirement approx. W 1900 x H 1900 x D 1900 mm - Weight approx. 3200 kg

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t